EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 680 (2025) E3S Web Conf., 680 (2025) 00148 References
Open Access
Issue
E3S Web Conf.
Volume 680, 2025
The 4th International Conference on Energy and Green Computing (ICEGC’2025)
Article Number 00148
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202568000148
Published online 19 December 2025
  1. Y. El Alami, E. Baghaz, R. Nasrin, M. Al-Damook, R. Bendaoud, T. Bouragba, M. Melhaoui, M. Benhmida, Up-to-Date Review on Flat-Plate Solar Hybrid Photovoltaic Thermal Systems: Absorber Designs and Fabrication Materials, Int. J. Energy Res. 2025 (2025) 5547555. https://doi.org/10.1155/er/5547555. [Google Scholar]
  2. Y. El Alami, Y. Bannour, F. Ouerradi, H. Chetnouf, A. Ghennioui, B. Benhala, E. Baghaz, C. Hajjaj, Experimental and numerical evaluation of the performance of a photovoltaic panel in a semi-arid climate, in: 2025 5th Int. Conf. Innov. Res. Appl. Sci. Eng. Technol. IRASET, IEEE, Fez, Morocco, 2025: pp. 1–6. https://doi.org/10.1109/IRASET64571.2025.11008049. [Google Scholar]
  3. A. Bria, B. Raillani, D. Chaatouf, M. Salhi, S. Amraqui, A. Mezrhab, Effect of PCM thickness on the performance of the finned PV/PCM system, Mater. Today Proc. 72 (2023) 3617–3625. https://doi.org/10.1016/j.matpr.2022.08.409. [Google Scholar]
  4. A.R. Abdulmunem, P. Mohd Samin, H. Abdul Rahman, H.A. Hussien, I. Izmi Mazali, H. Ghazali, Numerical and experimental analysis of the tilt angle’s effects on the characteristics of the melting process of PCM- based as PV cell’s backside heat sink, Renew. Energy 173 (2021) 520–530. https://doi.org/10.1016/j.renene.2021.04.014. [Google Scholar]
  5. H.M. Maghrabie, A.S.A. Mohamed, A.M. Fahmy, A.A. Abdel Samee, Performance enhancement of PV panels using phase change material (PCM): An experimental implementation, Case Stud. Therm. Eng. 42 (2023) 102741. https://doi.org/10.1016/j.csite.2023.102741. [Google Scholar]
  6. E.H. Amalu, O.A. Fabunmi, Thermal control of crystalline silicon photovoltaic (c-Si PV) module using Docosane phase change material (PCM) for improved performance, Sol. Energy 234 (2022) 203–221. https://doi.org/10.1016/j.solener.2022.02.001. [Google Scholar]
  7. S. Nižetić, M. Jurčević, D. Čoko, M. Arıcı, A novel and effective passive cooling strategy for photovoltaic panel, Renew. Sustain. Energy Rev. 145 (2021) 111164. https://doi.org/10.1016/j.rser.2021.111164. [Google Scholar]
  8. Akshayveer, A. Kumar, A.P. Singh, O.P. Singh, Effect of novel PCM encapsulation designs on electrical and thermal performance of a hybrid photovoltaic solar panel, Sol. Energy 205 (2020) 320–333. https://doi.org/10.1016/j.solener.2020.05.062. [Google Scholar]
  9. T. Klemm, A. Hassabou, A. Abdallah, O. Andersen, Thermal energy storage with phase change materials to increase the efficiency of solar photovoltaic modules, Energy Procedia 135 (2017) 193–202. https://doi.org/10.1016/j.egypro.2017.09.502. [Google Scholar]
  10. P. Michael Joseph Stalin, K.S. Prasad, K.P. Kumar, G. Hemadri, M. Rajesh, K.P. Kumar, Performance improvement of solar PV through the thermal management using a nano-PCM, Mater. Today Proc. 50 (2022) 1553–1558. https://doi.org/10.1016/j.matpr.2021.09.111. [Google Scholar]
  11. Y. Bannour, Y. El Alami, R. Nasrin, N.E. Moussaoui, B. Elhadi, A. Faiz, Numerical Optimization of Fin Configurations in Phase Change Material Systems for Improving Solar Panel Cooling and Electrical Efficiency, Energy Storage 7 (2025) e70241. https://doi.org/10.1002/est2.70241. [Google Scholar]
  12. M. Abd El-Hamid, G. Wei, L. Cui, C. Xu, X. Du, Three-dimensional heat transfer studies of glazed and unglazed Photovoltaic/Thermal systems embedded with phase change materials, Appl. Therm. Eng. 208 (2022) 118222. https://doi.org/10.1016/j.applthermaleng.2022.118222. [Google Scholar]
  13. A. Kazemian, A. Salari, A. Hakkaki-Fard, T. Ma, Numerical investigation and parametric analysis of a photovoltaic thermal system integrated with phase change material, Appl. Energy 238 (2019) 734–746. https://doi.org/10.1016/j.apenergy.2019.01.103. [Google Scholar]
  14. M.A. Alnakeeb, M. Shatarah, M.K. Hamza, M.A.A. Salam, H.M. Teamah, The effect of fin geometry on the thermal performance of a conical shell double tube latent storage unit, J. Energy Storage 94 (2024) 112471. https://doi.org/10.1016/j.est.2024.112471. [Google Scholar]
  15. M.A. Alnakeeb, M.A. Abdel Salam, M.A. Hassab, W.M. El-Maghlany, Influence of trapezoidal tube parameters on electrical and thermal performance of hybrid photovoltaic solar panels integrated with phase change materials, Case Stud. Therm. Eng. 65 (2025) 105641. https://doi.org/10.1016/j.csite.2024.105641. [Google Scholar]
  16. M. Hosseinzadeh, A. Salari, M. Sardarabadi, M. Passandideh-Fard, Optimization and parametric analysis of a nanofluid based photovoltaic thermal system: 3D numerical model with experimental validation, Energy Convers. Manag. 160 (2018) 93–108. https://doi.org/10.1016/j.enconman.2018.01.006. [Google Scholar]
  17. N. Narjabadifam, S. Salemi, M. Adib, S. Bozorgmehri, Techno-economic assessment of a photovoltaic module integrated withehri, Techno-economic assessment of a photovoltaic module integrated with a two-layer phase change material unit, J. Energy Storage 51 (2022) 104243. https://doi.org/10.1016/j.est.2022.104243. [Google Scholar]
  18. A.S. Joshi, A. Tiwari, Energy and exergy efficiencies of a hybrid photovoltaic–thermal (PV/T) air collector, Renew. Energy 32 (2007) 2223–2241. https://doi.org/10.1016/j.renene.2006.11.013. [Google Scholar]
  19. S. Khanna, K.S. Reddy, T.K. Mallick, Performance analysis of tilted photovoltaic system integrated with phase change material under varying operating conditions, Energy 133 (2017) 887–899. https://doi.org/10.1016/j.energy.2017.05.150. [Google Scholar]
  20. A.D. Brent, V.R. Voller, K.J. Reid, ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL, Numer. Heat Transf. 13 (1988) 297–318. https://doi.org/10.1080/10407788808913615. [Google Scholar]
  21. J. Pu, J. Du, B. Zhang, F. Rong, F. Jiao, Y. Hong, Thermal management enhancement of photovoltaic panels using phase change material heat sinks with various T-shaped fins, Case Stud. Therm. Eng. 61 (2024) 104991. https://doi.org/10.1016/j.csite.2024.104991. [Google Scholar]
  22. M. Sardarabadi, M. Passandideh-Fard, Experimental and numerical study of metal-oxides/water nanofluids as coolant in photovoltaic thermal systems (PVT), Sol. Energy Mater. Sol. Cells 157 (2016) 533–542. https://doi.org/10.1016/j.solmat.2016.07.008. [Google Scholar]
  23. Y.E. Alami, H. Dahmani, F. Ouerradi, B. Zohal, R. Bendaoud, E. Baghaz, Impact of Heat Exchanger Materials on the Performance of Solar Hybrid Photovoltaic Thermal (PVT) Systems: 3D Analysis, in: B. Hajji, A. Gagliano, A. Mellit, A. Rabhi, M. Calì (Eds.), Proc. 4th Int. Conf. Electron. Eng. Renew. Energy Syst. - Vol. 2, Springer Nature, Singapore, 2025: pp. 609–619. https://doi.org/10.1007/978-981-97-9975-6_58. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.