EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 559 (2024) E3S Web of Conf., 559 (2024) 04043 References
Open Access
Issue
E3S Web of Conf.
Volume 559, 2024
2024 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2024)
Article Number 04043
Number of page(s) 15
Section Structural Engineering & Concrete Technology
DOI https://doi.org/10.1051/e3sconf/202455904043
Published online 08 August 2024
  1. N. Gamage, Y. Patrisia, C. Gunasekara, D.W. Law, S. Houshyar, S. Setunge, Shrinkage induced crack control of concrete integrating synthetic textile and natural cellulosic fibres: Comparative review analysis, Constr Build Mater 427 (2024). https://doi.org/10.1016/j.conbuildmat.2024.136275. [CrossRef] [Google Scholar]
  2. J. Frohnmüller, W. Seim, Bond strength, failure criteria and calculation methods for adhesively bonded timber–concrete composites, Constr Build Mater 423 (2024). https://doi.org/10.1016/j.conbuildmat.2024.135651. [Google Scholar]
  3. L. Joseph, P.S. Kumar, B.D.S. Deeraj, K. Joseph, K. Jayanarayanan, K.M. Mini, Modification of epoxy binder with multi walled carbon nanotubes in hybrid fiber systems used for retrofitting of concrete structures: evaluation of strength characteristics, Heliyon 8 (2022). https://doi.org/10.1016/j.heliyon.2022.e09609. [Google Scholar]
  4. A. He, J. Cai, Q.J. Chen, X. Liu, P. Huang, X.L. Tang, Seismic behaviour of steeljacket retrofitted reinforced concrete columns with recycled aggregate concrete, Constr Build Mater 158 (2018) 624–639. https://doi.org/10.1016/j.conbuildmat.2017.10.053. [CrossRef] [Google Scholar]
  5. H.M.C.C. Somarathna, S.N. Raman, D. Mohotti, A.A. Mutalib, K.H. Badri, Behaviour of concrete specimens retrofitted with bio-based polyurethane coatings under dynamic loads, Constr Build Mater 270 (2021). https://doi.org/10.1016/j.conbuildmat.2020.121860. [Google Scholar]
  6. M.E. Arslan, E. Celebi, An experimental study on cyclic behavior of aerated concrete block masonry walls retrofitted with different methods, Constr Build Mater 200 (2019) 226–239. https://doi.org/10.1016/j.conbuildmat.2018.12.132. [CrossRef] [Google Scholar]
  7. J.P. Zachariah, P.P. Sarkar, D. Nandi, A study on the properties of cement grouted open-graded bituminous concrete with brick as aggregates, Constr Build Mater 256 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119436. [CrossRef] [Google Scholar]
  8. H. Ye, Y. Lu, Rebar-concrete bond behaviour in grouted sleeve connectors, Constr Build Mater 431 (2024) 136487. https://doi.org/10.1016/j.conbuildmat.2024.136487. [CrossRef] [Google Scholar]
  9. Y. hui Liu, P. Yang, T. Ku, S. wen Gao, Effect of different nanoparticles on the grouting performance of cement-based grouts in dynamic water condition, Constr Build Mater 248 (2020). https://doi.org/10.1016/j.conbuildmat.2020.118663. [Google Scholar]
  10. Y.K. Cho, S.M. Kim, Evaluation of grouting layer vibration of railway precast concrete slab track system, Constr Build Mater 193 (2018) 244–254. https://doi.org/10.1016/j.conbuildmat.2018.10.216. [CrossRef] [Google Scholar]
  11. F. Pacheco-Torgal, S. Jalali, Nanotechnology: Advantages and drawbacks in the field of construction and building materials, Constr Build Mater 25 (2011) 582–590. https://doi.org/10.1016/j.conbuildmat.2010.07.009. [CrossRef] [Google Scholar]
  12. A. Musale, A.M. Hunashyal, A.K. Roopa, The Effect of Carbon Black, MWCNT and Carbon Fiber on Flexural behavior of cement nano composites, in: E3S Web of Conferences, EDP Sciences, 2023. https://doi.org/10.1051/e3sconf/202340503022. [Google Scholar]
  13. A.K. Roopa, A.M. Hunashyal, A.Y. Patil, A. Kamadollishettar, B. Patil, M.E.M. Soudagar, K. Shahapurkar, T.M.Y. Khan, M.A. Kalam, Study on Interfacial Interaction of Cement-Based Nanocomposite by Molecular Dynamic Analysis and an RVE Approach, Advances in Civil Engineering 2023 (2023). https://doi.org/10.1155/2023/8404335. [CrossRef] [Google Scholar]
  14. M. Atiq Orakzai, Hybrid effect of nano-alumina and nano-titanium dioxide on Mechanical properties of concrete, Case Studies in Construction Materials 14 (2021). https://doi.org/10.1016/j.cscm.2020.e00483. [CrossRef] [Google Scholar]
  15. A. Pietrzak, J. Adamus, B. Langier, Application of titanium dioxide in cement and concrete technology, in: Key Eng Mater, Trans Tech Publications Ltd, 2016: pp. 243–249. https://doi.org/10.4028/www.scientific.net/KEM.687.243. [Google Scholar]
  16. K. Chandramouli, J. Sree, N. Chaitanya, G. Hymavathi, A. Medha, A.A.S. Reddy, PERFORMANCE OF CONCRETE BY USING TITANIUMDIOXIDE, 2022. www.ijrpr.com. [Google Scholar]
  17. Q. Chen, R. Ma, H. Li, Z. Jiang, H. Zhu, Z. Yan, Effect of chloride attack on the bonded concrete system repaired by UHPC, Constr Build Mater 272 (2021). https://doi.org/10.1016/j.conbuildmat.2020.121971. [Google Scholar]
  18. V. Hlavička, L.E. Hlavicka-Laczák, É. Lublóy, Residual fracture mechanical properties of quartz and expanded clay aggregate concrete subjected to elevated temperature, Constr Build Mater 328 (2022). https://doi.org/10.1016/j.conbuildmat.2022.126845. [Google Scholar]
  19. M. Jalal, Z. Grasley, C. Gurganus, J.W. Bullard, Experimental investigation and comparative machine-learning prediction of strength behavior of optimized recycled rubber concrete, Constr Build Mater 256 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119478. [CrossRef] [Google Scholar]
  20. J. Zhao, K. Ni, Y. Su, Y. Shi, An evaluation of iron ore tailings characteristics and iron ore tailings concrete properties, Constr Build Mater 286 (2021). https://doi.org/10.1016/j.conbuildmat.2021.122968. [Google Scholar]
  21. H. Dikkar, V. Kapre, A. Diwan, S.K. Sekar, ScienceDirect Titanium Dioxide as a photocatalyst to create self-cleaning concrete, 2020. https://www.sciencedirect.com/science/article/pii/S2214785320386193. [Google Scholar]
  22. Roopa, A. K., Hunashyal, A. M., Gudagi, F. A., & Mulla, M. F. Piezo-resistive Properties of Polymer based cement nano composites. In E3S Web of Conferences (Vol. 455, p. 03013). EDP Sciences. (2023). https://doi.org/10.1051/e3sconf/202345503013 [CrossRef] [EDP Sciences] [Google Scholar]
  23. F. Dorado, L. Toledo, A.R. de la Osa, A. Esteban-Arranz, J. Sacristan, B. Pellegrin, J. Steck, L. Sanchez-Silva, Adhesion enhancement and protection of concrete against aggressive environment using graphite-Fe2O3 modified epoxy coating, Constr Build Mater 379 (2023). https://doi.org/10.1016/j.conbuildmat.2023.131179. [CrossRef] [Google Scholar]
  24. Ł. Sadowski, Ł. Kampa, A. Chowaniec, A. Królicka, A. Żak, H. Abdoulpour, S. Vantadori, Enhanced adhesive performance of epoxy resin coating by a novel bonding agent, Constr Build Mater 301 (2021). https://doi.org/10.1016/j.conbuildmat.2021.124078. [CrossRef] [Google Scholar]
  25. L. Peng, Y. Zhao, H. Zhang, Flexural behavior and durability properties of recycled aggregate concrete (RAC) beams subjected to long-term loading and chloride attacks, Constr Build Mater 277 (2021). https://doi.org/10.1016/j.conbuildmat.2021.122277. [CrossRef] [Google Scholar]
  26. G. Zhao, J. Li, M. Shi, J. Cui, F. Xie, Degradation of cast-in-situ concrete subjected to sulphate-chloride combined attack, Constr Build Mater 241 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117995. [Google Scholar]
  27. M. Abolfazli, R. Ivan John Reyes, D. Choong, M. Bazli, A. Rajabipour, H. Pourasiabi, M. Arashpour, Bond behaviour between CFRP, GFRP, and hybrid C-GFRP tubes and seawater sea sand concrete after exposure to elevated temperatures, Constr Build Mater 392 (2023). https://doi.org/10.1016/j.conbuildmat.2023.131884. [CrossRef] [Google Scholar]
  28. J. Shen, Q. Xu, M. Liu, Statistical analysis of defects within concrete under elevated temperatures based on SEM image, Constr Build Mater 293 (2021). https://doi.org/10.1016/j.conbuildmat.2021.123503. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.