Open Access
Issue
E3S Web Conf.
Volume 564, 2024
International Conference on Power Generation and Renewable Energy Sources (ICPGRES-2024)
Article Number 02011
Number of page(s) 7
Section Electric Vehicles and Drives
DOI https://doi.org/10.1051/e3sconf/202456402011
Published online 06 September 2024
  1. Emadi, Ali, Kaushik Rajashekara, Sheldon S. Williamson, and Srdjan M. Lukic. “Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations.” IEEE Transactions on vehicular technology 54, no. 3 (2005): 763-770. [CrossRef] [Google Scholar]
  2. Salman, Mutasim, Niels J. Schouten, and Naim A. Kheir. “Control strategies for parallel hybrid vehicles.” In Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No. 00CH36334), vol. 1, no. 6, pp. 524-528. IEEE, 2000. [Google Scholar]
  3. Kheir, Naim A., Mutasim A. Salman, and Niels J. Schouten. “Emissions and fuel economy trade-off for hybrid vehicles using fuzzy logic.” Mathematics and computers in simulation 66, no. 2-3 (2004): 155-172. [CrossRef] [Google Scholar]
  4. Sharma, A., Chaturvedi, R., Saraswat, M., & Kalra, R. (2022). Weld reliability characteristics of AISI 304L steels welded with MPAW (Micro Plasma Arc Welding). Materials Today: Proceedings, 60, 1966-1972. [Google Scholar]
  5. Badhoutiya, Arti, Subhash Chandra, and Sachin Goyal. “Identification of suitable modulation scheme for boosted output in ZSI.” In 2020 4th International Conference on Electronics, Communication and Aerospace Technology (ICECA), pp. 238-243. IEEE, 2020. [Google Scholar]
  6. Kumar, Yogendra, Mukesh Pushkarna, and Gaurav Gupta. “Microgrid implementation in unbalanced nature of feeder using conventional technique.” In 2020 3rd international conference on intelligent sustainable systems (ICISS), pp. 1489-1494. IEEE, 2020. [Google Scholar]
  7. Mausam, K., Sharma, A., & Singh, P. K. (2021). Calculating stress, temperature in brake pad using ANSYS composite materials. Materials Today: Proceedings, 45, 3547-3550. [Google Scholar]
  8. Serrao, Lorenzo, Simona Onori, and Giorgio Rizzoni. “A comparative analysis of energy management strategies for hybrid electric vehicles.” Journal of Dynamic Systems, Measurement, and Control 133, no. 3 (2011). [CrossRef] [Google Scholar]
  9. Sharma, A., Chaturvedi, R., Singh, P. K., & Sharma, K. (2021). AristoTM robot welding performance and analysis of mechanical and microstructural characteristics of the weld. Materials Today: Proceedings, 43, 614-622. [Google Scholar]
  10. Zhao, Yang, Yanguang Cai, and Qiwen Song. “Energy control of plug-in hybrid electric vehicles using model predictive control with route preview.” IEEE/CAA Journal of Automatica Sinica (2018). [Google Scholar]
  11. Beck, R., F. Richert, A. Bollig, D. Abel, S. Saenger, K. Neil, T. Scholt, and K-E. Noreikat. “Model predictive control of a parallel hybrid vehicle drivetrain.” Proceedings of the 44th IEEE Conference on Decision and Control, pp. 2670-2675. IEEE, 2005. [Google Scholar]
  12. Sharma, T., Singh, S., Sharma, S., Sharma, A., Shukla, A. K., Li, C., … & Eldin, E. M. T. (2022). Studies on the Utilization of Marble Dust, Bagasse Ash, and Paddy Straw Wastes to Improve the Mechanical Characteristics of Unfired Soil Blocks. Sustainability, 14(21), 14522. [CrossRef] [Google Scholar]
  13. Koot, Michiel, John TBA Kessels, Bram De Jager, W. P. M. H. Heemels, P. P. J. Van den Bosch, and Maarten Steinbuch. “Energy management strategies for vehicular electric power systems.” IEEE transactions on vehicular technology 54, no. 3 (2005): 771-782. [CrossRef] [Google Scholar]
  14. Islam, A., Sharma, S., Sharma, K., Sharma, R., Sharma, A., & Roy, D. (2020). Real-time data monitoring through sensors in robotized shielded metal arc welding. Materials Today: Proceedings, 26, 2368-2373. [Google Scholar]
  15. Pragathi, B., and P. Ramu. “Authentication Technique for Safeguarding Privacy in Smart Grid Settings.” E3S Web of Conferences. Vol. 540. EDP Sciences, 2024. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.