EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 672 (2025) E3S Web Conf., 672 (2025) 02025 References
Open Access
Issue
E3S Web Conf.
Volume 672, 2025
The 17th ROOMVENT Conference (ROOMVENT 2024)
Article Number 02025
Number of page(s) 8
Section Modelling & Measuring: Modelling & Measuring
DOI https://doi.org/10.1051/e3sconf/202567202025
Published online 05 December 2025
  1. H. Künzel, « Simultaneous heat and moisture transport in building components. One- and two- dimensional calculation using simple parameters », Fraunhofer IBP, 1995. [Google Scholar]
  2. « NF EN 15026 », Afnor EDITIONS, 2023. [Google Scholar]
  3. F. Bennai, « Étude des mécanismes de transferts couplés de chaleur et d’humidité dans les matériaux poreux de construction en régime insaturé », PhD thesis, Univ. La Rochelle, 2017. [Google Scholar]
  4. B. Jiang, J. Tan, L. Wan, L. Wang, R. Lu, et M. Jiang, « Hygrothermal parameters measurement and building performance study of modified rammed earth materials », Energy Build., vol. 299, p. 113609, 2023. [Google Scholar]
  5. F. Mnasri, « Étude du transfert de chaleur et de masse dans les milieux complexes : application aux milieux fibreux et à l’isolation des bâtiments », PhD thesis, Univ de Lorraine, 2016. [Google Scholar]
  6. I. Oubrahim, « Fiabilisation des approches théoriques pour la caractérisation des matériaux et la modélisation hygrothermique des enveloppes du bâtiment », PhD thesis, Univ La Rochelle, 2022. [Google Scholar]
  7. L. Soudani et al., « Assessment of the validity of some common assumptions in hygrothermal modeling of earth based materials », Energy Build., vol. 116, p. 498‑511, 2016. [Google Scholar]
  8. T. Alioua, B. Agoudjil, N. Chennouf, A. Boudenne, et K. Benzarti, « Investigation on heat and moisture transfer in bio-based building wall with consideration of the hysteresis effect », Build. Environ., vol. 163, p. 106333, 2019. [Google Scholar]
  9. A. Challansonnex, « Transferts couplés chaleur/masse dans les matériaux de construction biosourcés : investigation expérimentale et théorique du non-équilibre local », PhD thesis, Université Paris Saclay, 2019. [Google Scholar]
  10. J. Langmans, A. Nicolai, R. Klein, et S. Roels, « A quasi-steady state implementation of air convection in a transient heat and moisture building component model », Build. Environ., vol. 58, p. 208‑218, 2012. [Google Scholar]
  11. T. Kalamees et J. Kurnitski, « Moisture Convection Performance of External Walls and Roofs », J. Build. Phys. - J BUILD PHYS, vol. 33, p. 225‑247, 2010. [Google Scholar]
  12. D. Bastien et M. Winther-Gaasvig, « Influence of driving rain and vapour diffusion on the hygrothermal performance of a hygroscopic and permeable building envelope », Energy, vol. 164, p. 288‑297, 2018. [Google Scholar]
  13. Künzel, Hartwig M, Zirkelbach, Daniel, et Schafaczek, Beate, « Modeling the Effect of Air Leakage in Hygrothermal Envelope SImulation | Building Research Information Knowledgebase », in National Institute of Building Science 2012 - Proceedings BEST3 Conference Atlanta, 2012. [Google Scholar]
  14. F. Antretter et S. Pallin, « HAMT extension for EnergyPlus encompasses moisture sources due to air leakage », 2019. https://www.osti.gov/servlets/purl/1494004. [Google Scholar]
  15. A. Karagiozis et H. Kuenzel, « The Effect of Air Cavity Convection on the Wetting and Drying Behavior of Wood-Frame Walls Using a Multi-Physics Approach », J. ASTM Int., vol. 6, no 10, p. JAI101455, 2009. [Google Scholar]
  16. L. Wang et H. Ge, « Effect of air leakage on the hygrothermal performance of highly insulated wood frame walls: Comparison of air leakage modelling methods », Build. Environ., vol. 123, p. 363‑377, 2017. [Google Scholar]
  17. « Mathis: technical guide », https://gitlab.com/CSTB/mathis/-/tree/master/manuals, 2020. https://gitlab.com/CSTB/mathis/-/tree/master [Google Scholar]
  18. F. Demouge, N. LeRoux, et X. Faure, Numerical validation for natural ventilation design. 2011. 32nd AIVC Congress, Brussels [Google Scholar]
  19. F. Demouge et X. Faure, « Natural Ventilation Design For Low-rise Buildings: Comparison Between A Nodal Model And Wind Tunnel Tests », Building Simulation Conference, 2013, Chambéry [Google Scholar]
  20. T. Clerc et F. Demouge, « Evaluation of the Performance of the Thermal and Aeraulic Building Simulation Software MATHIS with the BESTest Method ». CSTB, EN-CAPE 16.148 R-V0, 2016. [Google Scholar]
  21. C. Xu, S. Li, et K. Zou, « Study of heat and moisture transfer in internal and external wall insulation configurations », J. Build. Eng., vol. 24, p. 100724, 2019. [Google Scholar]
  22. C.-E. Hagentoft et al., « Assessment method of numerical prediction models for combined heat, air and moisture transfer in building components: benchmarks for one-dimensional cases », J. Therm. Envel. Build. Sci., vol. 27, no 4, p. 327‑352, 2004. [Google Scholar]
  23. T. Z. Desta, J. Langmans, et S. Roels, « Experimental data set for validation of heat, air and moisture transport models of building envelopes », Build. Environ., vol. 46, no 5, p. 1038‑1046, 2011. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.