Open Access
| Issue |
E3S Web Conf.
Volume 697, 2026
The 5th International Conference on Renewable & Sustainable Energies and Green Processes (RSEGP2025)
|
|
|---|---|---|
| Article Number | 00010 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202669700010 | |
| Published online | 13 March 2026 | |
- A. P. Bender and P. Bilotta, "Circular Economy and Urban Mining: Resource Efficiency in the Construction Sector for Sustainable Cities," in Sustainable Cities and Communities, edited by W. Leal Filho, A. Marisa Azul, L. Brandli, P. Gökcin Özuyar, and T. Wall (Springer, Cham, 2020). https://doi.org/10.1007/978-3-319-95717-3 40 [Google Scholar]
- A. Lennon, M. Lunardi, B. Hallam, et al, "The aluminium demand risk of terawatt photovoltaics for net zero emissions by 2050," Nat. Sustain. 5, 357–363 (2022). https://doi.org/10.1038/s41893-021-00838-9 [Google Scholar]
- M. Niero and S. I. Olsen, "Circular economy: To be or not to be in a closed product loop? A life cycle assessment of aluminium cans with inclusion of alloying elements," Resour. Conserv. Recycl. 114, 18–31 (2016). https://doi.org/10.1016/j.resconrec.2016.06.023 [Google Scholar]
- G. Liu and D. B. Müller, "Addressing sustainability in the aluminum industry: A critical review of life cycle assessments," J. Clean. Prod. 35, 108–117 (2012). https://doi.org/10.1016/j.jclepro.2012.05.030 [Google Scholar]
- M. Niero, A. J. Negrelli, S. B. Hoffmeyer, S. I. Olsen, and M. Birkved, "Closing the loop for aluminum cans: Life cycle assessment of progression in Cradle-to-Cradle certification levels," J. Clean. Prod. 126, 352–362 (2016). https://doi.org/10.1016/j.jclepro.2016.02.122 [Google Scholar]
- D. Florez-Orrego, D. Dardor, R. Germanier, M. Margni, and F. Maréchal, "A systemic study for decarbonizing secondary aluminium production via waste heat recovery, carbon management and renewable energy integration," Energy Convers. Manag. 341, 120021 (2025). https://doi.org/10.1016/j.enconman.2025.120021 [Google Scholar]
- G. Daurer, S. Schwarz, M. Demuth, C. Gaber, and C. Hochenauer, "On the use of hydrogen in oxy-fuel glass melting furnaces: An extensive numerical study of the fuel switching effects based on coupled CFD simulations," Fuel 380, 133576 (2025). https://doi.org/10.1016/j.fuel.2024.133576 [Google Scholar]
- M. Zhang, K. Zhou, T. Saunders, G. Wang, K. Wesling, J. Liu, and H. Yan, "Low-cost small-scale recycling aluminium cans for energy conservation and environmental sustainability," Environ. Technol. 46, 4575–4582 (2025). https://doi.org/10.1080/09593330.2025.2509994 [Google Scholar]
- Y. Xing, Z. Luo, H. Li, X. Wang, M. Kou, S. Wu, Z. Zou, and H. Zhou, "Modelling in-furnace phenomena in a hydrogen-rich low-carbon reduction smelting furnace: Influence of blast parameters of hydrogen-rich gas," Appl. Therm. Eng. 273, 126494 (2025). https://doi.org/10.1016/j.applthermaleng.2025.126494 [Google Scholar]
- L. F. Ezzahra, B. Abdallah, A. Senda, and M. Chrigui, "Effects of Swirl Number on the Performance of Combustion and Product Mixing of Coal Pulverized Burner," in 2019 10th International Renewable Energy Congress (IREC) (IEEE, Sousse, Tunisia, 2019), pp. 1–6. https://doi.org/10.1109/IREC.2019.8754619 [Google Scholar]
- L. F. Ezzahra, A. Senda, and M. Chrigui, "CFD Study of a Pulverized Coal Boiler," in Advances in Mechanical Engineering and Mechanics, CoTuMe 2018 (Springer, Cham, 2019), pp. 257–264. https://doi.org/10.1007/978-3-030-19781-031 [Google Scholar]
- L. F. Ezzahra, A. Bouabidi, S. Aguerbi, S. Amsini, and M. Chrigui, "Full-scale CFD study of swirl number effect on particle and flow behavior in interaction with combustion dynamics inside coal pulverized burner," Heat Transf. Res. 54, 79 (2023) https://doi.org/10.1615/HeatTransRes.2023044993 [Google Scholar]
- Turns, Stephen. R., & Haworth, D. C. (2021). An introduction to combustion: Concepts and applications (4th ed.). McGraw-Hill [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.