Open Access
| Issue |
E3S Web Conf.
Volume 564, 2024
International Conference on Power Generation and Renewable Energy Sources (ICPGRES-2024)
|
|
|---|---|---|
| Article Number | 11019 | |
| Number of page(s) | 10 | |
| Section | Power Engineering and Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202456411019 | |
| Published online | 06 September 2024 | |
- K. Balamurugan and D. Srinivasan, “Review of power flow studies on distribution network with distributed generation,” in IEEE Ninth International Conference on Power Electronics and Drive Systems (PEDS), 2011, pp. 411-417. [Google Scholar]
- R. E. Brown, “Impact of smart grid on distribution system design,” in IEEE Power and Energy Society General Meeting-Conversion and Delivery of Electrical Energy in the 21st Century, 2008, pp. 1-4. [Google Scholar]
- Hai, T., Alshahri, A. H., Mohammed, A. S., Sharma, A., Almujibah, H. R., Metwally, A. S. M., & Ullah, M. (2023). Performance assessment and multiobjective optimization of a biomass waste-fired gasification combined cycle for emission reduction. Chemosphere, 334, 138980. [CrossRef] [PubMed] [Google Scholar]
- Verma, S.K., Gupta, N.K. and Rakshit, D., 2020. A comprehensive analysis on advances in application of solar collectors considering design, process and working fluid parameters for solar to thermal conversion. Solar Energy, 208, pp.1114-1150. [CrossRef] [Google Scholar]
- Y. Kumar, M. Pushkarna and G. Gupta, “Microgrid Implementation in Unbalanced Nature of Feeder using Conventional Technique,” 2020 3rd International Conference on Intelligent Sustainable Systems (ICISS), 2020, pp. 1489-1494, doi: 10.1109/ICISS49785.2020.9316024. [Google Scholar]
- Sharma, A., Yadav, R., & Sharma, K. (2021). Optimization and investigation of automotive wheel rim for efficient performance of vehicle. Materials Today: Proceedings, 45, 3601-3604. [CrossRef] [Google Scholar]
- T.-H. Chen, M.-S. Chen, T. Inoue, P. Kotas, and E. A. Chebli, “Three- phase cogenerator and transformer models for distribution system analysis,” IEEE Transactions on Power Delivery, vol. 6, pp. 1671-1681, 1991. [CrossRef] [Google Scholar]
- Sharma, A., Islam, A., Sharma, K., & Singh, P. K. (2021). Optimization techniques to optimize the milling operation with different parameters for composite of AA 3105. Materials Today: Proceedings, 43, 224-230. [CrossRef] [Google Scholar]
- S. Khushalani, J. M. Solanki, and N. N. Schulz, “Development of three- phase unbalanced power flow using PV and PQ models for distributed generation and study of the impact of DG models,” IEEE Transactions on Power Systems, vol. 22, pp. 1019- 1025, 2007. [CrossRef] [Google Scholar]
- S. Moghaddas-Tafreshi and E. Mashhour, “Distributed generation modeling for power flow studies and a three-phase unbalanced power flow solution for radial distribution systems considering distributed generation,” Electric Power Systems Research, vol. 79, pp. 680-686, 2009. [CrossRef] [Google Scholar]
- Sharma, A., Chaturvedi, R., & Singh, P. K. (2022). Efficient activated metal inert gas welding procedures by various fluxes for welding process. In Computational and Experimental Methods in Mechanical Engineering: Proceedings of ICCEMME 2021 (pp. 419-427). Springer Singapore. [Google Scholar]
- J.-H. Teng, “Modelling distributed generations in three-phase distribution load flow,” IET generation, transmission & distribution, vol. 2, pp. 330-340, 2008. [CrossRef] [Google Scholar]
- Chaturvedi, R., & Sharma, A. (2023, July). Impact of process parameters on dissimilar welding of metal joining: Using DOE. In AIP Conference Proceedings (Vol. 2721, No. 1). AIP Publishing. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.