Open Access
| Issue |
E3S Web Conf.
Volume 561, 2024
The 8th International Conference on Energy, Environment and Materials Science (EEMS 2024)
|
|
|---|---|---|
| Article Number | 03015 | |
| Number of page(s) | 4 | |
| Section | Advanced Materials Application and Their Characteristics Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202456103015 | |
| Published online | 09 August 2024 | |
- Hu W., Huang Y., Hou C., et al. Design and thermal performance evaluation of a new solar air collector with comprehensive consideration of five factors of phase-change materials and copper foam combination. Applied Energy. 2023; (344) 121268. [CrossRef] [Google Scholar]
- Hu W., Huang Y., Xiao S., et al. Design and adaptability analysis of filling rate of a self-insulation wall considering thermal performance, benefit-cost, and cold-winter and hot-summer climate. Case Studies in Construction Materials. 2024; (20) e03256. [Google Scholar]
- Yang S., et al. Model predictive control with adaptive machine-learning-based model for building energy efficiency and comfort optimization. Applied Energy. 2020; (271) 115147. [CrossRef] [Google Scholar]
- Zhu L., et al. Multi-objective optimization for energy consumption, daylighting and thermal comfort performance of rural tourism buildings in north China. Building and Environment, 2020, (176) 106841. [Google Scholar]
- Nickolaevich A., Hou C., et al. Design and thermal performance evaluation of the thermal storage layer of a solar air collector with comprehensive consideration of six factors of phase-change materials. Journal of Energy Storage. 2024; 90 (15) 111888. [CrossRef] [Google Scholar]
- Ma G., Lin J., Li N., et al. Cross-cultural assessment of the effectiveness of eco-feedback in building energy conservation. Energy and Buildings. 2017, (134):329ȓ338. [CrossRef] [Google Scholar]
- Hu W., Xia Y., Li F., et al. Effect of the filling position and filling rate of the insulation material on the insulation performance of the hollow block. Case Studies in Thermal Engineering. 2021; 26 (6) 101023. [CrossRef] [Google Scholar]
- Liu Z., Hou J., Chen Y., et al. Effectiveness assessment of different kinds/configurations of phasechange materials (PCM) for improving the thermal performance of lightweight building walls in summer and winter. Renewable Energy. 2023; (2002): 721-735. [Google Scholar]
- Allam B., Nehari T. Numerical analysis for energy performance optimization of hollow bricks for roofing. Case study: Hot climate of Algeria. Construction and Building Materials. 2023; (367) 130336. [Google Scholar]
- Gao Y., Meng X., et al. Thermal behavior analysis of hollow bricks filled with phase-change material (PCM). Journal of Building Engineering. 2020; (31) 101447. [CrossRef] [Google Scholar]
- Shu Z., Jia H., Chang S., et al. Recent progress in application of composite phase change materials with nanoparticles matrix for energy savings of buildings. Chemical Industry and Engineering Progress, 2021, 40(S2): 265-278. [Google Scholar]
- Xue G., Wang C., Zhu Q. Research progress on preparation and application of microcapsule phase change materials. Chemical Industry and Engineering Progress. 2021; 40(10): 5554–5576. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.