Open Access
| Issue |
E3S Web Conf.
Volume 625, 2025
5th International Conference on Environment Resources and Energy Engineering (ICEREE 2025)
|
|
|---|---|---|
| Article Number | 02018 | |
| Number of page(s) | 4 | |
| Section | Environmental Pollution Control and Ecological Restoration | |
| DOI | https://doi.org/10.1051/e3sconf/202562502018 | |
| Published online | 17 April 2025 | |
- Y.L. He, S.Z. Tang, F.L. Wang, Q.X. Zhao, W.Q. Tao, Gas-side fouling, erosion and corrosion of heat exchanger for middle and low temperature flue gas waste heat recovery, Chin. Sci. Bull, 61(17) (2016) 1858-1876. [CrossRef] [Google Scholar]
- L.L. Baxter, R.W. DeSollar, A mechanistic description of ash deposition during pulverized coal combustion: predictions compared with observations, Fuel, 72(10) (1993) 1411-1418. [CrossRef] [Google Scholar]
- M. Ramezani, B. Sun, S. Subramaniam, M.G. Olsen, Detailed experimental and numerical investigation of fluid-particle interactions of a fixed train of spherical particles inside a square duct, Int. J. Multiphase Flow, 103 (2018) 16-29. [CrossRef] [Google Scholar]
- Y.A. Baranyshyn, S.P. Fisenko, O.G. Penyazkov, Heat transfer and growth of nano-and submicron particles of black carbon in nonequilibrium gas mixture. Experiment and simulation, Int. J. Heat Mass Transfer, 53(23-24) (2010) 5465-5471. [CrossRef] [Google Scholar]
- R. Ansart, P. García-Triñanes, B. Boissière, H. Benoit, J. P.K. Seville, O. Simonin, Dense gas-particle suspension upward flow used as heat transfer fluid in solar receiver: PEPT experiments and 3D numerical simulations, Powder Technol., 307 (2017) 25-36. [CrossRef] [Google Scholar]
- A.S. Ahuja, Augmentation of heat transport in laminar flow of polystyrene suspensions. I. Experiments and results, J. Appl. Phys., 46(8) (1975) 3408-3416. [CrossRef] [Google Scholar]
- N. Zhang, X. Wei, Q.R. Yang, N. Li, E. Yao, Numerical simulation and experimental study of the growth characteristics of particulate fouling on pipe heat transfer surface, Heat Mass Transfer., 55(3) (2018) 687-698. [Google Scholar]
- F.L. Zhan, D.W. Zhuang, G.L. Ding, J.J. Tang, Numerical model of particle deposition on fin surface of heat exchanger, Int. J. Refrig., 72 (2016) 27-40. [CrossRef] [Google Scholar]
- R.R. Cai, H. Lu, L.Z. Zhang, Evaluation the effect of fiber alignment on particle collection performance of mechanical/electret filters based on Voronoi tessellations, Chem. Eng. Sci., 197 (2019) 109-119. [CrossRef] [Google Scholar]
- H. Han, Y.L. He, W.Q. Tao, Y.S. Li, A parameter study of tube bundle heat exchangers for fouling rate reduction, Int. J. Heat Mass Transfer, 72 (2014) 210-221. [CrossRef] [Google Scholar]
- A. J. Pan, L. Z. Zhang, R. R. Cai, et al. Fluid flow and heat transfer of a gas stream containing dust particles in a parallel-plates duct, ASME J. Heat Mass Transfer, 144(2022)111801. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.