Open Access
Issue
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
Article Number 04037
Number of page(s) 10
Section Structural Engineering & Concrete Technology
DOI https://doi.org/10.1051/e3sconf/202455904037
Published online 08 August 2024
  1. Jian-Tong Ding and Zongjin Li (2002) ‘effects of Metakaolin and silica fume on properties of concrete’ ACI materials journal vol.99,no 4 [Google Scholar]
  2. Naresh kumar (2014) ‘A study of Metakaolin and Silica fume used in various cement concrete designs’ international journal of enhanced research in science technology & Engineering, pp: (176-181) [Google Scholar]
  3. S.E. Wallah and B.V. Rangan, Low-calcium fly ash-based geopolymer concrete: Long- term properties, Research Report GC, (2006) 1-46. [Google Scholar]
  4. G.S. Ryu, Y.B. Lee, K.T. Koh, and Y.S. Chung, The mechanical properties of fly ash-based geopolymer concrete with alkaline activators, Construction and Building Materials, 47 (2013) (2013), 409–418. [CrossRef] [Google Scholar]
  5. S. Kumar, R. Kumar, and S.P. Mehrotra, Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer, Journal of Materials Science, 45 (3) (2010), 607–615. [CrossRef] [Google Scholar]
  6. C.B. Cheah, M.H. Samsudin, M. Ramli, W.K. Part, and L.E. Tan, The use of high calcium wood ash in the preparation of Ground Granulated Blast Furnace Slag and Pulverized Fly Ash geopolymers: A complete microstructural and mechanical characterization, Journal of Cleaner Production, 156 (2017), 114–123. [CrossRef] [Google Scholar]
  7. Arunkumar, K., M. Muthukannan, A. Suresh Kumar, and A. Chithambar Ganesh. 2021b. “Mitigation of Waste Rubber Tire and Waste Wood Ash by the Production of Rubberized Low Calcium Waste Wood Ash Based Geopolymer Concrete and Influence of Waste Rubber Fibre in Setting Properties and Mechanical Behavior.” Environmental Research 194: 110661. doi:10.1016/j. envres.2020.110661. [CrossRef] [PubMed] [Google Scholar]
  8. Arunkumar, Kadarkarai, M. Muthukannan, A.S. Kumar, A.C. Ganesh, and R.K. Devi. 2021. “Cleaner Environment Approach by the Utilization of Low Calcium Wood Ash in Geopolymer Concrete.” Applied Science and Engineering Progress 1–13. doi:10.14416/j.asep.2021.06.005. [Google Scholar]
  9. Arunachalam, S.K., M. Muthiah, K.D. Rangaswamy, A. Kadarkarai, and C.G. Arunasankar. 2022. “Improving the Structural Performance of Reinforced Geopolymer Concrete Incorporated with Hazardous Heavy Metal Waste Ash.” World Journal of Engineering, Vol.19(6), pp: 808-821. doi:10.1108/WJE-01-2021-0055. [CrossRef] [Google Scholar]
  10. Suresh Kumar, A. 2022. “Flexural Behaviour of Reinforced Geopolymer Concrete Incorporated with Hazardous Heavy Metal Waste Ash and Glass Powder. “ Materials Science Forum 1048:345–358. [CrossRef] [Google Scholar]
  11. S.K.M. Pothinathan, Pream kumar S, Christopher gnanaraj, Muthukannan Muthaiya, “Research status on electrical and electronic waste as a construction material” AIP conference proceedings (accepted). [Google Scholar]
  12. S.K.M. Pothinathan, Pream kumar S, n arunachelam, Christopher gnanaraj,2022 “Effect of PCB as partial replacement of fine aggregate and coarse aggregate in concrete”, Material today Proceedings, Vol. 49(5), pp: 2369-2373 [CrossRef] [Google Scholar]
  13. Lakhbir Singh, Arjun kumar, Anil singh (2016) ‘study of partial replacement of cement by silica fume’ international journal of advanced research, pp: (104-120) [Google Scholar]
  14. Suresh Kumar A, Muthukannan M, Arun Kumar K, Chithambar Ganesh A & Kanniga Devi R (2022): Influence of incinerated biomedical waste ash and waste glass powder on The mechanical and flexural properties of reinforced geopolymer concrete, Australian Journal of Structural Engineering, DOI: 10.1080/13287982.2022.2044613 [Google Scholar]
  15. Suresh Kumar, A. 2022. “Utilisation of Waste Glass Powder to Improve the Performance of Hazardous Incinerated Biomedical Waste Ash Geopolymer Concrete.” Innovative Infrastructure Solutions 7(1): 93. doi:10.1007/s41062-021-00694-8. [CrossRef] [Google Scholar]
  16. A. Islam, U.J. Alengaram, M.Z. Jumaat, and I.I. Bashar, The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar, Materials and Design, 56 (2014), 833–841. [CrossRef] [Google Scholar]
  17. A. Mehta and R. Siddique, Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: Strength and permeability properties, Journal of Cleaner Production, 205 (2018), 49–57. [CrossRef] [Google Scholar]
  18. Shi, Caijun & Meyer, Christian & Behnood, Ali, 2008. “Utilization of copper slag in cement and concrete,” Resources, Conservation & Recycling, Elsevier, vol. 52(10), pages 1115-1120. [CrossRef] [Google Scholar]
  19. Wei Wu, Weide Zhang, Guowei Ma (2010), “Mechanical properties of copper slag reinforced concrete under dynamic compression” Construction and Building Materials Volume 24, Issue 6, June 2010, Pages 910-917. [CrossRef] [Google Scholar]
  20. Mostafa Khanzadi, Ali Behnood (2009) “Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate” Construction and Building Materials Volume 23, Issue 6, June 2009, Pages 2183-2188. [CrossRef] [Google Scholar]
  21. Khalifa S. Al-Jabri ,Makoto Hisada ,Salem K. Al-Oraimi, Abdullah H. Al-Saidy (2009) “Copper slag as sand replacement for high performance concrete” Cement and Concrete Composites volume 31,issue number 7, AUG 2009. [Google Scholar]
  22. Khalifa S. Al-Jabri, Abdullah H. Al-Saidy, Ramzi Taha (2011) “Effect of copper slag as a fine aggregate on the properties of cement mortars and concrete” Construction and Building Materials Volume 25, Issue 2, February 2011, Pages 933-938. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.