Open Access
Issue
E3S Web Conf.
Volume 646, 2025
Global Environmental Science Forum “Sustainable Development of Industrial Region” (GESF-2025)
Article Number 00043
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202564600043
Published online 28 August 2025
  1. V.M. Ivanov, Y.V. Kozhukhov, A.M. Danilishin, Calculation of the impellers head characteristics of the low-flow centrifugal compressor stages based on quasi-three-dimensional inviscid and viscous methods. AIP Conf. Proc. 2141, 030064 (2019). https://doi.org/10.1063/1.5122114 [Google Scholar]
  2. Y.P. Li, Y.W. Feng, C. Wang, Z.W. Xing, D. Ren, L. Fu, Performance evaluation and optimization of the cascade refrigeration system based on the digital twin model. Appl. Therm. Eng. 248, 123160 (2024). https://doi.org/10.1016/j.applthermaleng.2024.123160 [Google Scholar]
  3. S.K. Cho, S. Son, J. Lee, S.-W. Lee, Y. Jeong, B.S. Oh, J.I. Lee, Optimum loss models for performance prediction of supercritical CO2 centrifugal compressor. Appl. Therm. Eng. 184, 116255 (2021). https://doi.org/10.1016/j.applthermaleng.2020.116255 [Google Scholar]
  4. Z. Yang, H. Jiang, W. Zhuge, Y. Qian, Y. Zhang, Design of a partial discharge shrouded impeller for the centrifugal compressor of supercritical carbon dioxide power cycles. Energy 307, 132713 (2024). https://doi.org/10.1016/j.energy.2024.132713 [Google Scholar]
  5. L.O. Salviano, E.E. Gasparin, V.C.N. Mattos et al., Sensitivity analysis and optimization of a CO2 centrifugal compressor impeller with a vaneless diffuser. Struct. Multidiscip. Optim. 64, 1607–1627 (2021). https://doi.org/10.1007/s00158-021-02914-2 [Google Scholar]
  6. W. Bao, C. Yang, W. Wang, Y. Du, L. Fu, Effect of inlet temperature on flow behavior and performance characteristics of supercritical carbon dioxide compressor. Nucl. Eng. Des. 380, 111296 (2021). https://doi.org/10.1016/j.nucengdes.2021.111296 [Google Scholar]
  7. B. Zhao, Z. Liu, Theoretical Analysis of Isentropic Exponent Effects on the Internal Flow of Supercritical CO2 Centrifugal Compressors. Int. J. Chem. Eng. 2022, 1809835 (2022). https://doi.org/10.1155/2022/1809835 [Google Scholar]
  8. J. Hosseinpour, M. Messele, A. Engeda, Design and development of a stable supercritical CO2 centrifugal compressor. Therm. Sci. Eng. Prog. 47, 102273 (2024). https://doi.org/10.1016/j.tsep.2023.102273 [Google Scholar]
  9. A. Ameli, T. Turunen-Saaresti, J. Backman, Numerical Investigation of the Flow Behavior Inside a Supercritical CO2 Centrifugal Compressor. J. Eng. Gas Turb. Power 140, 122604 (2018). https://doi.org/10.1115/1.4040577 [Google Scholar]
  10. A. Romei, P. Gaetani, G. Persico, Computational fluid-dynamic investigation of a centrifugal compressor with inlet guide vanes for supercritical carbon dioxide power systems. Energy 255, 124469 (2022). https://doi.org/10.1016/j.energy.2022.124469 [Google Scholar]
  11. S. Jarungthammachote, Calculation of optimum interstage pressure of two-stage CO2 compression using cubic equations of state. Eng. Appl. Sci. Res. 51, 1–10 (2024). https://doi.org/10.14456/easr.2024.1 [Google Scholar]
  12. H.S. Vorobieva, Effect detection of using a modified Redlich-Kwong-Aungier equation of state on the calculation of carbon dioxide flow in a centrifugal compressor. East.-Eur. J. Enterp. Technol. 2, 44–54 (2024). https://doi.org/10.15587/1729-4061.2024.302837 [Google Scholar]
  13. F. Miao, J. Yin, J. Feng, J. Zhao, Exploring the Thermodynamics and Dynamics of CO2 Using Rigid Models. Processes 13, 148 (2025). https://doi.org/10.3390/pr13010148 [Google Scholar]
  14. Y. Zhu, S. Liang, C. Guo, Y. Guo, Z. Li, X. Gong, Y. Jiang, Experimental study on a supercritical CO2 centrifugal compressor used in a MWe scale power cycle. Appl. Sci. 13, 385 (2022). https://doi.org/10.3390/app13010385 [Google Scholar]
  15. X.Y. Zhang, Y.T. Ge, J.N. Sun, Performance analysis of finned-tube CO2 gas cooler with advanced 1D-3D CFD modelling development and simulation. Appl. Therm. Eng. 176, 115421 (2020). https://doi.org/10.1016/j.applthermaleng.2020.115421 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.