Open Access
| Issue |
E3S Web Conf.
Volume 692, 2026
3rd International Conference on Intelligent and Sustainable Power and Energy Systems (ISPES 2025)
|
|
|---|---|---|
| Article Number | 04008 | |
| Number of page(s) | 10 | |
| Section | Materials Science | |
| DOI | https://doi.org/10.1051/e3sconf/202669204008 | |
| Published online | 04 February 2026 | |
- S. Suresh, Mechanical and wear characteristics of aluminium alloy 7075 reinforced with nano-aluminium oxide/magnesium particles by stir casting method. Mater. Today: Proc. (2020). https://doi.org/10.1016/j.matpr.2020.08.176 [Google Scholar]
- K. Singh et al., The mechanical properties of these alloys in association with different reinforcements. J. Phys.: Mater. (2021). https://doi.org/10.1088/2631-6331/abddc8 [Google Scholar]
- P. R. Jadhav et al., Mechanical behavior and fractography of graphite and boron carbide particulates reinforced A356 alloy hybrid metal matrix composites. J. Mater. Eng. Perform. (2020). https://doi.org/10.1007/s42114-020-00143-7 [Google Scholar]
- B. Jayendra et al., Mechanical characterization of stir cast Al-7075/B₄C/graphite reinforced hybrid metal matrix composites. Mater. Today: Proc. (2020). https://doi.org/10.1016/j.matpr.2020.01.057 [Google Scholar]
- R. Karunanithi et al., Synthesis and characterization of TiO₂ dispersed Al 7075 micro- and nanocomposite. Adv. Mater. Res. 984–985, 313–318 (2014). https://doi.org/10.4028/www.scientific.net/AMR.984-985.313 [Google Scholar]
- S. Y. Fu et al., Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate polymer composites. Compos. Part B 39, 933–961 (2008). https://doi.org/10.1016/j.compositesb.2008.01.002 [Google Scholar]
- V. Vignesh Kumar et al., Microstructural characterization and mechanical properties of Al7075/BN metal matrix composites. Mater. Res. Express 6, 0850e2 (2019). https://doi.org/10.1088/2053-1591/ab07e2 [Google Scholar]
- N. Ramadossa et al., Synthesis of B₄C and BN reinforced Al7075 hybrid composites using stir casting method. J. Mater. Res. Technol. 9, 5033–5042 (2020). https://doi.org/10.1016/j.jmrt.2020.03.043 [Google Scholar]
- K. Srivallirani et al., Fabrication and mechanical characterization of Al 7050/TiO₂/BN hybrid metal matrix composites. Mater. Today: Proc. (2020). https://doi.org/10.1016/j.matpr.2020.06.386 [Google Scholar]
- G. S. Pradeep Kumar et al., Mechanical properties of Al7075–SiC–TiO₂ hybrid metal matrix composite. In Adv. Manuf. Eng. 391–403 (2018). https://doi.org/10.1007/978-3-319-76276-0_30 [Google Scholar]
- S. V. Alagarsamy et al., Synthesis, microstructure and properties of TiO₂ reinforced AA7075 matrix composites via stir casting route. Mater. Res. Express 6, 1050c6 (2019). https://doi.org/10.1088/2053-1591/ab1d3b [Google Scholar]
- S. Hariharan et al., A review of aluminum (Al7075) SiC & TiO₂ with stir casting. Int. J. Innov. Res. Sci. Eng. Technol. 9, 1060–1067 (2020). https://doi.org/10.15680/IJIRSET.2020.0902096 [Google Scholar]
- C. Antony Vasantha Kumar et al., Influence of rutile (TiO₂) content on wear and microhardness characteristics. Trans. Nonferrous Met. Soc. China 26, 2931–2940 (2016). https://doi.org/10.1016/S1003-6326(16)64089-X [Google Scholar]
- G. T. Danappa et al., Dry sliding wear behaviour of Al7075/Gr/nano-TiO₂ MMC using RSM. Mater. Today: Proc. (2020). https://doi.org/10.1016/j.matpr.2020.08.736 [Google Scholar]
- N. M. Rahma et al., Investigation and improvement of the properties of 7075 Al/T6 alloy using TiO₂ nanomaterials. IOP Conf. Ser.: Mater. Sci. Eng. 454, 012144 (2018). https://doi.org/10.1088/1757-899X/454/1/012144 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.