Open Access
| Issue |
E3S Web Conf.
Volume 660, 2025
The 1st International Conference on Green Energy Policy and Digital Society 2025 (1st Green-Digi 2025)
|
|
|---|---|---|
| Article Number | 03006 | |
| Number of page(s) | 7 | |
| Section | Renewable Energy, Circular Economy, and Policy Frameworks | |
| DOI | https://doi.org/10.1051/e3sconf/202566003006 | |
| Published online | 10 November 2025 | |
- J. Zhang dkk., “Dexterous hand towards intelligent manufacturing: A review of technologies, trends, and potential applications,” Robotics and Computer-Integrated Manufacturing, vol. 95, hlm. 103021, 2025, doi: 10.1016/j.rcim.2025.103021. [Google Scholar]
- A. A. Akinwande, M. S. Kumar, dan V. Romanovski, “Mechanical strengthening and micro-mechanical modelling of newly fabricated 7068-aluminium/lightweight-highentropy-alloy as aero-material,” Materials Chemistry and Physics, vol. 309, hlm. 128344, 2023, doi: 10.1016/j.matchemphys.2023.128344. [Google Scholar]
- O. S. Adesina, A. A. Akinwande, O. A. Balogun, A. A. Adediran, O. O. Sanyaolu, dan A. Romanovski, “Statistical Analysis and Optimization of the Experimental Results on Performance of Green Aluminum-7075 Hybrid Composites,” Journal of Composite Science, vol. 793, hlm. 115, 2023, doi: 10.3390/jcs7030115. [Google Scholar]
- R. P. Verma, K. N. Pandey, Á. András, R. Khargotra, dan T. Singh, “Difficulties and redressal in joining of aluminium alloys by GMA and GTA welding: a review,” Journal of Materials Research and Technology, vol. 23, hlm. 2576–2586, 2023, doi: 10.1016/j.jmrt.2023.01.183. [Google Scholar]
- H. Wang, G. Qin, B. Fu, C. Li, dan G. Zhu, “Simulation of thermal-mechanical coupling in Al alloy/steel inertia friction welding,” International Journal of Mechanical Sciences, vol. 285, hlm. 109806, 2025, doi: 10.1016/j.ijmecsci.2024.109806. [Google Scholar]
- J. Yang dkk., “Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review,” Journal of Materials Processing Technology, vol. 301, hlm. 117443, 2022, doi: 10.1016/j.jmatprotec.2021.117443. [Google Scholar]
- H. Hendrato dkk., “Fatigue crack growth and residual stress in simultaneous double-sided friction stir welded aluminum alloy AA6061-T6,” Journal of Advanced Joining Processes, vol. 11, hlm. 100300, 2025, doi: 10.1016/j.jajp.2025.100300. [Google Scholar]
- S. Cha, H. Hou, dan Y. Zhang, “The Influence of the Mechanism of Double-Sided FSW on Microstructure and Mechanical Performance of AZ31 Alloy,” Metals, vol. 11, no. 12, 2021, doi: 10.3390/met11121982. [Google Scholar]
- A. Putra, “The Role of International Human Rights Law in Fights Against Climate Change,” JMH, vol. 28, no. 2, hlm. 153–164, Des 2021, doi: 10.18196/jmh.v28i2.10988. [Google Scholar]
- D. Tan, “Assessing Indonesia’s Environmental Laws Pertaining to the Abatement of Marine Plastic Pollution: A Euphemism?,” JMH, vol. 29, no. 1, hlm. 1–33, Jun 2022, doi: 10.18196/jmh.v29i1.13414. [Google Scholar]
- D. I. Hejazi dan S. E. Mirsalehi, “Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy,” Transactions of Nonferrous Metals Society of China, vol. 26, hlm. 676–683, 2016, doi: 10.1016/S1003-6326(16)64158-4. [Google Scholar]
- Y. Tang dkk., “Effects of tool rotation direction on microstructure and mechanical properties of 6061 aluminum alloy joints by the synergistically double-sided friction stir welding,” Journal of Manufacturing Processes, vol. 126, hlm. 109–123, 2024, doi: 10.1016/j.jmapro.2024.07.067. [Google Scholar]
- M. Karimi Ivanaki, E. Poursaeidi, dan D. Afshari, “Experimental and Numerical Investigation of Single and Double Pass Friction Stir Welding of Dissimilar Aluminum Alloys 6061-T6 and 5083 with the Addition of Al2O3,” Transactions of the Indian Institute of Metals, vol. 78, hlm. 127, 2025, doi: 10.1007/s12666-025-03592-0. [Google Scholar]
- S. Zhu, L. Li, Z. Rong, Y. Sun, dan S. Guan, “Effect of welding position and direction on the interfacial microstructure and mechanical properties of double-pass friction stir lap welded A6061/Q235 joints,” Materials Today Communications, vol. 34, hlm. 105102, 2023, doi: 10.1016/j.mtcomm.2022.105102. [Google Scholar]
- E. D. W. S. Putri, T. Triyono, A. R. Prabowo, M. Azka, dan N. Muhayat, “Analyzing defects in one-step double-acting friction stir welded of hollow aluminum panel: influence of travel speed,” dipresentasikan pada E3S Web of Conferences, 2024, hlm. 06013. doi: 10.1051/e3sconf/202457606013. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.