EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 619 (2025) E3S Web Conf., 619 (2025) 03008 References
Open Access
Issue
E3S Web Conf.
Volume 619, 2025
3rd International Conference on Sustainable Green Energy Technologies (ICSGET 2025)
Article Number 03008
Number of page(s) 17
Section Smart Electronics for Sustainable Solutions
DOI https://doi.org/10.1051/e3sconf/202561903008
Published online 12 March 2025
  1. S. Almahmoud, H. Jouhara, Experimental and theoretical investigation on a radiative flat heat pipe heat exchanger. Energy. 174, 972 (2019). [CrossRef] [Google Scholar]
  2. R. Girimurugan, P. Selvaraju, P. Jeevanandam, M. Vadivukarassi, S. Subhashini, N. Selvam, S. K. Ahammad, S. Mayakannan, S. K. Vaithilingam, Application of Deep Learning to the Prediction of Solar Irradiance through Missing Data. International Journal of Photoenergy. 2023, (2023). [CrossRef] [Google Scholar]
  3. Y. H. Diao, L. Liang, Y. M. Kang, Y. H. Zhao, Z. Y. Wang, T. T. Zhu, Experimental study on the heat recovery characteristic of a heat exchanger based on a flat micro- heat pipe array for the ventilation of residential buildings. Energy Build. 152, 448 (2017). [CrossRef] [Google Scholar]
  4. B. Karthikeyan, G. Praveen Kumar, R. Saravanan, Alberto Coronas, Ramadas Narayanan, R. Girimurugan, Solar powered cascade system for sustainable deep- freezing and power generation - exergoeconomic evaluation and multi-objective optimization for tropical regions. Thermal Science and Engineering Progress. 102552 (2024). [Google Scholar]
  5. L.-H. Chien, Y.-C. Shih, An experimental study of mesh type flat heat pipes. Journal of Mechanics. 27, 167 (2011). [CrossRef] [Google Scholar]
  6. Ganesan, Sakthivel, Prince Winston David, Pravin Murugesan, Praveen Kumar Balachandran. Solar photovoltaic system performance improvement using a new fault identification technique. Electric Power Components and Systems. 52, 42 (2024). [CrossRef] [Google Scholar]
  7. L. Yang, X. Ling, H. Peng, L. Duan, X. Chen, Starting characteristics of a novel high temperature flat heat pipe receiver in solar power tower plant based of ‘Flat- front’ Startup model. Energy. 183, 936 (2019). [CrossRef] [Google Scholar]
  8. V. Guichet, N. Khordehgah, H. Jouhara, Experimental investigation and analytical prediction of a multi-channel flat heat pipe thermal performance. International Journal of Thermofluids. 5, (2020). [Google Scholar]
  9. V. Guichet, B. Delpech, H. Jouhara, Experimental investigation, CFD and theoretical modeling of two-phase heat transfer in a three-leg multi-channel heat pipe. Int J Heat Mass Transf. 203, (2023). [Google Scholar]
  10. F. Chen, M. Hu, A. Badiei, M. Yu, Z. Huang, Z. Wang, X. Zhao, Experimental and numerical investigation of a novel photovoltaic/thermal system using micro-channel flat loop heat pipe (PV/T-MCFLHP). International Journal of Low-Carbon Technologies. 15, 513 (2020). [CrossRef] [Google Scholar]
  11. Murugesan, Palpandian, Prince Winston David, Rajvikram Madurai Elavarasan, G. M. Shafiullah, Praveen Kumar Balachandran. A jigsaw puzzle-based reconfiguration technique for enhancing maximum power in partially shaded hybrid photovoltaic array implementation. In Green energy systems. 223 (2023). [Google Scholar]
  12. H. Hassan, S. Harmand, A three-dimensional study of electronic component cooling using a flat heat pipe. Heat Transfer Engineering. 34, 596 (2013). [CrossRef] [Google Scholar]
  13. S. Eswaran, M. Chandru, M. Vairavel, R. Girimurugan, Numerical Study on Solar Water Heater using CFD Analysis. International Journal of Engineering Sciences & Research Technology. 3, 1485 (2014). [Google Scholar]
  14. M. C. Zaghdoudi, S. Maalej, J. Mansouri, M. B. H. Sassi, Flat miniature heat pipes for electronics cooling: State of the art, experimental and theoretical analysis. World Acad Sci Eng Technol. 51, 879 (2011). [Google Scholar]
  15. Prasanth Ponnusamy, S Seenivasan, G Ravivarman, K Sathiyasekar, Ramasamy Girimurugan, Experimental Analysis of Phase Change Materials Supported with Hemp-Stem-Derived Biochar for Enhanced Solar-Thermal Energy Conversion and Storage. IGI Global. 177 (2024). [Google Scholar]
  16. M. T. Ababneh, S. Chauhan, P. Chamarthy, F. M. Gerner, Thermal modeling and experimental validation for high thermal conductivity heat pipe thermal ground planes. J Heat Transfer. 136, (2014). [CrossRef] [PubMed] [Google Scholar]
  17. K Kannakumar, A Murugesan, S Balasubramani, Ramasamy Girimurugan, Achintya Sharma, Enhancing Desalination and Liquid Desiccant Regeneration Efficiency Through a Hybrid Solar Still: A Comparative Study with Steel Scrap Thermal Storage. IGI Global. 133 (2024). [Google Scholar]
  18. S. Lips, F. Lefèvre, J. Bonjour, Physical mechanisms involved in grooved flat heat pipes: Experimental and numerical analyses. International Journal of Thermal Sciences. 50, 1243 (2011). [CrossRef] [Google Scholar]
  19. Manoj Kumar Shanmugam, S Sathishkumar, GB Mohankumar, Ramasamy Girimurugan, Achintya Sharma, Improving Solar Still Performance with Porites Coral Biomaterial: A Comparative Study on Enhanced Efficiency. IGI Global. 283 (2024). [Google Scholar]
  20. S. Maalej, J. Mansouri, M. B. H. Sassi, M. C. Zaghdoudi, Theoretical and experimental study on the thermal performance of flat miniature heat pipes including rectangular grooves. International Review of Mechanical Engineering. 5, 266 (2011). [Google Scholar]
  21. Pongiannan, R. K., Murugaperumal Krishnamoorthy, Suresh Srinivasan, M. Chandrasekaran, C. Bharatiraja, Praveen Kumar, Santhan Kumar Cherukuri, Thanikanti Sudhakar Babu, and Hassan Haes Alhelou. “Cost-effective energy conservation techniques for textile spinning mills.” IEEE Access 10 (2022): 49839-49852. [CrossRef] [Google Scholar]
  22. Srilakshmi, Koganti, Sravanthy Gaddameedhi, Subba Reddy Borra, Praveen Kumar Balachandran, Ganesh Prasad Reddy, Aravindhababu Palanivelu, Shitharth Selvarajan. Optimal design of solar/wind/battery and EV fed UPQC for power quality and power flow management using enhanced most valuable player algorithm. Frontiers in Energy Research 11, 1342085 (2024). [CrossRef] [Google Scholar]
  23. Y. Liang, J. Bai, C. Yan, Y. Tang, G. Zhong, S. Zhang, Experimental investigation on a 0.5-metre-long aluminum flat heat pipe for thermal management in electronic devices. Appl Therm Eng. 241, (2024). [Google Scholar]
  24. R. Girimurugan, M. A. Logesh Kumar, B. Manikandan, C. Shilaja, S. Mayakannan, Static and Total Pressure Analysis of Three-Way Catalytic Convertor using CFD. ECS Transactions. 7381 (2022). [Google Scholar]
  25. J. Xiang, L. Luo, X. Wang, S. Shittu, Z. Wang, X. Zhao, C. Weng, Experimental investigation of a novel micro-channel flat loop heat pipe (MC-FLHP) for data center cooling and heat recovery. International Journal of Green Energy. 19, 1318 (2022). [CrossRef] [Google Scholar]
  26. Z. H. Quan, L. C. Wang, Y. H. Zhao, Y. C. Deng, G. Wang, H. M. Liu, the experimental research on instantaneous efficiency of PV/T module based on micro heat pipe array. Advanced Materials Research. 306 (2013). [Google Scholar]
  27. Y. Ma, Y. Jin, H. Zhang, X. Wang, G. Tang, Experimental study on heat transfer performance of finned gravity heat pipe. Huagong Xuebao/CIESC Journal. 71, 594 (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.