Open Access
| Issue |
E3S Web Conf.
Volume 655, 2025
International Conference on Chemical and Material Engineering in conjunction with the International Symposium on Applied Chemistry (ICCME-ISAC 2025)
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 7 | |
| Section | Organic Chemistry and Polymers | |
| DOI | https://doi.org/10.1051/e3sconf/202565503005 | |
| Published online | 27 October 2025 | |
- S. A. dos Reis, D. V. dos Santos, G. S. Zagui, C. F. P. R. Paschoalato, C. R. Neri, M. T. Martin, H. S. Novo, D. E. C. Mazzeo, M. A. Marin-Morales, M. Nadal, J. Sierra, J. L. Domingo, and S. I. Segura- Muñoz, Sci. Total Environ. 966, (2025) [Google Scholar]
- M. Dunky, Wood Adhesives Based on Natural Resources: A Critical Review, Rev Adhes Adhesives 9, (2021) [Google Scholar]
- E. Kinaci, E. Can, J. Scala, and G. Palmese, Influence of Epoxidizes Cardanol Functionality and Reactivity on Network Formation and Properties, Polymers 12, 1956 (2020) [Google Scholar]
- J. Y. N. Philip, J. Buchweishaija, L. L. Mkayula, and L. Ye, Preparation of Molecularly Imprinted Polymers using Anacardic Acid Monomers Derived from Cashew Nut Shell Liquid, J. Agric. Food Chem. 55, (2007) [Google Scholar]
- E. Budiyati, E. Santoso, and P. M. Budi, in AIP Conf. Proc. (American Institute of Physics Inc., 2023) [Google Scholar]
- F. Cardona and C. Moscou, in Futures Mech. Struct. Mater. - Proc. Aust. Conf. Mech. Struct. Mater., ACMSM (2008), pp. 317–322 [Google Scholar]
- A. Maffezzoli, E. Calò, S. Zurlo, G. Mele, A. Tarzia, and C. Stifani, Compos. Sci. Technol. 64, 839 (2004) [Google Scholar]
- S. B. Gopalakrishnan and T. N. J. Fernando, Processability and Characteristics of Novel Polyurethanes from Cardanol, Res. J. Pharm., Biol. Chem. Sci. 1, (2010) [Google Scholar]
- A. Biswas, C. R. Alves, M. T. S. Trevisan, R. L. E. da Silva, R. F. Furtado, Z. Liu, and H. N. Cheng, Front. Chem. Sci. Eng. 10, 425 (2016) [Google Scholar]
- K. Wazarkar and A. Sabnis, Development of Cardanol-Based Polyol via Click Chemistry and Crosslinking with Melamine Formaldehyde Resin for Coating Applications, J. Renew. Mater. 6, (2018) [Google Scholar]
- L. Y. Mwaikambo and M. P. Ansell, Cure Characteristics of Alkali Catalysed Cashew Nut Shell Liquid-Formaldehyde Resin, Journal of Materials Science 36, (2001) [Google Scholar]
- S. K. Kyei, I. W. Eke, G. Darko, and O. Akaranta, Drying and Adhesive Properties of Novel Surface Coatings Derived from Peanut Skin Extract and Cashew Nutshell Liquid, PRT 52, (2023) [Google Scholar]
- P. S. Parameswaran, B. T. Abraham, and E. T. Thachil, Cardanol-Based Resol Phenolics – a Comparative Study, Progress in Rubber, Plastics and Recycling Technology 26, (2010) [Google Scholar]
- F. Cardona and M. T. B. H. Sultan. BioResources 11, 965 (2015) [Google Scholar]
- E. Papadopoulou and K. Chrissafis, Thermal Study of Phenol-Formaldehyde Resin Modified with Cashew Nut Shell Liquid, Thermochimica Acta 512, (2011) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.