Open Access
| Issue |
E3S Web Conf.
Volume 674, 2025
The 14th Engineering International Conference “Achieving Sustainability through Digital Transformation and Technology Development” (EIC 2025)
|
|
|---|---|---|
| Article Number | 06010 | |
| Number of page(s) | 7 | |
| Section | Sustainable Materials and Green Chemistry | |
| DOI | https://doi.org/10.1051/e3sconf/202567406010 | |
| Published online | 11 December 2025 | |
- H. Gao, Y. Zhu, L. Mao, F. Wang, X. Luo, Y. Liu, Y. Luyyy, Z. Pan, J. Geyyy, W. Shen, Y. Zheng, L. Xuyyy, L. Wang, W. Xuyyy, H. Wuyyy, S. Yuyyy, Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure. Nat. Commun. 7, 12920 (2016). https://doi.org/10.1038/ncomms12920 [Google Scholar]
- T.B. Kumar, N. Balaji, J. Esakiappan, Intensifying the mechanical properties of IS-4454/1981 spring steel material. Asian J. Res. Soc. Sci. Humanit. 6(12), 681 (2016). https://doi.org/10.5958/2249-7315.2016.01320.4 [Google Scholar]
- R.S.T. Saini, S. Chandramohan, S. Sujatha, H. Kumar, Design of bypass rotary vane magnetorheological damper for prosthetic knee application. J. Intell. Mater. Syst. Struct. 32(9), 931-942 (2020) https://doi.org/10.1177/1045389x20942577 [Google Scholar]
- D.A. Boone, S.K. Coleman, Mechanical properties required for lower-limb prosthetic pylons. Prosthet. Orthot. Int. 43, 421-430 (2019) [Google Scholar]
- K. Satynarayana, K. Rajkiran, K.S. Kiran, Study and optimisation of process parameter in turning of EN 45 - spring steel material under dry and MQL conditions. E3S Web Conf. 184, 01051 (2020). https://doi.org/10.1051/e3sconf/202018401051 [Google Scholar]
- J. Singh, A. Verma, Experimental evaluation of mechanical behavior of SK5 spring steel under cyclic loading. Mater. Today Proc. 45, 1123-1130 (2021) [Google Scholar]
- R. Karthik, S. Manikandan, Fatigue characteristics of EN45 and SK5 spring steels under variable amplitude loading. J. Mater. Res. Technol. 18, 2571-2581 (2022) [Google Scholar]
- K. Tanaka, Y. Mutoh, S. Sakoda, Effect of contact materials on fretting fatigue in a spring steel. Trans. Jpn. Soc. Mech. Eng. A 51(464), 1200-1207 (1985). https://doi.org/10.1299/kikaia.51.1200 [Google Scholar]
- A.J. Teo, A. Mishra, I. Park, Y. Kim, W. Park, Y. Yoon, Polymeric biomaterials for medical implants and devices. ACS Biomater. Sci. Eng. 2(4), 454-472 (2016). https://doi.org/10.1021/acsbiomaterials.5b00429 [Google Scholar]
- Z. Chen, H. Wu, Structural and material considerations for transtibial prosthesis design. J. Rehabil. Res. Dev. 54, 112-124 (2017) [Google Scholar]
- H. Zhao, K. O'Brien, S. Liyyy, R.F. Shepherd, Optoelectronically innervated soft prosthetic hand via stretchable optical waveguides. Sci. Robot. 1(1), aai7529 (2016). https://doi.org/10.1126/scirobotics.aai7529 [Google Scholar]
- H. Hazimi, U. Ubaidillah, R. Alnursyah, H. Nursya'bani, B.W. Lenggana, Wibowo, Improvement of space tube frame for formula student vehicle. In: U. Sabino, F. Imaduddin, A. Prabowo (eds), Proc. 6th Int. Conf. Exhib. Sustainable Energy Adv. Mater., Lecture Notes in Mechanical Engineering, Springer, Singapore, (2020).https://doi.org/10.1007/978-981-15-4481-170 [Google Scholar]
- U. Ubaidillah, B.W. Lenggana, L. Son, F. Imaduddin, P.J. Widodo, H. Harjana, R.I. Doewes, A new magnetorheological fluids damper for unmanned aerial vehicles. J. Adv. Res. Fluid Mech. Therm. Sci. 73(1), 35-45 (2020). https://doi.org/10.37934/arfmts.73.L3545 [Google Scholar]
- E. Buitrago, A. Pérez, Finite element analysis of prosthetic pylons under dynamic load. Biomech. Model. Mechanobiol. 19, 1567-1579 (2020) [Google Scholar]
- M. Al-Khazraji, H. Mutar, Influence of heat treatment on hardness and tensile properties of high-carbon spring steel. IOP Mater. Sci. Eng. 870, 012085 (2020) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.