Open Access
| Issue |
E3S Web Conf.
Volume 648, 2025
International Conference on Civil, Environmental and Applied Sciences (ICCEAS 2025)
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 9 | |
| Section | Applied Sciences | |
| DOI | https://doi.org/10.1051/e3sconf/202564803008 | |
| Published online | 08 September 2025 | |
- Khalil, A. A., and G. M. Gad. “Mineral and chemical constitutions of the UAR gypsum raw materials.” Indian Ceramics 16 (1972): 173-177. Cited by reference Khalil, A.A., Tawfik, A., Hegazy, A.A. and El-Shahat, M.F., 2013. Effect of different forms of silica on the physical and mechanical properties of gypsum plaster composites. Materiales de construcción, 63(312), pp.529-537. [Google Scholar]
- Yu Q, HJ Brouwers. Microstructure and mechanical properties of b-hemihydrate produced gypsum: An insight from its hydration process. Construction and Building Materials. (2011); 25: 3149–3157. Cited by reference [7]. [Google Scholar]
- Yıldızel S and Çarbaş S. Mechanical performance comparison of glass and mono fibers added gypsum composites. Challenge Journal Of Structural Mechanics. (2018); (4)1:9-12. Cited by reference [7]. [Google Scholar]
- Al-Ridha, A. S., Abbood, A. A., Elaiwi, E. H., Hussein, H. H., & Dheyab, L. S. (2020, July). Increasing the Setting Time of Local Gypsum (Joss) by the Use of TGP additive. In. IOP Conference Series: Materials Science and Engineering (Vol. 888, No. 1, p. 012078). IOP Publishing. [Google Scholar]
- Al-Chalabi, Saeb F., et al. (Evaluating the individual, dual usage of (TGP) and (SF) additives on improving gypsum characteristics.) ˑMaterials Today: ˑProceedingsˑ62ˑ (2022): 4567-4573. [Google Scholar]
- Al-Ridha SD, Abbood AA, Hussein HH. Improvement of gypsum properties using SF additive. International Journal of Science and Research. 2015;6(8):504-9. [Google Scholar]
- Dhaheer, MS Abo, and H. K. Ammash. Improvement of ordinary and pure gypsum properties by using polyvinyl alcohol (PVA). Int. J. Civ. Eng. Technol 9.9 (2018): 323-334. [Google Scholar]
- Al-Ridha, Ahmed SD, Firas Saeed Abbas, Hamid Abdul Mahdi Faris, Layth Sahib Dheyab, Eng Hameed Zaier Ali, and Eng Mohammed Sabah Mohialdeen. “The influence of chopped copper fibre (CF) on the improvement of pure gypsum by compressive strength.” Journal of Applied Engineering Science 20, no. 2 (2022): 546-551. [Google Scholar]
- Jameel, Mohammed Abid, et al. “Effect of Chopped Carbon Fibre (CCF) on enhancing the compressive strength and density of gypsum plaster.” Materials Today: Proceedings 62 (2022): 4539-4544. [Google Scholar]
- Shubber, Arshad Nadhom, et al. “The Evaluation Effect of Copper Fibre Diameter on Enhancing Compressive Strength of Pure Gypsum.” Journal of Ecological Engineering 24.11 (2023). [Google Scholar]
- W.S.SMITH, Engineered Materials Handbook Vol.1(ASM International,Ohio, 1987) p. 49. Cited by reference[12] [Google Scholar]
- Chand, S. Review carbon fibers for composites. Journal of materials science 35.6 (2000): 1303-1313. [CrossRef] [Google Scholar]
- J. B. DONNET and R. C. BANSAL, CarbonˑFibers (Marcel Dekker,Inc.,New York, 1990).Cited by reference [12]. [Google Scholar]
- ASTM C472-20 (2020), Standard Test Methods for Physical Testing ofˑGypsum, Gypsum Plasters and Gypsum Concrete, ASTM International, West Conshohocken, PA, 2020 [Google Scholar]
- Q. L. Yu and H. J. H. Brouwers, Microstructure and mechanical properties of b-hemihydrate produced gypsum: An insight from its hydration process, Construction and Building Materials, vol. 25, pp.3149-3157, 2011. Cited by reference Sayonara M. M. Pinheiro and Gladis Camarini Characteristics of Gypsum Recycling in Different Cycles IACSIT International Journal of Engineering and Technology, Vol. 7, No. 3, June 2015. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.