Open Access
Issue
E3S Web Conf.
Volume 730, 2026
International Conference on Advances and Innovations in Soft Soil Engineering (Soft Soils 2026)
Article Number 02005
Number of page(s) 8
Section Multiphysics Behaviour
DOI https://doi.org/10.1051/e3sconf/202673002005
Published online 03 August 2026
  1. Q. Luo, X. Chen, Experimental research on creep characteristics of Nansha soft soil. Sci. World. J. 1, 968738 (2014). https://doi.org/10.1155/2014/968738 [Google Scholar]
  2. W.Q. Feng, B. Lalit, Z.Y. Yin, J.H. Yin, Long-term nonlinear creep and swelling behavior of Hong Kong Marine deposits in oedometer condition. Comput. Geotech. 84, 1–15 (2017). [Google Scholar]
  3. M.J. Singh, F. Weiqiang, X. Dong-Sheng, L. Borana, Experimental study of compression behavior of Indian black cotton soil in oedometer condition. Int. J. Geosynth. Gr. Eng. 6, 1–13 (2020). [Google Scholar]
  4. X.B. Xu, Z.D. Cui, Investigation of a fractional derivative creep model of clay and its numerical implementation. Comput. Geotech. 119,103387 (2020). https://doi.org/10.1016/j.compgeo.2019.103387 [Google Scholar]
  5. B.S. Olek, An experimental investigation of the influence of plasticity on creep degradation rate. Acta. Geotech. 17, 803–817 (2022). https://doi.org/10.1007/s11440-021-01272-z [Google Scholar]
  6. X. Xie, S. Qi, F. Zhao, D. Wang, Creep behavior and the microstructural evolution of loess-like soil from Xi’an area, China. Eng. Geol. 236, 43–59 (2018). https://doi.org/10.1016/j.enggeo.2017.11.003 [Google Scholar]
  7. P. Li, W. Xie, R.Y.S. Pak, Microstructural evolution of loess soils from the Loess Plateau of China. CATENA. 173, 276–288 (2019). https://doi.org/10.1016/j.catena.2018.10.006 [Google Scholar]
  8. I.A. Okewale, Compressibility and the effects of structure of Tropical Clay in Incremental Loading Oedometer tests. Geotech. Geol. Eng. 38, 5355–5371 (2020). https://doi.org/10.1007/s10706-020-01369-4 [Google Scholar]
  9. Y.N. Wei, W. Fan, B. Yu, L.S. Deng, T. Wei, Characterization and evolution of three-dimensional microstructure of Malan loess. CATENA. 192 (2020). https://doi.org/10.1016/j.catena.2020.104585 [Google Scholar]
  10. Y. Wang, H. Yang, X. Jing, Structural characteristics of natural loess in Northwest China and its effect on shear behavior. Geotech. Geol. Eng. 39, 65–78 (2021). https://doi.org/10.1007/s10706-020-01420-4 [Google Scholar]
  11. D. Zhao, M. Hattab, P.Y. Hicher, Z.Y. Yin, Effect of stress level on the microstructural evolution of clay under creep. J. Eng. Mech. 148, 1–17 (2022). [Google Scholar]
  12. B.G. Mesri, Coefficient of secondary compression. J. soil. Mech. Found. Div. 99, 123–137 (1973). [Google Scholar]
  13. P. Delage, G. Lefebvre, Study of the structure of a sensitive Champlain clay and of its evolution during consolidation. Can. Geotech. J. 21, 21–35 (1984). https://doi.org/10.1139/t84-003 [CrossRef] [Google Scholar]
  14. L. Bjerrum, Engineering geology of Norwegian normally-consolidated marine clays as related to settlements of buildings. Geotechnique. 17, 83–118 (1967). https://doi.org/10.1680/geot.1967.17.2.83 [Google Scholar]
  15. J.K. Mitchell, K. Soga, Fundamentals of soil behavior (Vol. 3, p. USA). New York: John Wiley and Sons (2005). [Google Scholar]
  16. J.H. Yin, Calculation of settlements of foundation soils considering creep. In: Soft ground engineering in coastal areas. Proceedings of the Nakase memorial symposium 205 – 11 (2003). [Google Scholar]
  17. T.M. Le, B. Fatahi, H. Khabbaz, Viscous behaviour of soft clay and inducing factors. Geotech. Geol. Eng. 30, 1069 – 1083 (2012). https://doi.org/10.1007/s10706-012-9535-0 [Google Scholar]
  18. T. Ma, C. Wei, C. Yao, P. Yi, Microstructural evolu tion of expansive clay during drying–wetting cycle. Acta. Geotech. 15, 2355–2366 (2020). https://doi.org/10.1007/s11440-020-00938-4 [Google Scholar]
  19. Q.F. Gao, L. Zeng, Z.N. Shi, R. Zhang, Evolution of unsaturated shear strength and microstructure of a compacted silty clay on wetting paths. Int. J. Geomech. 21, 1–12 (2021). [Google Scholar]
  20. B. Lian, X. Wang, H. Zhan, J. Wang, J. Peng, T. Gu, R. Zhu, Creep mechanical and microstructural insights into the failure mechanism of loess landslides induced by dry-wet cycles in the Heifangtai platform, China. Eng. Geol. 300, 106589 (2022). https://doi.org/10.1016/j.enggeo.2022.106589 [Google Scholar]
  21. P.Y. Hicher, H. Wahyudi, D. Tessier, Microstructural analysis of inherent and induced anisotropy in clay. Mech. Cohesive-Frictional. Mater. 5, 341–371 (2000). [Google Scholar]
  22. X. Zhang, L. Kong, A. Guo, Y. Tuo, Evolution of micro scopic pore of structured clay in compression process based on SEM and MIP test. Yanshilixue Yu Gongcheng Xuebao/Chinese. J. Rock. Mech. Eng. 31, 406–412 (2012). [Google Scholar]
  23. M. Hattab, T. Hammad, J.M. Fleureau, Internal friction angle variation in a kaolin/montmorillonite clay mix and microstructural identification. Geotechnique. 65, 1–11 (2015). https://doi.org/10.1680/geot.13.P.081 [Google Scholar]
  24. H. Lei, H. Lu, X. Wang, Q. Ren, B. Li, Changes in soil micro-structure for natural soft clay under accelerated creep condition. Mar. Georesources. Geotechnol. 34, 365 375 (2016). https://doi.org/10.1080/10641.19X.2015.1010669 [Google Scholar]
  25. F. Cotecchia, S. Guglielmi, F. Cafaro, A. Gens, Characterization of the multi-scale fabric features of high plasticity clays. Geotech. Lett. 9, 361–368 (2019). https://doi.org/10.1680/jgele.18.00230 [Google Scholar]
  26. J. Li, Y. Tang, W. Feng, Creep behavior of soft clay subjected to artificial freeze–thaw from multiple-scale perspectives. Acta. Geotech. 15, 2849–2864 (2020). https://doi.org/10.1007/s11440-020-00980-2 [Google Scholar]
  27. J. Yuan, Y. Gan, J. Chen, S. Tan, J. Zhao, Experimental research on consolidation creep characteristics and microstructure evolution of soft soil. Front. Mater. 10, 1–8 (2023). https://doi.org/10.3389/fmats.2023.11373-24 [Google Scholar]
  28. R. Jia, H. Lei, K. Li, Compressibility and microstructure evolution of different reconstituted clays during 1D compression. Int. J. Geomech, 20, 1–14 (2020). [Google Scholar]
  29. D. Zhao, Q.F. Gao, M. Hattab, P.Y. Hicher, Z.Y. Yin, Microstructural evolution of remolded clay related to creep. Transp. Geotech, 24, 100367 (2020). https://doi.org/10.1016/j.trgeo.2020.100367 [Google Scholar]
  30. V.B. Kami, A. Mishra, Microstructural analysis of creep in soft clays under loading and unloading stress cycles. Geotech. Geol. Eng, 42, 1–19 (2024). https://doi.org/10.1007/s10706-024-02941-y [Google Scholar]
  31. V.B. Kami, A. Mishra, A comprehensive study on microstructural behavior of clay under oedometer condition. Bull. Eng. Geol. Environ, 84, 107 (2025). https://doi.org/10.1007/s10064-025-04129-x [Google Scholar]
  32. Origin 8.5.1 version, Northampton, MA: OriginLab Corporation (2011). https://www.originlab.com [Google Scholar]
  33. X.Y. Lei, Pore types of loess soils in China and its collapsibility. Sci. China. B, 12, 1310–1316 (1987). [Google Scholar]
  34. C.M. Barton, The micromorphological soil-investigation work of Dr. D. Lafeber. In Soil Microscopy Proceedings of the International Working Meeting on Soil Micromorphology (1974). [Google Scholar]
  35. H. Kodama, R.E. Grim, Clay mineral. Encyclopedia Britannica (2018). [Google Scholar]
  36. R.H. Meade, Removal of water and rearrangement of particles during the compaction of clayey sediments. US Government Printing Office (1964). [Google Scholar]
  37. M. Okawara, Y. Saito, K. Soga, Study on the mechanism of consistency characteristics of Na-montmorillonite using the small-angle X-ray scattering method. Clay Science, 23, 9–24 (2019). [Google Scholar]
  38. V. Navarro, E.E. Alonso, Secondary compression of clays as a local dehydration process. Geotechnique. 51, 859–869 (2001). https://doi.org/10.1680/geot.2001.51.10.859 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.