Open Access
| Issue |
E3S Web Conf.
Volume 666, 2025
5th International Conference on Air Pollution and Environmental Engineering (APEE 2025)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202566601003 | |
| Published online | 19 November 2025 | |
- Han Shuai, Li Heng, Li Mingchao, et al. Intelligent short-term forecasting for mud concentration in CSD dredging construction[J]. Ocean engineering, 2022(5): 1–17. DOI: 10.1016/J.OCEANENG.2022.113151 [Google Scholar]
- Chen Yong, Li Mingchao, Ren Qiubing, et al. Automatic Construction and Uncertainty Analysis of Geological Profiles in Dredging Engineering Based on Multiple-Point Geostatistics[J]. Journal of Waterway, Port, Coastal and Ocean Engineering, 2024(6):0402417. DOI:10.1061/JWPED5.WWENG-2150 [Google Scholar]
- Zahra Zarifianshafei, Chintan Amri. Using Machine Learning of Sensor Data to Estimate the Production of Cutter Suction Dredgers[C]. International Conference on Intelligent Human Computer Interaction, 2024, 244–255. [Google Scholar]
- Jie Yinggang, Wang Xiao, Zeng Jiajia, et al. Research on Active Wave Compensation System Based on Kalman Filter [J]. Computer Engineering and Applications, 2015, 51(21):36–40. [Google Scholar]
- Zhang Hongsheng, Yi Fan, Deng Wusan: Research on the Control Strategy of the Active Cover of the Scraper Head of a Scraper Suction Dredger Based on the DDPG Algorithm [J]. China Harbour Engineering, 2022, 42(9):7–10. [Google Scholar]
- Jiang Huisheng, Cen Haitang, Li Ling, et al. Simulation analysis of root cutting process of corrugated cutter head. International Symposium on Robotics, Artificial Intelligence, and Information Engineering[C], 2022, 124540s. [Google Scholar]
- Tan Qiuting, Fang Hanzhen, Yang Qijin, etc Analysis of clay cutting characteristics using SPH method [J]. Transactions of the Chinese Society of Agricultural Engineering, 2023, 39(19): 49–57. [Google Scholar]
- Jin Xin, Min Shuhui, Liao Kai, etc Research on the Design of Cutting Tools for Deep Pine Operations in Oil Tea Forests [J]. Journal of Agricultural Mechanization Research, 2025, 47(9): 59–66. DOI: 10.13427/j.issn.1003-188X.2025.09.009 [Google Scholar]
- Li Zhangchao, Zhang Gengsheng, Xiao Bo. Underwater cutting experiment and cutting resistance calculation of single draghead tooth and three draghead teeth in dense silt[J]. Port & Waterway Engineering, 2020(S1) : 85–90. DOI: 10.16233/j.cnki.issn1002-4972.20201009.026 [Google Scholar]
- Li Zhangchao, Guo Zhiyong, Zhang Gengsheng, et al. Underwater cutting experiment and cutting resistance calculation of single draghead tooth and three draghead teeth in dense silt [J]. Port & Waterway Engineering, 2022(1):204–208. DOI: 10.16233/j.cnki.issn1002-4972.2022.01.001 [Google Scholar]
- Jiao Peng, Chen Xu. Numerical study on characteristics of clay cutting of drag head based on CFD-DEM [J]. Port & Waterway Engineering, 2025(5): 183–189. DOI: 10.16233/j.cnki.issn1002-4972.20250507.011 [Google Scholar]
- Zhang Gengsheng. Laboratory test study on the production of dredged hard clay[J]. Port & Waterway Engineering, 2018(7):47–50. DOI:10.16233/j.cnki.issn1002-4972.20180702.025 [Google Scholar]
- Guo Xiliang, Yin Songyu, Wang Liwei, et al. Remolding and Characteristic Analysis of Compact Clay[J]. Port & Waterway Engineering, 2023(s2): 77–80. DOI: 10.16233/j.cnki.issn1002-4972.20230208.008 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.