EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 653 (2025) E3S Web Conf., 653 (2025) 01002 References
Open Access
Issue
E3S Web Conf.
Volume 653, 2025
The 1st International Conference on Innovative Structure and Resilient City (ISRC 2025)
Article Number 01002
Number of page(s) 4
Section Innovative Structural Systems and Seismic Resilience
DOI https://doi.org/10.1051/e3sconf/202565301002
Published online 20 October 2025
  1. J. Zhang, H. Zhao, K. Chen, G. Fei, X. Li, Y. Wang, Z. Yang, S. Zheng, S. Liu, H. Ding, Dexterous hand towards intelligent manufacturing: A review of technologies, trends, and potential applications. Robot. Comput. Integr. Manuf. 95, 103021 (2025). https://doi.org/10.1016/j.rcim.2025.103021. [Google Scholar]
  2. A.A. Akinwande, M.S. Kumar, V. Romanovski, Mechanical strengthening and micro-mechanical modelling of newly fabricated 7068aluminium/lightweight-high-entropy-alloy as aeromaterial. Mater. Chem. Phys. 309, 128344 (2023). https://doi.org/10.1016/j.matchemphys.2023.128344. [Google Scholar]
  3. S. Rajakumar, C. Muralidharan, V. Balasubramanian, Optimization of the friction-stirwelding process and tool parameters to attain a maximum tensile strength of AA7075–T6 aluminium alloy. J. Eng. Manuf. 224, 1175–1191 (2010). https://doi.org/10.1243/09544054JEM1802. [Google Scholar]
  4. A. Barcellona, G. Buffa, L. Fratini, D. Palmeri, On microstructural phenomena occurring in friction stir welding of aluminium alloys. J. Mater. Process. Technol. 177, 340–343 (2006). https://doi.org/10.1016/j.jmatprotec.2006.03.192. [Google Scholar]
  5. Z. Zhang, W. Zhou, Z. Shi, J. Lin, Investigation of die designs on welding quality and billet material utilisation for multi-container extrusion of wide stiffened aluminium panels. Int. J. Adv. Manuf. Technol. 127(9-10), 4149–4162 (2023). https://doi.org/10.1007/s00170-023-11774-7. [Google Scholar]
  6. B. Liu, V. T. Doan, Y. Garbatov, W. Wu, C. G. Soares, Study on ultimate compressive strength of aluminium-alloy plates and stiffened panels. J. Mar. Sci. Appl. 19, 534–552 (2020). https://doi.org/10.1007/s11804-020-00170-2. [Google Scholar]
  7. E.D.W.S. Putri, T. Triyono, A.R. Prabowo, M. Azka, N. Muhayat, Analyzing defects in one-step double-acting friction stir welded of hollow aluminum panel: influence of travel speed, in Proceedings of the 13th Engineering International Conference on Sustainable Development Through Green Engineering and Technology (EIC 2024), 24 July 2024, Semarang, Indonesia, E3S Web Conf. 576 (2024) 06013. https://doi.org/10.1051/e3sconf/202457606013. [Google Scholar]
  8. S. Xu, J. Ma, Y. Lv, W. Shen, Y. Wu, M. Li, Fatigue strength of welded joints of marine aluminum alloy extrusion stiffened plate considering welding effects. Ocean Eng. 310, 118755 (2024). https://doi.org/10.1016/j.oceaneng.2024.118755. [Google Scholar]
  9. Y.E. Widyantono, Y. Uematsu, I. Ilhamdi, S. Sulardjaka, J. Istiyanto, M. Azka, N. Muhayat, T. Triyono, Comparative analysis of bobbin tool and one-step double-acting tool in friction stir welding of aluminum AA1100. Int. J. Lightweight Mater. Manuf. 8, 577–594 (2025). https://doi.org/10.1016/j.ijlmm.2025.05.002. [Google Scholar]
  10. F. Weng, Y. Liu, Y. Chew, B.Y. Lee, F.L. Ng, G. Bi, Double-side friction stir welding of thick magnesium alloy: microstructure and mechanical properties. Sci. Technol. Weld. Join. 25, (2020). https://doi.org/10.1080/13621718.2019.1706810. [Google Scholar]
  11. G. Oberhausen, D. R. Cooper, Modeling the strength of aluminum extrusion transverse welds using the film theory of solid-state welding. J. Mater. Process. Technol. 324, 118254 (2024). https://doi.org/10.1016/j.jmatprotec.2023.118254. [Google Scholar]
  12. A. Lennon, M. Lunardi, B. Hallam, P. R. Dias, The aluminium demand risk of terawatt photovoltaics for net zero emissions by 2050. Nat. Sustain. 5(4), 357–363 (2022). https://doi.org/10.1038/s41893-021-00838-9. [Google Scholar]
  13. A. Faye, Y. Balcaen, L. Lacroix, J. Alexis, Effect of welding parameters on the microstructure and mechanical properties of the AA6061 aluminium alloy. J. Adv. Join. Process. 3, 100047 (2021). https://doi.org/10.1016/j.jajp.2021.100047. [Google Scholar]
  14. H. Hilmawan, E.D.W.S. Putri, N. Muhayat, Y.H.P. Manurung, I. Ilhamdi, S. Sulardjaka, H. Hendrato, T. Triyono, Effect of Tools Rotational Speed on the Mechanical Properties of Friction Stir Welding. Int. J. Light. Mater. Manuf. 1037, 89–95 (2024). https://doi.org/10.1016/j.ijlmm.2024.02.002. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.