EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 563 (2024) E3S Web Conf., 563 (2024) 02013 References
Open Access
Issue
E3S Web Conf.
Volume 563, 2024
International Conference on Environmental Science, Technology and Engineering (ICESTE 2024)
Article Number 02013
Number of page(s) 6
Section Civil Engineering
DOI https://doi.org/10.1051/e3sconf/202456302013
Published online 30 August 2024
  1. A. Zaki et al., Evaluating Pre-Corrosion and Post-Corrosion of Oil Palm Shell Concrete with Non-Destructive Testing Key Engineering Materials 942, 137–162 (2023) [CrossRef] [Google Scholar]
  2. Indonesia Palm Oil Statistics, Central Bureau of Statistics (Indonesia): Jakarta (2020) [Google Scholar]
  3. S. Sangkham, Face mask and medical waste disposal during the novel COVID-19 pandemic in Asia. Case Studies in Chemical and Environmental Engineering 2, 100052 (2020) [CrossRef] [Google Scholar]
  4. H. Rahayu et al., The effect of different acceleration corrosion processes on flexural strength of oil palm shell concrete. AIP Conference Proceedings 2482(1) (2023) [Google Scholar]
  5. C.A. Wibisono et al., The effect of partial aggregate replacement on the flexural strength of corroded oil palm shell concrete. AIP Conference Proceedings 2689(1) (2023) [Google Scholar]
  6. A. Zaki et al., Mechanical Behavior of Corroded Steel in Lightweight Concrete: A Review. IOP Conference Series Earth and Environmental Science 832(1), 012015 (2021) [CrossRef] [Google Scholar]
  7. A. Hidayat, A. Ariyanto, Strength Improvement Through the Addition of Palm Shells in Structural Lightweight Concrete as Coarse Aggregate. Aptek 25–30 (2020) [Google Scholar]
  8. A.U. Berli, Determination of compressive strength of K-225 lightweight concrete with palm kernel shell substitution using Portland cement type 1. Menara Ilmu 13(6) (2019) [Google Scholar]
  9. M.M. Khan, G.L. Wei, T.J. Deepak, N.B. Sudesh, Use of oil palm shell as replacement of coarse aggregate for investigating properties of concrete. Int J Applied Engineering Research 11(4) 2379–2383 (2016) [Google Scholar]
  10. B.P. Seputro, Effect of different concrete curing on concrete strength. J-Innovation, 7(2) 31–35 (2018) [Google Scholar]
  11. M.M. Adi, S.S. Sofyan, Y.Y. Hajar, Effect of Flexural Strength of Concrete with the Addition of Empty Palm Bunch Fibre TERAS JURNAL: Jurnal Teknik Sipil 8(2), 426–433 (2019) [CrossRef] [Google Scholar]
  12. S. Kilmartin-Lynch, M. Saberian, J. Li, R. Roychand, G. Zhang, Preliminary evaluation of the feasibility of using polypropylene fibres from COVID-19 single-use face masks to improve the mechanical properties of concrete. Journal of Cleaner Production 296, 126460 (2021) [CrossRef] [PubMed] [Google Scholar]
  13. SNI 8321:2016 Concrete aggregate specification, National Standardization Agency of Indonesia: Jakarta (2016) [Google Scholar]
  14. SNI ASTM C136: 2012: Test method for sieve analysis of fine aggregate and coarse aggregate, National Standardization Agency of Indonesia: Jakarta (2012) [Google Scholar]
  15. SNI 03-2834-2000: Procedure for Preparation of Normal Concrete Mix Plan., National Standardization Agency of Indonesia: Jakarta (2000) [Google Scholar]
  16. Z. Arkis, Effect of concrete treatment method on the compressive strength of normal concrete. Jurnal Teknik Sipil Institut Teknologi Padang 7(2), 5 (2020) [Google Scholar]
  17. D. Nurtanto, A.A. Rahayu, W.T. Wahyuningtyas Effect of Seawater and Freshwater Curing on the Compressive Strength of Self-Solidifying Geopolymer Concrete. Rekayasa 14(1), 32–38 (2021) [CrossRef] [Google Scholar]
  18. H. Prayuda, B.C. Zega, B. Afriandini, Concrete compressive strength and absorption values with varying seawater and river water immersion treatments. Semesta Teknika 22(2) 112–122 (2019) [Google Scholar]
  19. S. Suhaimi, Effect of water chemistry on concrete compressive strength. TERAS JURNAL: Jurnal Teknik Sipil 10(1), 81–88 (2020) [CrossRef] [Google Scholar]
  20. H. Deviyanti, Experimental study on the use of limestone as an additive in normal concrete mixes. in Prosiding SoBAT (Seminar Sosial Politik, Bisnis, Akuntansi dan Teknik) Universitas Sangga Buana YPKP. Universitas Sangga Buana YPKP (2019) [Google Scholar]
  21. R. Sidjabat, R. Ginting, D. Sihombing, Testing the Quality of Concrete Using Various Stirring Methods. JURNAL ILMIAH TEKNIK SIPIL 9(2), 116–124 (2020) [Google Scholar]
  22. A. Wulandari, F. Frieda, The effect of variations in water-cement ratio and cement content on mortar compressive strength and concrete compressive strength using Kahayan River Sand in Palangka Raya City. Jurnal Kacapuri: Jurnal Keilmuan Teknik Sipil 4(2), 80–94 (2022) [CrossRef] [Google Scholar]
  23. R. Ririn, L. Sulaiman, M.R. Adriansyah, Study of the Addition of Polypropylene Fibre Contained in Medical Masks to the Compressive Strength of Mortar. in Seminar Nasional Hasil Penelitian & Pengabdian Kepada Masyarakat (SNP2M) (2021) [Google Scholar]
  24. N.R. Setiati, Study on the addition of synthetic fibre in concrete mixtures on the mechanical properties of concrete. Jurnal Permukiman 11(1), 1–16 (2016) [CrossRef] [Google Scholar]
  25. C.S. Sondakh, H. Manalip, S. Wallah, Effect of curing conditions on strength and microstructure of selfcompacting concrete with high fly ash volume. Jurnal Ilmiah Media Engineering 6(3) (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.