EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 619 (2025) E3S Web Conf., 619 (2025) 03006 References
Open Access
Issue
E3S Web Conf.
Volume 619, 2025
3rd International Conference on Sustainable Green Energy Technologies (ICSGET 2025)
Article Number 03006
Number of page(s) 18
Section Smart Electronics for Sustainable Solutions
DOI https://doi.org/10.1051/e3sconf/202561903006
Published online 12 March 2025
  1. Menezes P L et al 2013 Self-Lubricating Behavior of Graphite-Reinforced Composites, in Tribology for Scientists and Engineers: From Basics to Advanced Concepts ed P L Menezes et al (Berlin: Springer) pp 341–89 [CrossRef] [Google Scholar]
  2. Singh J 2016 Fabrication characteristics and tribological behavior of Al/SiC/Gr hybrid aluminum matrix composites: a review Friction 191–207 [Google Scholar]
  3. Srivastava A et al 2014 A review on fabrication & characterization of hybrid aluminium metal matrix composite Int. J. Adv. Res. and Innovation 2 242–6 [Google Scholar]
  4. Sharma P, Khanduja D and Sharma S 2014 Tribological and mechanical behavior of particulate aluminum matrix composites J. Reinf. Plast. Compos. 33 2192–202 [CrossRef] [Google Scholar]
  5. Miracle D B 2005 Metal matrix composites–from science to technological significance Compos. Sci. Technol. 65 2526–40 [CrossRef] [Google Scholar]
  6. Fentahun M A and Sava M A 2018 Materials used in automotive manufacture and material selection using ashby charts Int. J. Mater. Eng. 8 40–54 [Google Scholar]
  7. Arun K S, Panneerselvam T and Raghuraman S 2015 Study on mechanical properties of aluminium based metal matrix composites by hybrid reinforcement Appl. Mech. Mater. 813-814 116–20 [CrossRef] [Google Scholar]
  8. Chand S et al 2021 Influence of dispersoid content on compressibility, sinterability and mechanical behaviour of B4C/BN reinforced Al6061 metal matrix hybrid composites fabricated via mechanical alloying Met. Mater. Int. 27 4841–53 [CrossRef] [Google Scholar]
  9. Allison J E and Cole G S 1993 Metal-matrix composites in the automotive industry: opportunities and challenges JOM 45 19–24 [CrossRef] [Google Scholar]
  10. Chandel R, Sharma N and Bansal S A 2021 A review on recent developments of aluminum-based hybrid composites for automotive applications Emergent Materials 4 1243–57 [CrossRef] [Google Scholar]
  11. Ghassemieh E 2011 Materials in Automotive Application, State of the Art and Prospects (University of Sheffield, England: IntechOpen) [Google Scholar]
  12. Hariharan, Shanmugasundaram, D. Anandan, Murugaperumal Krishnamoorthy, Vinay Kukreja, Nitin Goyal, and Shih-Yu Chen. “Advancements in Liver Tumor Detection: A Comprehensive Review of Various Deep Learning Models.” CMES-Computer Modeling in Engineering & Sciences 142, no. 1 (2025). [Google Scholar]
  13. Boyer R R et al 2015 Materials considerations for aerospace applications MRS Bull. 40 1055–66 [Google Scholar]
  14. Ashebir D A, Mengesha G A and Sinha D K 2022 An insight into mechanical and metallurgical behavior of hybrid reinforced aluminum metal matrix composite Adv. Mater. Sci. Eng. 2022 7843981 [CrossRef] [Google Scholar]
  15. Ashebir D A, Mengesha G A and Sinha D K 2022 The role of tetra hybrid reinforcements on the behavior of aluminum metal matrix composites J. Nanomater. 2022 1988293 [CrossRef] [Google Scholar]
  16. Bodunrin M O, Alaneme K K and Chown L H 2015 Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics J. Mater. Res. Technol. 4 434–45 [CrossRef] [Google Scholar]
  17. Jailani H S et al 2009 Multi-response optimisation of sintering parameters of Al–Si alloy/fly ash composite using Taguchi method and grey relational analysis The Int. J. Adv. Manuf. Technol. 45 362 [CrossRef] [Google Scholar]
  18. Elango M and K A 2019 Study on microstructure and EDAX analysis of Al/SiC/Gr hybrid metal matrix composites J. Surf. Sci. Technol. [Google Scholar]
  19. Manohar G, Pandey K M and Maity S R 2021 Effect of microwave sintering on the microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nano composite fabricated by powder metallurgy techniques Ceram. Int. 47 32610–18 [CrossRef] [Google Scholar]
  20. Stojanović B et al 2018 Experimental optimisation of the tribological behaviour of Al/SiC/Gr hybrid composites based on Taguchi’s method and artificial neural network J. Brazilian Soc. Mech. Sci. Eng. 40 311 [CrossRef] [Google Scholar]
  21. Singh J and Chauhan A 2014 A review on sliding wear behaviour of aluminium matrix composites with hybrid reinforcements for automotive applications Tribology Online 9 121–34 [CrossRef] [Google Scholar]
  22. Arora G and Sharma S 2017 A review on monolithic and hybrid metal–matrix composites reinforced with industrial-agro wastes J Brazilian Soc. Mech. Sci. Eng. 39 4819–35 [CrossRef] [Google Scholar]
  23. Kulkarni P P, Siddeswarappa B and Kumar K S H 2019 A survey on effect of agro waste ash as reinforcement on aluminium base metal matrix composites Open J. Compos. Mater. 9 312–26 [Google Scholar]
  24. Ikubanni P P et al 2021 Optimization of the tribological properties of hybrid reinforced aluminium matrix composites using Taguchi and Grey’s relational analysis Sci. African 12 e00839 [Google Scholar]
  25. Kumar C R et al 2021 Process optimization using grey relational analysis in dry sliding wear behavior on SiC/B4C/Talc reinforced Al 6061 hybrid metal matrix composite Metall. Res. Technol. 118 614 [CrossRef] [EDP Sciences] [Google Scholar]
  26. Daniel S A A et al 2019 Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi-grey relational analysis Defence Technol. 15 545–56 [CrossRef] [Google Scholar]
  27. Ramadoss N et al 2021 Effect of SiC and MoS2 co-reinforcement on enhancing the tribological and anti-corrosive performance of aluminum matrix (Al6063-T6) nanocomposites Silicon 14 5471–79 [Google Scholar]
  28. Singh K M and Chauhan A K 2021 Fabrication, characterization, and impact of heat treatment on sliding wear behaviour of aluminium metal matrix composites reinforced with B4C Adv. Mater. Sci. Eng. 2021 5554837 [CrossRef] [Google Scholar]
  29. Liu Y B et al 1994 Recent development in the fabrication of metal matrix-particulate composites using powder metallurgy techniques J. Mater. Sci. 29 1999–2007 [CrossRef] [Google Scholar]
  30. Mussatto A et al 2021 Advanced production routes for metal matrix composites Eng. Rep. 3 e12330 [CrossRef] [Google Scholar]
  31. Agboola O O 2021 Optimization of the tribological properties of hybrid reinforced aluminium matrix composites using Taguchi and Grey’s relational analysis Sci. African 12 e00839 [Google Scholar]
  32. Haq A N, Marimuthu P and Jeyapaul R 2008 Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method Int. J. Adv. Manuf. Technol. 37 250–5 [CrossRef] [Google Scholar]
  33. Yunus M, Alsoufi M and Munshi S 2016 Taguchi-Grey relation analysis for assessing the optimal set of control factors of thermal barrier coatings for high-temperature applications Mech. Adv. Mater. Mod. Processes 2 4 [CrossRef] [Google Scholar]
  34. Kasman Ş 2013 Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754- H111 Int. J. Adv. Manuf. Technol. 68 795–804 [CrossRef] [Google Scholar]
  35. Pavlina E J and Vantyne C 2008 Correlation of yield strength and tensile strength with hardness forsteels J. Mater. Eng. Perform. 17 888–93 [CrossRef] [Google Scholar]
  36. Tiryakioğlu M et al 2015 Hardness–strength relationships in the aluminum alloy 7010 Mater. Sci. Eng. A 631 196–200 [CrossRef] [Google Scholar]
  37. Cahoon J R 1972 An improved equation relating hardness to ultimate strength Metall. Mater. Trans. B 3 3040–3040 [CrossRef] [Google Scholar]
  38. Pavlina E J and Van Tyne C J 2008 Correlation of yield strength and tensilestrength with hardness forsteels J. Mater. Eng. Perform. 17 888–93 [CrossRef] [Google Scholar]
  39. Annaz A A et al 2020 Comparative study of mechanical performance between Al– Graphite and Cu–Graphite self-lubricating composites reinforced by nano-Ag particles AIMS Mater. Sci. 7 534–51 [CrossRef] [Google Scholar]
  40. Achuthamenon Sylajakumari P, Ramakrishnasamy R and Palaniappan G 2018 Taguchi Grey relational analysis for multi-response optimization of wear in co-continuous composite Mater. 11 1743 [CrossRef] [Google Scholar]
  41. H S J et al 2009 Multi-response optimisation of sintering parameters of Al-Si alloy/fly ash composite using Taguchi method and grey relational analysis The Int. J. Adv. Manuf. Technol. 45 362–9 [CrossRef] [Google Scholar]
  42. Meignanamoorthy M et al 2022 Evaluation on powder metallurgy process parameters of ball-milled AA8079-B4C nanostructured composites via taguchi grey relational analysis J. Nanomater. 2022 7484053 [CrossRef] [Google Scholar]
  43. Poornesh M et al 2022 Multi-response modelling and optimisation of mechanical properties of Al-Si alloy using mixture design of experiment approach Processes 10 2246 [CrossRef] [Google Scholar]
  44. Julong D 1989 Introduction to grey system theory J. Grey System 1 1–24 [Google Scholar]
  45. Naqiuddin N H et al 2018 Numerical investigation for optimizing segmented micro- channel heat sink by Taguchi-Grey method Appl. Energy 222 437–50 [CrossRef] [Google Scholar]
  46. Acır A et al 2017 Parametric optimization of energy and exergy analyses of a novel solar air heater with grey relational analysis Appl. Therm. Eng. 122 330–8 [CrossRef] [Google Scholar]
  47. Ravindran P et al 2013 Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricant Ceram. Int. 39 1169–82 [CrossRef] [Google Scholar]
  48. Adediran A A et al 2021 Optimization studies of stir casting parameters and mechanical properties of TiO2 reinforced Al 7075 composite using response surface methodology Sci. Rep. 11 19860 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.