Open Access
| Issue |
E3S Web Conf.
Volume 693, 2026
International Process Metallurgy Conference (IPMC 2025)
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 7 | |
| Section | Physical Metallurgy and Corrosion | |
| DOI | https://doi.org/10.1051/e3sconf/202669304005 | |
| Published online | 09 February 2026 | |
- J. Xu, X. Kong, M. Chen, Q. Wang, F. Wang, High-entropy FeNiCoCr alloys with improved mechanical and tribological properties by tailoring composition and controlling oxidation. J. Mater. Sci. Technol. 82, 207–213 (2021). https://doi.org/10.1016/j.jmst.2020.12.042 [Google Scholar]
- J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes. Adv. Eng. Mater. 6, 299–303 (2004). https://doi.org/10.1002/adem.200300567 [CrossRef] [Google Scholar]
- Z. Li, S. Zhao, R.O. Ritchie, M.A. Meyers, Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys. Prog. Mater. Sci. 102, 296–345 (2019). https://doi.org/10.1016/j.pmatsci.2018.12.003 [Google Scholar]
- E.A. Basuki, N. Adrianto, R. Triastomo, A.A. Korda, T.L. Achmad et al., Isothermal oxidation behavior of ferritic oxide dispersion strengthened alloy at high temperatures. J. Eng. Technol. Sci. 54, 370–382 (2022). https://doi.org/10.5614/j.eng.technol.sci.2022.54.2.10 [Google Scholar]
- T.L. Achmad, W. Fu, H. Chen, C. Zhang, Z.-G. Yang, Co-based alloys design based on first-principles calculations: Influence of transition metal and rare-earth alloying element on stacking fault energy. AIP Conf. Proc. 1805, 060004 (2017). https://doi.org/10.1063/1.4974440 [Google Scholar]
- C. Wen, Y. Zhang, C. Wang, Machine learning assisted design of high entropy alloys with desired property. Acta Mater. 170, 109–117 (2019). https://doi.org/10.1016/j.actamat.2019.03.010 [Google Scholar]
- O. Elgack et al., Molecular dynamics simulation and machine learning-based analysis for predicting tensile properties of high-entropy FeNiCrCoCu alloys. J. Mater. Res. Technol. 25, 5575–5585 (2023). https://doi.org/10.1016/j.jmrt.2023.07.023 [Google Scholar]
- T.L. Achmad, G.F. Ritonga, E.I. Pane, L.H. Sebastian, Unlocking High-Entropy Alloys FeNiCrCoCu Design: Stacking Fault Energy Modeling with First-Principles DFT, Molecular Dynamics, Thermodynamics, and Machine Learning. J. Phys.: Conf. Ser. 2980, 012037 (2025). https://doi.org/10.1088/1742-6596/2980/1/012037 [Google Scholar]
- D. Farkas, A. Caro, Model interatomic potentials for Fe-Ni-Cr-Co-Al high-entropy alloys. J. Mater. Res. 35, 3031–3040 (2020). https://doi.org/10.1557/jmr.2020.294 [Google Scholar]
- J. Liu, Molecular dynamic study of temperature dependence of mechanical properties and plastic inception of CoCrCuFeNi high-entropy alloy. Phys. Lett. A 384, 126516 (2020). https://doi.org/10.1016/j.physleta.2020.126516 [Google Scholar]
- H. Liu et al., Molecular Dynamics Simulation of the Dynamic Mechanical Behavior of FeNiCrMn High-Entropy Alloy. Nanomaterials 15, 80624 (2025). https://doi.org/10.3390/nano15080624 [Google Scholar]
- P. Wu, K. Gan, D. Yan, Z. Li, The temperature dependence of deformation behaviors in high‐entropy alloys: A review. Metals 11, 2005 (2021). https://doi.org/10.3390/met11122005 [Google Scholar]
- X. Liang, C. Wang, C. Zhang, C.F. Cheung, Physical-metallurgical properties and micro-milling machinability evaluation of high entropy alloy FeCoNiCrAlx. J. Mater. Res. Technol. 21, 3285–3300 (2022). https://doi.org/10.1016/j.jmrt.2022.10.123 [Google Scholar]
- J. Jiang et al., Microstructural evolution and mechanical properties of AlxCoCrFeNi high-entropy alloys under uniaxial tension: A molecular dynamics simulations study. Mater. Today Commun. 28 (2021). https://doi.org/10.1016/j.mtcomm.2021.102525 [Google Scholar]
- Y.M. Zhao, J.Y. Zhang, P.K. Liaw, T. Yang, Machine Learning-Based Computational Design Methods for High-Entropy Alloys. High Entropy Alloys & Mater. 3, 41–100 (2025). https://doi.org/10.1007/s44210-025-00055-5 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.