EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 621 (2025) E3S Web Conf., 621 (2025) 01004 References
Open Access
Issue
E3S Web Conf.
Volume 621, 2025
Second International Conference on Green Energy, Environmental Engineering and Sustainable Technologies 2024 (ICGEST 2024)
Article Number 01004
Number of page(s) 10
Section Application of Sustainable Technology in Construction Industry
DOI https://doi.org/10.1051/e3sconf/202562101004
Published online 19 March 2025
  1. Bao, Zhikang, and Weisheng Lu. “A decision-support framework for planning construction waste recycling: A case study of Shenzhen, China.” Journal of cleaner production 309 (2021): 127449. [CrossRef] [Google Scholar]
  2. Li, Long, et al. “A new framework of industrialized construction in China: Towards on-site industrialization.” Journal of Cleaner Production 244 (2020): 118469. [CrossRef] [Google Scholar]
  3. Vilventhan, Aneetha, V. G. Ram, and S. Sugumaran. “Value stream mapping for identification and assessment of material waste in construction: A case study.” Waste Management & Research 37.8 (2019): 815-825. [Google Scholar]
  4. Hao, Jianli, et al. “A model for assessing the economic performance of construction waste reduction.” Journal of Cleaner Production 232 (2019): 427-440. [CrossRef] [Google Scholar]
  5. Davis, Peter, et al. “The classification of construction waste material using a deep convolutional neural network.” Automation in construction 122 (2021): 103481. [CrossRef] [Google Scholar]
  6. Wu, Zezhou, T. W. Ann, and Chi Sun Poon. “An off-site snapshot methodology for estimating building construction waste composition-a case study of Hong Kong.” Environmental Impact Assessment Review 77 (2019): 128-135. [Google Scholar]
  7. Guerra, Beatriz C., Fernanda Leite, and Kasey M. Faust. “4D-BIM to enhance construction waste reuse and recycle planning: Case studies on concrete and drywall waste streams.” Waste Management 116 (2020): 79-90. [Google Scholar]
  8. Osmani, Mohamed, and Paola Villoria-Sáez. “Current and emerging construction waste management status, trends and approaches.” Waste. Academic Press, 2019. [Google Scholar]
  9. Bajjou, Mohamed Saad, and Anas Chafi. “Identifying and managing critical waste factors for lean construction projects.” Engineering management journal 32.1 (2020): 2-13. [Google Scholar]
  10. Mahamid, Ibrahim. “Impact of rework on material waste in building construction projects.” International Journal of Construction Management 22.8 (2022): 1500-1507. [CrossRef] [Google Scholar]
  11. Turkyilmaz, Ali, et al. “A comprehensive construction and demolition waste management model using PESTEL and 3R for construction companies operating in Central Asia.” Sustainability 11.6 (2019): 1593. [Google Scholar]
  12. Kabirifar, Kamyar, Mohammad Mojtahedi, and Cynthia Changxin Wang. “A systematic review of construction and demolition waste management in Australia: Current practices and challenges.” Recycling 6.2 (2021): 34. [Google Scholar]
  13. Xing, Weiqi, et al. “Implementing lean construction techniques and management methods in Chinese projects: A case study in Suzhou, China.” Journal of cleaner production 286 (2021): 124944. [CrossRef] [Google Scholar]
  14. Perera, Srinath, Mary Hardie, and Shiyamini Ratnasabapathy. “Liquid waste management in the construction projects.” (2021). [Google Scholar]
  15. Maradzano, Isabellah, Richmore Aron Dondofema, and Stephen Matope. “Application of lean principles in the South African construction industry.” South African Journal of Industrial Engineering 30.3 (2019): 210-223. [Google Scholar]
  16. Regona, Massimo, et al. “Opportunities and adoption challenges of AI in the construction industry: a PRISMA review.” Journal of Open Innovation: Technology, Market, and Complexity 8.1 (2022): 45. [CrossRef] [Google Scholar]
  17. El-Sayegh, Sameh M., et al. “Key contractor selection criteria for green construction projects in the UAE.” International Journal of Construction Management 21.12 (2021): 1240-1250. [CrossRef] [Google Scholar]
  18. Purchase, Callun Keith, et al. “Circular economy of construction and demolition waste: A literature review on lessons, challenges, and benefits.” Materials 15.1 (2021): 76. [Google Scholar]
  19. Daoud, Ahmed Osama, et al. “An investigation into solid waste problem in the Egyptian construction industry: A mini-review.” Waste Management & Research 38.4 (2020): 371-382. [Google Scholar]
  20. Aslam, Muhammad Shahzad, Beijia Huang, and Lifeng Cui. “Review of construction and demolition waste management in China and USA.” Journal of Environmental Management 264 (2020): 110445. [CrossRef] [PubMed] [Google Scholar]
  21. Bao, Zhikang, Wendy MW Lee, and Weisheng Lu. “Implementing on-site construction waste recycling in Hong Kong: Barriers and facilitators.” Science of the Total Environment 747 (2020): 141091. [Google Scholar]
  22. Edike, Uche Emmanuel. “Material management practices and factors influencing material conservation on construction sites in Nigeria.” Journal of Engineering, Design and Technology 21.4 (2023): 1197-1211. [CrossRef] [Google Scholar]
  23. Kabirifar, Kamyar, et al. “Construction and demolition waste management contributing factors coupled with reduce, reuse, and recycle strategies for effective waste management: A review.” Journal of Cleaner Production 263 (2020): 121265. [CrossRef] [Google Scholar]
  24. Liu, Jingkuang, et al. “System dynamic analysis of construction waste recycling industry chain in China.” Environmental Science and Pollution Research 27 (2020): 37260-37277. [Google Scholar]
  25. Yuan, Hongping, et al. “A dissipative structure theory-based investigation of a construction and demolition waste minimization system in China.” Journal of Environmental Planning and Management 65.3 (2022): 514-535. [CrossRef] [Google Scholar]
  26. Amaral, Rosaria EC, et al. “Waste management and operational energy for sustainable buildings: a review.” Sustainability 12.13 (2020): 5337. [Google Scholar]
  27. Saka, Abdullahi Babatunde, Fatai Oladayo Olaore, and Timothy Oluwatosin Olawumi. “Post-contract material management and waste minimization: An analysis of the roles of quantity surveyors.” Journal of Engineering, Design and Technology 17.4 (2019): 793-807. [CrossRef] [Google Scholar]
  28. Chi, Bin, et al. “Construction waste minimization in green building: A comparative analysis of LEED-NC 2009 certified projects in the US and China.” Journal of cleaner production 256 (2020): 120749. [CrossRef] [Google Scholar]
  29. Ma, Mingxue, et al. “Challenges in current construction and demolition waste recycling: A China study.” Waste Management 118 (2020): 610-625. [CrossRef] [Google Scholar]
  30. Ogunmakinde, Olabode Emmanuel, William Sher, and Kim Maund. “An assessment of material waste disposal methods in the Nigerian construction industry.” Recycling 4.1 (2019): 13. [Google Scholar]
  31. Lam, Patrick TI, et al. “Methodology for upstream estimation of construction waste for new building projects.” Journal of cleaner production 230 (2019): 1003-1012. [CrossRef] [Google Scholar]
  32. Liu, Jingkuang, Yixuan Chen, and Xuetong Wang. “Factors driving waste sorting in construction projects in China.” Journal of Cleaner Production 336 (2022): 130397. [CrossRef] [Google Scholar]
  33. Liu, Jingkuang, Yanqing Yi, and Xuetong Wang. “Exploring factors influencing construction waste reduction: A structural equation modeling approach.” Journal of Cleaner Production 276 (2020): 123185. [CrossRef] [Google Scholar]
  34. Melenbrink, Nathan, Justin Werfel, and Achim Menges. “On-site autonomous construction robots: Towards unsupervised building.” Automation in construction 119 (2020): 103312. [CrossRef] [Google Scholar]
  35. Lima, Luanda, et al. “Sustainability in the construction industry: A systematic review of the literature.” Journal of Cleaner Production 289 (2021): 125730. [CrossRef] [Google Scholar]
  36. Ratnasabapathy, S., Alashwal, A., & Perera, S. (2021). Exploring the barriers for implementing waste trading practices in the construction industry in Australia. Built Environment Project and Asset Management, 11(4), 559-576. [Google Scholar]
  37. Ali, Tauha Hussain, et al. “Application of artifical intelligence in construction waste management.” 2019 8th International Conference on Industrial Technology and Management (ICITM). IEEE, 2019. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.