Open Access
| Issue |
E3S Web Conf.
Volume 729, 2026
1st Sustainable Power, Energy, Transportation, and Materials Conference (SPETM 2026)
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 6 | |
| Section | Materials Science, Nanotechnology & Smart Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202672903003 | |
| Published online | 31 July 2026 | |
- B. C. Kandpal, J. Kumar, and H. Singh, Manufacturing and Technological Challenges in Stir Casting of Metal Matrix Composites-A Review. Mater. Today Proc. 5, 5 (2018). [Google Scholar]
- V. Bharath, M. Nagaral, V. Auradi, and S. A. Kori, Preparation of 6061Al-Al 2 O 3 MMC, s by Stir Casting and Evaluation of Mechanical and Wear Properties. in Procedia Materials Science. 6, 1658 (2014). [Google Scholar]
- K. V. Prasad and K. R. Jayadevan, Simulation of Stirring in Stir Casting. Procedia Technol. 24, 356 (2016). [Google Scholar]
- S. Ravindran, N. Mani, S. Balaji, M. Abhijith, and K. Surendaran, Mechanical behaviour of aluminium hybrid metal matrix composites-A review. Mater. Today Proc. 16, 1020 (2019). [Google Scholar]
- B. C. Kandpal, J. Kumar, and H. Singh, Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting. in Materials Today: Proceedings. 4, 2783 (2017). [Google Scholar]
- Z. Yiming, Z. Yinan, B. Chengsi, and G. Lihe, The Discovery of Magnesioferrite from Au (Fe, Cu) Magnesian Skarn Deposits and Study of the Magnesioferrite-Magnesiomagnetite Series. Acta Geologica Sinica-English Edition. 72, 382 (1998). [Google Scholar]
- D. Y. Susanti, W. B. Sediawan, M. Fahrurrozi, and M. Hidayat, Studies on Kinetics and Optimum Agitation of Phenolic Compound Extraction from Intact Red Sorghum. in Lecture Notes in Mechanical Engineering. 755 (2020). [Google Scholar]
- J. Meng, J. Huang, and X. Xu, Thermophysical properties of Cu-coated carbon fibers reinforced aluminum matrix composites by stir casting. Carbon Lett. 33, 2053 (2023). [Google Scholar]
- A. Zulfia, D. Ramdaniawati, and D. Dhaneswara, The Role of Al2O3 Nanoparticles Addition on Characteristic of Al6061 Composite Produced by Stir Casting Process. Int. J. Mater. Sci. Eng. 6, 39 (2018). [Google Scholar]
- J. Hashim, L. Looney, and M. S. J. Hashmi, The Wettability of SiC Particles by Molten Aluminium Alloy. J. Mater. Process. Technol. 119, 324 (2001). [Google Scholar]
- L. Poovazhagan, K. Rajkumar, P. Saravanamuthukumar, S. Javed Syed Ibrahim , and S. Santhosh, Effect of Magnesium Addition on Processing the Al-0.8 Mg-0.7 Si/SiCp Metal Matrix Composites. Appl. Mech. Mater. 787, 553 (2015). [Google Scholar]
- Z. Dong et al., Improvement of microstructure and strengthening mechanism in TiC particle reinforced aluminum matrix composites via copper nanocoating. J. Mater. Res. Technol. 39, 3166 (2025). [Google Scholar]
- S. Rawal, H. Prakash, and A. M. Sidpara, Fabrication, Characterization and Micro-machinability of Stir-Cast A16061/GNPs + Mg Nanocomposite, Met. Mater. Int. 31, 864 (2025). [Google Scholar]
- A. Zulfia, K. Raga, W. Narottama, and S. Yunus, Al6061 Reinforced Al2O3 Metal Matrix Composite Produced by Double Blade Stir Casting. Int. J. Adv. Sci. Eng. Inf. Technol. 9, 1544 (2019). [Google Scholar]
- A. Kareem, J. A. Qudeiri, A. Abdudeen, T. Ahammed, and A. Ziout, A review on aa 6061 metal matrix composites produced by stir casting. Materials (Basel). 14, 1 (2021). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.