Open Access
| Issue |
E3S Web Conf.
Volume 645, 2025
The 1st International Conference on Green Engineering for Sustainable Future (ICoGESF 2025)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 14 | |
| Section | Smart and Sustainable Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202564502009 | |
| Published online | 28 August 2025 | |
- X. Liu et al., MPC-based high-speed trajectory tracking for 4WIS robot, ISA Transactions. 123, pp. 413-424 (2022). https://doi.org/10.1016/j.isatra.2021.05.018. [Google Scholar]
- X. Chen, Y. Qu, T. Cui, and J. Zhao, Nonlinear hierarchical control for four-wheel- independent-drive electric vehicle, Complex Eng Syst. 3, 2 (2023). https://doi.org/10.20517/ces.2022.50. [Google Scholar]
- V. Borisenko, A. Kiselev, L. Leoro, A. Borovkov, and Y. Boldyrev, K&C suspension parameters stability by production tolerances. E3S Web Conf. 140, 07007 (2019). https://doi.org/10.1051/e3sconf/201914007007. [Google Scholar]
- S. Yarmohammadisatri, A. Khalkhali, and C. Claudel, Robust design of multi-body model of steering mechanism based on uncertainties of suspension parameters, J Braz. Soc. Mech. Sci. Eng. 45, 9 (2023). https://doi.org/10.1007/s40430-023-04379-4. [Google Scholar]
- T. Schmitz, Chassis concept of the individually steerable five-link suspension: a novel approach to maximize the road wheel angle to improve vehicle agility, Automot. Engine Technol. 9, 1 (2024). https://doi.org/10.1007/s41104-024-00142-6. [Google Scholar]
- A. Afkar, M. Mahmoodi-Kaleibar, and A. Paykani, Geometry optimization of double wishbone suspension system via genetic algorithm for handling improvement. Journal of Vibroengineering. 14, 827-837 (2012). [Google Scholar]
- H. B. Pacejka and I. Besselink, Tire and vehicle dynamics, 3d edition (Oxford Waltham: Butterworth-Heinemann Elsevier, 2012). [Google Scholar]
- J. Balkwill, Suspension Kinematics, in Performance Vehicle Dynamics, (Elsevier, Oxford, 2018). https://doi.org/10.1016/C2016-0-03741-5. [Google Scholar]
- J. Reimpell, H. Stoll, and J. W. Betzler, The Automotive chassis: engineering principles, 2nd ed., (Butterworth-Heinemann, Oxford, 2001). [Google Scholar]
- S. Jung and D. A. Guenther, An Examination of the Maneuverability of an All Wheel Steer Vehicle at Low Speed. SAE Technical Paper, 910241 (1991). https://doi.org/10.4271/910241. [Google Scholar]
- P. Hang and X. Chen, Towards Autonomous Driving: Review and Perspectives on Configuration and Control of Four-Wheel Independent Drive/Steering Electric Vehicles. Actuators. 10, 8 (2021). https://doi.org/10.3390/act10080184. [Google Scholar]
- P. Hang, X. Chen, S. Fang, and F. Luo, Robust control for four-wheel-independentsteering electric vehicle with steer-by-wire system. Int.J Automot. Technol. 18, 5 (2017). https://doi.org/10.1007/s12239-017-0078-5. [Google Scholar]
- T. Kobayashi, E. Katsuyama, H. Sugiura, E. Ono, and M. Yamamoto, Efficient direct yaw moment control: tyre slip power loss minimisation for four-independent wheel drive vehicle, Vehicle System Dynamics. 56, 5 (2018). https://doi.org/10.1080/00423114.2017.1330483. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.