Open Access
Issue
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
Article Number 02004
Number of page(s) 13
Section Mechanical Engineering
DOI https://doi.org/10.1051/e3sconf/202455902004
Published online 08 August 2024
  1. Central Statistical Office 1976. Bi-Annual Digest of Statistics, Ministry of Economic Planning and Development. 11(1). [Google Scholar]
  2. Sugar Insurance Fund Board. 2012. Annual Report 2012, http://www.sifb.mu/pdf/ar2012.pdf [Google Scholar]
  3. Statistics Mauritius. 2019, Agricultural and Fish Production, https://statsmauritius.govmu.org/Pages/Statistics/ESI/Agriculture/Agriculture/Agri_Fish_Yr19.aspx [Google Scholar]
  4. Charles, G.M.P. 1973. The manufacture of sugar from sugar cane. Hayne and Gibson, Durban, South Africa. [Google Scholar]
  5. Durmoo, S., C. Richard, G. Beranger and Y. Moutia. 2008. Biocorrosion of stainless steel grade 340L (SS 340L) in sugar cane juice, Electrochemica Acta, 54(1): 74–79. [CrossRef] [Google Scholar]
  6. Van Der Linden, T. 1928. Special Case of Corrosion in the Cane Sugar Factories, Soerabaia, pp 965–968. [Google Scholar]
  7. Goel, P., R. Khosla, L.K. Singhal and R.K. Goyal. 2007. Role of stainless steel to combat corrosion in the Indian sugar industry, National federation of cooperative sugar factories Ltd, 38(12): 39–46. [Google Scholar]
  8. Setareh, M. and R. Javaherdashti. 2003. Assessment and control of MIC in a sugar cane factory, Materials and Corrosion. 54: 259–263. [CrossRef] [Google Scholar]
  9. Panigrahi, B.K., S. Srikanth and J. Singh. 2007. Corrosion Failure in the Sugar Industry: A Case Study, Journal of Failure Analysis and Prevention. 7: 187–191. [CrossRef] [Google Scholar]
  10. Mwaba, M.G. 2003. Analysis of heat exchanger fouling in cane sugar industry, Technische Universiteit Eindhoven, Eindhoven University Press, pp12. [Google Scholar]
  11. Dixon, T., A. Mann, P. Hobson, F. Plaza, S. Pennisi, and R. Steindl. 2003. Application of CFD in the Sugar Industry, Third International Conference on CFD in the Mineral and Process Industries, 2003, CSIRO, Melborne, Australia. [Google Scholar]
  12. McIntyre, K.B. 2002. A review of the common causes of boiler failure, Proceedings of the Annual Congress of the South African Sugar Technologists’ Association, South Africa, 76, pp355–364 [Google Scholar]
  13. Outokumpu (S.E.A.) Pte Ltd, 2018. Cost Effective Use of Stainless Steel in Sugar Industry – The ultimate solution, Sugar Asia, 4(14). [Google Scholar]
  14. Keegain, E., T. Van der Walt. 1991. Epoxy coating applications in the sugar industry, Proceedings of The South African Sugar Technologists’ Association, June 1991, pp. 198–201. [Google Scholar]
  15. Upiah, P.Q. and Surnam, B.Y.R., 2022, Investigation on Corrosion Protection Systems and Wear Problems for a Ship Unloader, International Journal of Surface Engineering and Interdisciplinary Materials Science, 10(1). DOI: 10.4018/IJSEIMS.302236.ASTMG31.2021. [CrossRef] [Google Scholar]
  16. , J., W. Xiong, W. Zhang, W. Li and K. Long. 2016. Study on the high-temperature corrosion behavior of superheater steels of biomass-fired boiler in molten alkali salts’ mixtures, Advances in Mechanical Engineering. 8(11): 1–9. [Google Scholar]
  17. Antunes, R.A., and M.C.L. De Oliveira. 2013. Corrosion in biomass combustion: a materials selection analysis and its interaction with corrosion mechanisms and mitigation strategies. Corros Sci. 76: 6–26. [CrossRef] [Google Scholar]
  18. Rao, N.V., G.M. Reddy and S. Nagarjuna . 2011. Weld overlay cladding of high strength low alloy steel with austenitic stainless steel—structure and properties. Mater Design. 32: 2496–2506. [CrossRef] [Google Scholar]
  19. ASTM G76, 2018. Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets, ASTM International, PA, USA. [Google Scholar]
  20. Barika, R.C., J.A. Whartona, R.J.K.Wooda and K.R. Stokes. 2009. Electro-mechanical interactions during erosion–corrosion, Wear. 267: 1900–1908. [CrossRef] [Google Scholar]
  21. Rajahram, S.S., T.J. Harvey and R.J.K.Wood. 2009. Erosion–corrosion resistance of engineering materials in various test conditions, Wear. 267: 244–254. [CrossRef] [Google Scholar]
  22. Laguna-Camacho, J.R., A.Marquina-Chavez, J.V.Mendez-Mendez, M.Vite-Torres and E.A. Gallardo-Hernandez. 2013. Solid particle erosion of AISI304, 316 and 420 stainless steels, Wear. 301(1–2): 398–405. [CrossRef] [Google Scholar]
  23. Surnam, B.Y.R. and V.C. Oleti. 2012. Atmospheric Corrosion in Mauritius. Corrosion Engineering, Science and Technology, 47(6): 446–455. [CrossRef] [Google Scholar]
  24. Prado, R.V., B. Uquillas, J. Y. Aguilar, Y. Aguilar and F. Casanova, 2010. Abrasive wear effect of sugarcane juice on sugarcane rolls, Wear. 270: 83–87. [CrossRef] [Google Scholar]
  25. Buchanan, V.E., P.H. Shipway and D.G. McCartney. 2007. Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugar industry, Wear. 263: 99–110. [CrossRef] [Google Scholar]
  26. Pisarek, Z. 2019. Failure of a steel boiler chimney caused by corrosion of the structural shell plate, MATEC Web of Conferences 284 09007 ICSF 2019. [Google Scholar]
  27. Malik, A.U., F. Al-Muaili, M. Al-Ayashi and A. Meroufel, 2013. An investigation on the corrosion of flue gas sensor in boiler stack, Case Studies in Engineering Failure Analysis. 1: 200–208. [CrossRef] [Google Scholar]
  28. ZareNezhad, B. 2014. A General Correlation for Accurate Prediction of the Dew Points of Acidic Combustion Gases in Petroleum Industry, Petroleum Science and Technology. 32(16): 1988–1995. [CrossRef] [Google Scholar]
  29. Rockel, M. B. and R. Bender. 2008. Corrosion Handbook, Society for Chemical Engineering and Biotechnology, Frankfurt, Germany. [Google Scholar]
  30. Blanco, J. M. and F. Pena. 2008. Increase in the boiler’s performance in terms of the acid dew point temperature: Environmental advantages of replacing fuels. Appl. Therm. Eng. 28: 777–784. [CrossRef] [Google Scholar]
  31. Gupta, S.K., A. Bajpal and V. Sharma. 2002. Pipeline corrosion in cane sugar industry. Indian Sugar. 52(9): 681–687. [Google Scholar]
  32. Allen, C. A. Ball and B.E. Protheroe. 1981. The abrasive-corrosive wear of stainless steel, Wear. 74: 287 – 305. [CrossRef] [Google Scholar]
  33. Berlanga, C. and J. A. Ruiz. 2008. Study of Corrosion in a Biomass Boiler, Journal of Chemistry, 2013: 272090. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.