Experimental investigation of the impact of misalignment defects on the vibration behavior of drive systems using various coupling types (elastic and rigid) in rotating machinery and power generation equipment

Open Access

Issue		E3S Web Conf. Volume 649, 2025 2^nd International Conference on Materials Sciences and Mechatronics for Sustainable Energy and the Environment (MSMS2E 2025)


Article Number		01015
Number of page(s)		10
DOI		https://doi.org/10.1051/e3sconf/202564901015
Published online		10 September 2025

M.H.M. Ghazali, W. Rahiman, Vibration analysis for machine monitoring and diagnosis: A systematic review. Shock Vib. 2021, 9469318 (2021). https://doi.org/10.1155/2021/9469318 [Google Scholar]
O. Matania, L. Bachar, E. Bechhoefer, J. Bortman, Signal processing for the condition-based maintenance of rotating machines via vibration analysis: A tutorial. Sensors 24, 454 (2024). https://doi.org/10.3390/s24020454 [Google Scholar]
M. Tiboni, C. Remino, R. Bussola, C. Amici, A review on vibration-based condition monitoring of rotating machinery. Appl. Sci. 12, 972 (2022). https://doi.org/10.3390/app12030972 [Google Scholar]
Y. Bao, J. Yao, F. Scarpa, Y. Li, A modified iterative learning control approach for the active suppression of rotor vibration induced by coupled unbalance and misalignment. Chin. J. Mech. Eng. 37, 25 (2024). https://doi.org/10.1186/s10033-024-00994-x [Google Scholar]
H. Wang, D. Xiong, Y. Duan, J. Liu, X. Zhao, Advances in vibration analysis and modeling of large rotating mechanical equipment in mining arena: A review. AIP Adv. 13, 110702 (2023). https://doi.org/10.1063/5.0179885 [Google Scholar]
Q. Ma, K. Wang, H. Liu, Z. Cheng, Influence of shaft combined misalignment on vibration and noise characteristics in a marine centrifugal pump. J. Low Freq. Noise Vib. Act. Control 41, 1286-1306 (2022). https://doi.org/10.1177/14613484221104627 [Google Scholar]
H. Wang, H. Yang, S. Zhao, Y. Fan, R. Dong, Vibration characterization of rolling bearings with compound fault features under multiple interference factors. PLoS One 19, e0297935 (2024). https://doi.org/10.1371/journal.pone.0297935 [Google Scholar]
X. Li, Y. Xu, Z. Chen, Non-linear dynamic response of misaligned spline coupling: Theoretical modeling and experimental investigation. J. Vib. Control 29, 1590-1605 (2022). https://doi.org/10.1177/10775463211067104 [Google Scholar]
ISO 10816-3:2009, Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3 : Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15,000 r/min when measured in situ. Int. Organ. Stand. (2009). [Google Scholar]
D.P. Hujare, M.G. Karnik, Vibration responses of parallel misalignment in Al shaft rotor bearing system with rigid coupling. Mater. Today Proc. 5, 23863-23871 (2018). https://doi.org/10.1016/j.matpr.2018.10.178 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.