EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 648 (2025) E3S Web Conf., 648 (2025) 02007 References
Open Access
Issue
E3S Web Conf.
Volume 648, 2025
International Conference on Civil, Environmental and Applied Sciences (ICCEAS 2025)
Article Number 02007
Number of page(s) 10
Section Environmental Sciences
DOI https://doi.org/10.1051/e3sconf/202564802007
Published online 08 September 2025
  1. Ahmad, M. R., Chen, B., Haque, M. A., & Oderji, S. Y. (2020). Multiproperty characterization of cleaner and energy-efficient vegetal concrete based on one-part geopolymer binder. Journal of Cleaner Production, 253, 119916. https://doi.org/10.1016/j.jclepro.2019.119916. [Google Scholar]
  2. Ghadir, P., & Razeghi, H. R. (2022). Effects of sodium chloride on the mechanical strength of alkali activated volcanic ash and slag pastes under room and elevated temperatures. Construction and Building Materials, 344, 128113. https://doi.org/10.1016/j.conbuildmat.2022.128113 [Google Scholar]
  3. Celerier, H., Jouin, J., Mathivet, V., Tessier-Doyen, N., & Rossignol, S. (2018). Composition and properties of phosphoric acid-based geopolymers. Journal of Non-Crystalline Solids, 493, 94–98. https://doi.org/10.1016/j.jnoncrysol.2018.04.044 [Google Scholar]
  4. A, S. K., M, M., K, A. K., A, C. G., & R, K. D. (2022). Influence of incinerated biomedical waste ash and waste glass powder on the mechanical and flexural properties of reinforced geopolymer concrete. Australian Journal of Structural Engineering, 23(3), 254–268. https://doi.org/10.1080/13287982.2022.2044613 [Google Scholar]
  5. Hadi, M. N., Zhang, H., & Parkinson, S. (2019). Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability. Journal of Building Engineering, 23, 301–313. https://doi.org/10.1016/j.jobe.2019.02.006 [Google Scholar]
  6. He, P., Cui, J., Wang, M., Fu, S., Yang, H., Sun, C., Duan, X., Yang, Z., Jia, D., & Zhou, Y. (2019). Interplay between storage temperature, medium and leaching kinetics of hazardous wastes in Metakaolin-based geopolymer. Journal of Hazardous Materials, 384, 121377. https://doi.org/10.1016/j.jhazmat.2019.121377 [Google Scholar]
  7. Kastiukas, G., Ruan, S., Liang, S., & Zhou, X. (2020). Development of precast geopolymer concrete via oven and microwave radiation curing with an environmental assessment. Journal of Cleaner Production, 255, 120290. https://doi.org/10.1016/j.jclepro.2020.120290 [Google Scholar]
  8. Kaur, M., Singh, J., & Kaur, M. (2018). Microstructure and strength development of fly ash-based geopolymer mortar: Role of nano-metakaolin. Construction and Building Materials, 190, 672–679. https://doi.org/10.1016/j.conbuildmat.2018.09.157 [Google Scholar]
  9. Rishi, N., & Aggarwal, V. (2023). Experimental investigation of geopolymer concrete along with biomedical and bone China waste at different molarities of sodium hydroxide. Multiscale and Multidisciplinary Modeling Experiments and Design, 6(2), 277–289. https://doi.org/10.1007/s41939-023-00147-y [Google Scholar]
  10. Mehvish, Bilal., Navneet, Singh., Tabasum, Rasool. (2021). A model supported biomedical waste for the enhancement of mechanical properties of concrete. Modeling Earth Systems and Environment, doi: 10.1007/S40808-021-01215-3. [Google Scholar]
  11. Paramjeet, Kaurin., Syed, Imran, Abbas, Shah. (2017). Utilization of waste materials in the development of Geopolymer Concrete: A New Innovation. International Journal of Research. [Google Scholar]
  12. Kailash, Narayan Katare., N. K., Samaiya., Yogesh, Iyer, Murthy. (2023). Experimental Investigations of Binary Blended Concrete Containing Incinerated Biomedical Waste Ash. International Journal of Civil Engineering, doi: 10.14445/23488352/ijce-v10i12p102. [Google Scholar]
  13. M. C., Nataraja., N., Chakravarthy, H. G.., R., S., Shivaprasad., Sujay, Raghavendra, Naganna. (2023). Self-compacting concrete incorporating incinerated biomedical waste ash: a performance assessment. Journal of Engineering and Applied Science, doi: 10.1186/s44147-023-00191-y. [Google Scholar]
  14. Muhammad, Shoaib Iqbal., Qadir, Bux., Afsar, Ali., Saleh, Mamman, Abdullahi., Abdur, Rahman. (2024). Experimental analysis of concrete with partial cement replacement using incinerated hospital waste ash. Budownictwo i Architektura, doi: 10.35784/bud-arch.5880. [Google Scholar]
  15. Shreyash, Tijare. (2022) A Review: To Investigate the Properties of Geopolymer Concrete with Fly Ash in Place of Cement. International Journal For Science Technology And Engineering, doi: 10.22214/ijraset.2022.47548. [Google Scholar]
  16. Siti, Rachmawati., Syafrudin, Syafrudin., Budiyono, Budiyono. (2023). Medical Waste Incineration Ash Waste: Impact On Environmental Health And Its Potential To Be Used For Paving Blocks. Jurnal Kesehatan Masyarakat, doi: 10.15294/kemas.v19i2.44392. [Google Scholar]
  17. Akyıldız, A., Köse, E. T., & Yıldız, A. (2017). Compressive strength and heavy metal leaching of concrete containing medical waste incineration ash. Construction and Building Materials, 138, 326–332. https://doi.org/10.1016/j.conbuildmat.2017.02.017 [Google Scholar]
  18. Rasuli, M. I. (2022). A study on the influence of sodium silicate concentration and SIO2 : NA2O Ratio on the properties of Low-Calcium Fly Ash-Based Alkali-Activated materials cured at ambient condition. Advances in Materials Science and Engineering, 2022, 1–7. https://doi.org/10.1155/2022/7762507. [Google Scholar]
  19. Wang, Y., Cao, Y., Ma, Y., Xiao, S., Hu, J., & Wang, H. (2021). Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives. Journal of Sustainable Cement-Based Materials, 11(4), 239–262. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.