Open Access
Issue |
E3S Web Conf.
Volume 564, 2024
International Conference on Power Generation and Renewable Energy Sources (ICPGRES-2024)
|
|
---|---|---|
Article Number | 10003 | |
Number of page(s) | 12 | |
Section | Power Quality | |
DOI | https://doi.org/10.1051/e3sconf/202456410003 | |
Published online | 06 September 2024 |
- Othman, A. M. (2011). Enhancing the performance of flexible AC transmission systems (FACTS) by computational intelligence. [Google Scholar]
- Muneer, O. (2015). Design and Control of FACTS-based high Performance Microgrid (Doctoral dissertation). [Google Scholar]
- Islam, A., Sharma, A., Chaturvedi, R., & Singh, P. K. (2021). Synthesis and structural analysis of zinc oxide nano particle by chemical method. Materials Today: Proceedings, 45, 3670-3673. [CrossRef] [Google Scholar]
- Ioannou, S., Argyrou, M. C., Christodoulides, P., Raspopoulos, M., Darwish, M., & Marouchos, C. C. (2021, October). Modulation Processes and Mathematical Models of the TCR. In 2021 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) (pp. 1-5). IEEE. [Google Scholar]
- Nakka, S., Brinda, R., & Sairama, T. (2023). Design and simulation of monarch butterfly optimized SP-UPFC for power quality compensation. Computers and Electrical Engineering, 110, 108800. [CrossRef] [Google Scholar]
- Sharma, A., Yadav, R., & Sharma, K. (2021). Optimization and investigation of automotive wheel rim for efficient performance of vehicle. Materials Today: Proceedings, 45, 3601-3604. [CrossRef] [Google Scholar]
- Asija, D., Viral, R., Choudekar, P., Bakhsh, F. I., & Ahmad, A. (2023). Transmission network congestion control by DESS through interval computation and capacity optimization via hybrid DE‐PSO technique. IET Generation, Transmission & Distribution, 17(3), 551-572. [CrossRef] [Google Scholar]
- Abdelmohsen, A. M., Hebala, O. M., & Hamad, M. S. (2023, February). Comparative Study of SVC and STATCOM Performance on Reactive Power Compensation in Hot Strip Mill. In 2023 IEEE Conference on Power Electronics and Renewable Energy (CPERE) (pp. 1-7). IEEE. [Google Scholar]
- Poompavai, T., & Kowsalya, M. (2019). Control and energy management strategies applied for solar photovoltaic and wind energy fed water pumping system: A review. Renewable and sustainable energy reviews, 107, 108-122. [CrossRef] [Google Scholar]
- Sharma, A., Islam, A., Sharma, K., & Singh, P. K. (2021). Optimization techniques to optimize the milling operation with different parameters for composite of AA 3105. Materials Today: Proceedings, 43, 224-230. [CrossRef] [Google Scholar]
- Khare, V., Nema, S., & Baredar, P. (2013). Status of solar wind renewable energy in India. Renewable and Sustainable Energy Reviews, 27, 1-10. [CrossRef] [Google Scholar]
- Gao, X., Liu, J., Zhang, J., Yan, J., Bao, S., Xu, H., & Qin, T. (2013). Feasibility evaluation of solar photovoltaic pumping irrigation system based on analysis of dynamic variation of groundwater table. Applied energy, 105, 182-193. [CrossRef] [Google Scholar]
- López-Luque, R., Reca, J., & Martínez, J. (2015). Optimal design of a standalone direct pumping photovoltaic system for deficit irrigation of olive orchards. Applied Energy, 149, 13-23. [CrossRef] [Google Scholar]
- Sharma, A., Chaturvedi, R., Saraswat, M., & Kalra, R. (2022). Weld reliability characteristics of AISI 304L steels welded with MPAW (Micro Plasma Arc Welding). Materials Today: Proceedings, 60, 1966-1972. [CrossRef] [Google Scholar]
- Bakelli, Y., Arab, A. H., & Azoui, B. (2011). Optimal sizing of photovoltaic pumping system with water tank storage using LPSP concept. Solar energy, 85(2), 288-294. [CrossRef] [Google Scholar]
- Gucci, R. I. C. C. A. R. D. O., Lodolini, E. M., & Rapoport, H. F. (2007). Productivity of olive trees with different water status and crop load. The Journal of Horticultural Science and Biotechnology, 82(4), 648-656. [CrossRef] [Google Scholar]
- Sharma, A., Chaturvedi, R., Singh, P. K., & Sharma, K. (2021). AristoTM robot welding performance and analysis of mechanical and microstructural characteristics of the weld. Materials Today: Proceedings, 43, 614-622. [CrossRef] [Google Scholar]
- Islam, A., Sharma, S., Sharma, K., Sharma, R., Sharma, A., & Roy, D. (2020). Real-time data monitoring through sensors in robotized shielded metal arc welding. Materials Today: Proceedings, 26, 2368-2373. [CrossRef] [Google Scholar]
- Villalobos, F. J., Orgaz, F., Testi, L., & Fereres, E. (2000). Measurement and modeling of evapotranspiration of olive (Olea europaea L.) orchards. European Journal of Agronomy, 13(2-3), 155-163. [Google Scholar]
- Pragathi, B., and P. Ramu. “Authentication Technique for Safeguarding Privacy in Smart Grid Settings.” E3S Web of Conferences. Vol. 540. EDP Sciences, 2024. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.