EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 649 (2025) E3S Web Conf., 649 (2025) 01011 References
Open Access
Issue
E3S Web Conf.
Volume 649, 2025
2nd International Conference on Materials Sciences and Mechatronics for Sustainable Energy and the Environment (MSMS2E 2025)
Article Number 01011
Number of page(s) 17
DOI https://doi.org/10.1051/e3sconf/202564901011
Published online 10 September 2025
  1. K. El Harti, M. Touil, R. Saadani, M. Rahmoune, Vibration control of tapering E-FGM porous wind turbine blades using piezoelectric materials. Sol. Energy Sustain. Dev. 67-77 (2024). https://doi.org/10.51646/jsesd.v14iSIMSMS2E.402 [Google Scholar]
  2. B. Singh, K. AlHaddad, A. Chandra, A review of active filters for power quality improvement. IEEE Trans. Ind. Electron. 46, 960-971 (1999). https://doi.org/10.1109/41.793345 [Google Scholar]
  3. H. Patel, V. Agarwal, Maximum power point tracking scheme for PV systems operating under partially shaded conditions. IEEE Trans. Ind. Electron. 55, 4 (2008). https://doi.org/10.1109/TIE.2008.917118 [Google Scholar]
  4. F. B. Zakaria Reguieg, B. Ismail, F. Mehedi, Enhancing electrical grid stability through power quality optimization via PV-PO-UPQC: An integrated approach. Int. Conf. Electr. Eng. Autom. Control, (2024). https://doi.org/10.1109/ICEEAC61226.2024.10576557 [Google Scholar]
  5. N. Ech-Cherki, O. Echab, Y. Errami, A. Obbadi, S. Sahnoun, M. Aoutoul, High order sliding mode control for grid integration of photovoltaic systems. Int. J. Appl. Power Eng. 14, 118-126 (2025). https://doi.org/10.11591/ijape.v14.i1.pp118-126 [Google Scholar]
  6. Z. Reguieg, B. Ismail, Enhancing power quality: Integration of series active power filter and PV system for optimal performance. Inter. J. Electronics Electr. Engin. Syst., 7 (2024). (ISSN : 2602-7437) [Google Scholar]
  7. B. Jacob, T. Abraham, N. Prakash, R. Philip, A review of active power filters in power system applications. Int. J. Adv. Res. Electr. Electron. Instrum. Eng. 3, 10253-10261 (2014). [Google Scholar]
  8. J. M. Sadeq, Comparative study of passive, series and shunt active power filters with hybrid filters on nonlinear loads. Near East Univ., Thesis (2014). [Google Scholar]
  9. A. Venkatesh, S. Nalinakshan, S. S. Kiran, Energy transmission control for a grid-connected modern power system nonlinear loads with a series multi-stage transformer voltage reinjection with controlled converters. Int. J. Eng. Trends Technol. 68 (2020). https://doi.org/10.14445/22315381/IJETT-V68I8P217S [Google Scholar]
  10. V. R. Parihar, A. P. Agarkar, K. S. Kalkonde, H. M. Raghuwanshi, M. G. Fuse, D. S. A. Chaturvedi, Series active power filter for power quality improvement. Eng. World, 6, 234-239 (2024). https://doi.org/10.37394/232025.2024.6.25 [Google Scholar]
  11. P. Salmeron, S. P. Litrân, Improvement of the electric power quality using series active and shunt passive filters. IEEE Trans. Power Deliv. 25, 1058-1067 (2010). https://doi.org/10.1109/TPWRD.2009.2034902 [Google Scholar]
  12. B. Deffaf, H. Farid, H. Benbouhenni, S. Medjmadj, N. Debdouche, Synergetic control for three-level voltage source inverter-based shunt active power filter to improve power quality. Energy Rep. 10, 1013-1027 (2023). https://doi.org/10.1016/j.egyr.2023.07.051 [Google Scholar]
  13. Z. Reguieg, B. Ismail, F. Bouhadji, Optimizing power quality: Simulation of UPQC integrated PV with comprehensive reliability and performance analysis. Int. J. Smart Grid 8, (2024). https://doi.org/10.20508/ijsmartgrid.v8i1.333.g338 [Google Scholar]
  14. Y. Qasim, F. R. Tahir, A. N. B. Alsammak, Utilizing UPQC-based PAC-SRF techniques to mitigate power quality issues under non-linear and unbalanced loads. J. Eur. Syst. Autom. 56, 823-831 (2023). https://doi.org/10.18280/JESA.560513 [Google Scholar]
  15. M. Kesler, E. Ozdemir, Synchronous-reference-frame-based control method for UPQC under unbalanced and distorted load conditions. IEEE Trans. Ind. Electron. 58, 3967-3975 (2011). https://doi.org/10.1109/TIE.2010.2100330 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.