Open Access
| Issue |
E3S Web Conf.
Volume 638, 2025
International Conference on Electronics, Engineering Physics and Earth Science (EEPES 2025)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 11 | |
| Section | Applied and Engineering Physics | |
| DOI | https://doi.org/10.1051/e3sconf/202563803007 | |
| Published online | 16 July 2025 | |
- M. Eryildiz, E. Kosa, I. Akgun, B. Yavuzer, Enhancing 3D-Printed PP-CF Parts: A Novel Resin-Filling Technique for Mechanical Property Optimization, Journal of Thermoplastic Composite Materials, 38, 878–892 (2025) [Google Scholar]
- U. Cicek, A. Johnson, Multi-Objective Optimization of FDM Process Parameters for 3D-Printed Polycarbonate Using Taguchi-Based Gray Relational Analysis, The International Journal of Advanced Manufacturing Technology 137, 3709–3725 (2025) [Google Scholar]
- O. Der, A. Alqahtani, M. Marengo, V. Bertola, Characterization of Polypropylene Pulsating Heat Stripes: Effects of Orientation, Heat Transfer Fluid, and Loop Geometry, Appl Therm Eng 184, 116304 (2020) [Google Scholar]
- G. Basar, O. Der, Multi-Objective Optimization of Process Parameters for Laser Cutting Polyethylene Using Fuzzy AHP-Based MCDM Methods, in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2025), doi:10.1177/09544089251319202 [Google Scholar]
- J. Kechagias, K. Ninikas, P. Stavropoulos, K. Salonitis, Generalised Approach on Kerf Geometry Prediction during CO2 Laser Cut of PMMA Thin Plates Using Neural Networks, Lasers in Manufacturing and Materials Processing, 8, 372–393 (2021) [Google Scholar]
- A. Alhawsawi, E. Moustafa, M. Fujii, E. Banoqitah, A. Elsheikh, Kerf Characteristics during CO2 Laser Cutting of Polymeric Materials: Experimental Investigation and Machine Learning-Based Prediction, Engineering Science and Technology, an International Journal, 46, 101519, (2023) [Google Scholar]
- J. Kechagias, K. Ninikas, M. Petousis, N. Vidakis, N. Vaxevanidis, An Investigation of Surface Quality Characteristics of 3D Printed PLA Plates Cut by CO2 Laser Using Experimental Design, Materials and Manufacturing Processes 36, 1544–1553 (2021) [Google Scholar]
- J. Kechagias, N. Fountas, K. Ninikas, M. Petousis, N. Vidakis, N. Vaxevanidis, Surface Characteristics Investigation of 3D-Printed PET-G Plates during CO2 Laser Cutting, Materials and Manufacturing Processes 37, 1347–1357 (2022) [Google Scholar]
- J. Kechagias, K. Ninikas, M. Petousis, N. Vidakis, Laser Cutting of 3D Printed Acrylonitrile Butadiene Styrene Plates for Dimensional and Surface Roughness Optimization, in The International Journal of Advanced Manufacturing Technology, 119, 2301–2315, (2022), doi:10.1007/s00170-021-08350-2 [Google Scholar]
- M. Moradi, M. Karami Moghadam, M. Shamsborhan, M. Bodaghi, H. Falavandi, Post-Processing of FDM 3D-Printed Polylactic Acid Parts by Laser Beam Cutting, Polymers (Basel) 12, 550, (2020), doi:10.3390/polym12030550 [Google Scholar]
- H. Sabri, O. Mehrabi, M. Khoran, M. Moradi, Leveraging CO2 Laser Cutting for Enhancing Fused Deposition Modeling (FDM) 3D Printed PETG Parts through Postprocessing, in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024), doi:10.1177/09544089241274037 [Google Scholar]
- K. Kumar, P. Babu, Investigation on Polymer Hybrid Composite Through CO2 Laser Machining for Precise Machining Conditions, International Journal of Precision Engineering and Manufacturing 25, (2025) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.