Open Access
| Issue |
E3S Web Conf.
Volume 633, 2025
International Forum of Global Advances in Sustainable Environment, Energy, and Earth Sciences (GASES 2025)
|
|
|---|---|---|
| Article Number | 08004 | |
| Number of page(s) | 9 | |
| Section | Energy Engineering and Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202563308004 | |
| Published online | 04 June 2025 | |
- H. Zhang, Y. Li, P. Wang, “Structural Changes in Loess During Mechanical Activation”, Journal of Materials Science 54(3), 1125–1137 (2019), DOI: 10.1007/s10853-019-3456-7 [Google Scholar]
- R. Z. Rakhimov, R. A. Khusainova, “Optimization of High-Energy Milling Conditions for Loess-Based Materials”, Construction and Building Materials 235, 117469 (2020), DOI: 10.1016/j.conbuildmat.2020.117469 [Google Scholar]
- M. Ghorbani, S. Hashemi, “The Impact of Mechanoactivation on the Hydration Behavior of Loess-Based Blended Cements”, Cement and Concrete Research 145, 106455 (2021), DOI: 10.1016/j.cemconres.2021.106455 [CrossRef] [Google Scholar]
- X. Liu, J. Chen, “Review of Mechanical Milling Techniques for Enhancing Pozzolanic Activity in Loess”, Powder Technology 398, 117034 (2022), DOI: 10.1016/j.powtec.2022.117034 [Google Scholar]
- L. Wang, F. Zhao, “The Role of Particle Size Reduction in Loess-Based Binders”, Advanced Materials Research 1167, 378–386 (2023), DOI: 10.4028/www.scientific.net/AMR.1167.378 [Google Scholar]
- P. Nikolaev, E. Makarov, “Influence of Milling Time on Loess Reactivity”, Journal of Building Engineering 32, 101755 (2020), DOI: 10.1016/j.jobe.2020.101755 [CrossRef] [Google Scholar]
- S. K. Komilov, “Historical technology of production of gypsum mortar of historic monuments in Central Asia”, International Journal for Innovative Research in Multidisciplinary Field, 152–157 (2019) [Google Scholar]
- M. Jumaniyazov, S. Tadjiev, E. Atashev, “Results of X-Ray phase and IR-spectral analysis of azosuperphosphates obtained on the basis of phosphorites of central Kizilkum”, Chemical Technology, Control and Management 3, 19–25 (2021) [Google Scholar]
- R. Ahmadov, N. Mammadov, “Loess and its use in the production of binders”, Journal of Construction Materials 12(3), 45–52 (2020) [Google Scholar]
- V. N. Gusev, P. A. Ivanov, “Mechanochemical activation of mineral raw materials”, Materials Science and Engineering 27(2), 89–97 (2018) [Google Scholar]
- T. Johnson, L. Baker, “Advances in the production of sustainable binders from loess”, Green Construction Journal 9(4), 131–145 (2021) [Google Scholar]
- ASTM C109/C109M-21, “Standard Test Method for Compressive Strength of Hydraulic Cement Mortars”, ASTM International (2021) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.