Open Access
Issue
E3S Web Conf.
Volume 632, 2025
The 5th Edition of Oriental Days for the Environment “Green Lab. Solution for Sustainable Development” (JOE5)
Article Number 04006
Number of page(s) 7
Section Renewable Energies & Circular Economy
DOI https://doi.org/10.1051/e3sconf/202563204006
Published online 03 June 2025
  1. J.M. Allwood, J.M. Cullen, R.L. Milford, Options for achieving a 50% cut in industrial carbon emissions by 2050. Environ. Sci. Technol. 44, 1888-1894 (2010). https://doi.org/10.1021/es902909k [CrossRef] [PubMed] [Google Scholar]
  2. O. Akashi, T. Hanaoka, Technological feasibility and costs of achieving a 50 % reduction of global GHG emissions by 2050: mid- and long-term perspectives. Sustain. Sci. 7, 139–156 (2012). https://doi.org/10.1007/s11625-012-0166-4 [CrossRef] [Google Scholar]
  3. M.R.A. Putra, M. Nizam, B. Setiawan, H.P. Santoso, The effect of battery manufacturing under different conditions and its contribution to co emissions. MEKANIKA. 24, 73-79 (2025). https://dx.doi.org/10.20961/mekanika.v24i1.99093 [CrossRef] [Google Scholar]
  4. M. Meinshausen, N. Meinshausen, W. Hare, S.C.B. Raper, K. Frieler, R. Knutti, D.J. Frame, M.R. Allen. Greenhouse-gas emission targets for limiting global warming to 2 °C. Nature. 458, 1158–1162 (2009). https://doi.org/10.1038/nature08017 [CrossRef] [PubMed] [Google Scholar]
  5. A. Fajri, M. Jurkovič, E.M. Kandimba, A. Lutanto, F. Falah, R. Adiputra, N. Firdaus, Recent advancements in ocean current turbine blade design: a review of geometrical shape, performance and potential development using cae. MEKANIKA. 23, 108–123 (2024). https://dx.doi.org/10.20961/mekanika.v23i2.87374 [CrossRef] [Google Scholar]
  6. M.A.M. Rosli, A.A. Mahadi, C. Harsito, S.D. Prasetyo, Design of a solar power plant system for government buildings in the ibu kota nusantara of indonesia using homer optimization. MEKANIKA. 24, 7 – 19 (2025). https://dx.doi.org/10.20961/mekanika.v24i1.92798 [CrossRef] [Google Scholar]
  7. M.F. Lazuardy, M. Fakhruddin, Comparative analysis of the size of glass fiber woven roving based on a polyester matrix on the impact strength of composite materials. MEKANIKA. 23, 12-21 (2024). https://dx.doi.org/10.20961/mekanika.v23i1.76695 [CrossRef] [Google Scholar]
  8. H.I. Akbar, M.I.A. Atmaja, E. Surojo, B. Kusharjanta, R.A. Fanani, Magnesium addition and treatment of reinforcement particles in AL 6061– sea sand composite on coefficients friction and wear rate. MEKANIKA. 23, 33-40 (2024). https://dx.doi.org/10.20961/mekanika.v23i1.78335 [CrossRef] [Google Scholar]
  9. P.K. Mallick Fiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition (3rd ed.). CRC Press. (2007). https://doi.org/10.1201/9781420005981 [Google Scholar]
  10. D. Damodharan, B.R. Kumar, K. Gopal, M.V. De Poures, B. Sethuramasamyraja, Utilization of waste plastic oil in diesel engines: a review. Rev. Environ. Sci. Biotechnol. 18, 681–697 (2019). https://doi.org/10.1007/s11157-019-09516-x [CrossRef] [Google Scholar]
  11. K. Shanmugam, G. Venkataramana, Y. Pooja, A. Dimitris, T. Mats, V.K.K. Upadhyayula, Advanced high-strength steel and carbon fiber reinforced polymer composite body in white for passenger cars: Environmental performance and sustainable return on investment under different propulsion modes. ACS Sustainable Chem. Eng. 7, 4951–4963 (2019). https://doi.org/10.1021/acssuschemeng.8b05588 [CrossRef] [Google Scholar]
  12. C. Red, Automotive CFRP: The shape of things to come. Compos. Tech. 18, 30-35 (2013). http://www.compositesworld.com/articles/automotive-cfrp-the-shape-of- things-to-come [Accessed: 31/01/2025] [Google Scholar]
  13. R. Naik, S.C. Prashantha, H. Nagabhushana, S.C. Sharma, H.P. Nagaswarupa, K.S. Anantharaju, D.M. Jnaneshwara, K.M. Girish, Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes Pigm. 127, 25-36 (2016). https://doi.org/10.1016/j.dyepig.2015.12.014 [CrossRef] [Google Scholar]
  14. A. Mohajerani, L. Burnett, J.V. Smith, S. Markovski, G. Rodwell, M.T. Rahman, H. Kurmus, M. Mirzababaei, A. Arulrajah, S. Horpibulsuk, F. Maghool, Recycling waste rubber tyres in construction materials and associated environmental considerations: A review. Resour. Conserv. Recycl. 155, 104679 (2020). https://doi.org/10.1016/j.resconrec.2020.104679 [CrossRef] [Google Scholar]
  15. S. Sunardi, D. Ariawan, E. Surojo, A.R. Prabowo, H.I. Akbar, B. Cao, H. Carvalho, Assessment of eggshell-based material as a green-composite filler: Project milestones and future potential as an engineering material. J. Mech. Behav. Mat. 32, 20220269 (2023). https://doi.org/10.1515/jmbm-2022-0269 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.