Open Access
Issue
E3S Web Conf.
Volume 620, 2025
2024 12th International Conference on Environment Pollution and Prevention (ICEPP 2024)
Article Number 04001
Number of page(s) 9
Section Circular Economy and Pollution Prevention Policy
DOI https://doi.org/10.1051/e3sconf/202562004001
Published online 12 March 2025
  1. Withanage, S.V. and K. Habib, Life Cycle Assessment and Material Flow Analysis : Two Under-Utilized Tools for Informing E-Waste Management. Sustainability, 2021. 13(14): p. 7939. [CrossRef] [Google Scholar]
  2. N. Perkins, D., et al., E-Waste: A Global Hazard. Annals of Global Health, 2014. 80(4): p. 286. [CrossRef] [PubMed] [Google Scholar]
  3. Cornelis P. Baldé, R.K., Tales Yamamoto, Rosie McDonald, Elena D’Angelo, Shahana Althaf, Garam Bel, Otmar Deubzer, Elena Fernandez-Cubillo, Vanessa Forti, Vanessa Gray, Sunil Herat, Shunichi Honda, Giulia Iattoni, Deepali S. Khetriwal, Vittoria Luda di Cortemiglia, Yuliya Lobuntsova, Innocent Nnorom, Noémie Pralat, Michelle Wagner The Global E-Waste Monitor 2024. 2024, United Nations Institute for Training and Research. [Google Scholar]
  4. Pérez-Belis, V., et al., Environmental performance of alternative end-of-life scenarios for electrical and electronic equipment: A case study for vacuum cleaners. Journal of Cleaner Production, 2017. 159: p. 158–170. [CrossRef] [Google Scholar]
  5. Bovea, M.D., et al., Potential reuse of small household waste electrical and electronic equipment: Methodology and case study. Waste Management, 2016. 53: p. 204–217. [CrossRef] [Google Scholar]
  6. Dindarian, A., A.A.P. Gibson, and J. Quariguasi-Frota-Neto, Electronic product returns and potential reuse opportunities: A microwave case study in the United Kingdom. Journal of Cleaner Production, 2012. 32: p. 22–31. [CrossRef] [Google Scholar]
  7. Bovea, M.D., et al., A survey on consumers’ attitude towards storing and end of life strategies of small information and communication technology devices in Spain. Waste Management, 2018. 71: p. 589–602. [CrossRef] [Google Scholar]
  8. Pérez-Belis, V., M.D. Bovea, and A. Simó, Consumer behaviour and environmental education in the field of waste electrical and electronic toys: A Spanish case study. Waste Management, 2015. 36: p. 277–288. [CrossRef] [Google Scholar]
  9. Li, J., M. Barwood, and S. Rahimifard, A multi-criteria assessment of robotic disassembly to support recycling and recovery. Resources, Conservation and Recycling, 2019. 140: p. 158–165. [CrossRef] [Google Scholar]
  10. Schischke, K., et al., Life cycle energy analysis of PCs-Environmental consequences of lifetime extension through reuse. power, 2003. 4(5.248): p. 5.032. [Google Scholar]
  11. Lu, B., et al., Comparison on End-of-Life strategies of WEEE in China based on LCA. Frontiers of Environmental Science & Engineering, 2017. 11: p. 1–12. [CrossRef] [Google Scholar]
  12. Zink, T., et al., Comparative life cycle assessment of smartphone reuse: repurposing vs. refurbishment. The International Journal of Life Cycle Assessment, 2014. 19: p. 1099–1109. [CrossRef] [Google Scholar]
  13. Pini, M., et al., Preparation for reuse activity of waste electrical and electronic equipment: Environmental performance, cost externality and job creation. Journal of Cleaner Production, 2019. 222: p. 77–89. [CrossRef] [Google Scholar]
  14. Bovea, M.D., V. Ibanez-Fores, and V. Perez-Belis, Repair vs. replacement: Selection of the best end-of-life scenario for small household electric and electronic equipment based on life cycle assessment. Journal of Environmental Management, 2020. 254: p. 109679. [CrossRef] [PubMed] [Google Scholar]
  15. Vanessa Forti, et al., The Global E-waste Monitor 2020. 2020, United Nations Institute for Training and Research. [Google Scholar]
  16. OECD. Waste from electrical and electronic equipment. 2021 31.10.2024]; Available from: https://data-explorer.oecd.org/vis?tenant=archive&df[ds]=DisseminateArchiveDMZ&df[id]=DFEWASTE&df[ag]=OECD&dq=AUS.EE6%2BEESE..&pd=2000%2C2021&to[TIMEPERIOD]=false&vw=tb. [Google Scholar]
  17. Australian Government and Department of the Environment, The National Television and Computer Recycling Scheme —Operational Review. 2014. [Google Scholar]
  18. Department of Agriculture and Water and Environment, Stewardship for Consumer and Other Electrical and Electronic Products (Discussion Paper). 2021. [Google Scholar]
  19. Productivity Commission, Right to Repair - Productivity Commission Inquiry Report. 2021, Australian Government. [Google Scholar]
  20. Banaszkiewicz, K., et al., Household E-Waste Management: A Case Study of Wroclaw, Poland. Sustainability (Switzerland), 2022. 14(18). [Google Scholar]
  21. Office of Circular Economy and Department of Environment and Science, Queensland E-Products Action Plan 2023 - 2033 (Draft), E.a. Science, Editor. 2023. [Google Scholar]
  22. Jayasiri, G., S. Herat, and P. Kaparaju, Repair and Reuse or Recycle: What Is Best for Small WEEE in Australia? Sustainability, 2024. 16(7): p. 3035. [CrossRef] [Google Scholar]
  23. Golev, A., et al., Where next on e-waste in Australia? Waste Management, 2016. 58: p. 348–358. [CrossRef] [Google Scholar]
  24. Islam, M.T. and N. Huda, E-waste in Australia: Generation estimation and untapped material recovery and revenue potential. Journal of Cleaner Production, 2019. 237: p. 117787. [CrossRef] [Google Scholar]
  25. Randell, P., Victorian e-waste material flow analysis 2021. 2022, Randell Environmental Consulting, Blue Environment. [Google Scholar]
  26. Bontinck PA, et al., E-product stewardship in Australia: Evidence report. A report prepared for the Commonwealth Department of Agriculture, Water and the Environment by Iceni Group and Lifecycles, Sydney, Australia. 2021. [Google Scholar]
  27. Busby G and Bremner A.M, Western Australia E-Waste Material Flow Analysis. 2021, Encycle Consulting. [Google Scholar]
  28. Robinson, B.H., E-waste: an assessment of global production and environmental impacts. Science of the total environment, 2009. 408(2): p. 183–191. [CrossRef] [Google Scholar]
  29. Ikhlayel, M., Differences of methods to estimate generation of waste electrical and electronic equipment for developing countries: Jordan as a case study. Resources, Conservation and Recycling, 2016. 108: p. 134–139. [CrossRef] [Google Scholar]
  30. European Committee of Domestic Equipment Manufacturers (CECED), Material Flows of the Home Appliance Industry. 2018. [Google Scholar]
  31. Tran, H.P., et al., Material flow analysis for management of waste TVs from households in urban areas of Vietnam. Resources, Conservation and Recycling, 2018. 139: p. 78–89. [CrossRef] [Google Scholar]
  32. Habuer, J. Nakatani, and Y. Moriguchi, Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China. Waste Management, 2014. 34(2): p. 489–497. [CrossRef] [Google Scholar]
  33. Parajuly, K., K. Habib, and G. Liu, Waste electrical and electronic equipment (WEEE) in Denmark: Flows, quantities and management. Resources, Conservation and Recycling, 2017. 123: p. 85–92. [CrossRef] [Google Scholar]
  34. Forti V., B.C.P., Kuehr R, E-Waste Statistics: Guidelines on classification, reporting and indicators. 2018, United Nations University, IAS - SCYCLE, Bonn, Germany. [Google Scholar]
  35. King, A.M., et al., Reducing waste: repair, recondition, remanufacture or recycle? Sustainable Development, 2006. 14(4): p. 257–267. [CrossRef] [Google Scholar]
  36. Jayasiri, G., S. Herat, and P. Kaparaju, Management of Small WEEE: Future Directions for Australia. Sustainability, 2023. 15(18): p. 13543. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.