Simple heat transfer correlations for turbulent tube flow
E3S Web Conf., 13 (2017) 02008
Published online: 2017-02-10
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Deep learning-based prediction of dynamic heat transfer coefficients for two-phase heat exchanger zonal modeling
Xiaozhe Duan, Xudong Ding, Hui Li, Xiaohang Qin, Kang Xia, Yan Zhao and Chenlu HuangApplied Thermal Engineering 294 130583 (2026)
https://doi.org/10.1016/j.applthermaleng.2026.130583
Production of Methanol by CO2 Hydrogenation Using a Membrane Reactor
Fausto Gallucci, Serena Poto, Margot Anabell Llosa Tanco and David Alfredo Pacheco TanakaCatalysts 16 (1) 53 (2026)
https://doi.org/10.3390/catal16010053
Thermal-hydraulic analysis of helical coil once-through steam generator for lead-based cooled fast reactor using a program based on two-fluid model
Zhipeng Liu, Pengrui Qiao, Xueyou Ding and Qinglong WenAnnals of Nuclear Energy 228 112064 (2026)
https://doi.org/10.1016/j.anucene.2025.112064
Selection of RANS turbulence model for calculating thermal hydraulics of fuel assemblies of LMC reactors at low Reynolds numbers
K. Sergeenko, A. Krutikov, L. Golibrodo, A. Zefirova and M. ShishleninNuclear Engineering and Design 450 114741 (2026)
https://doi.org/10.1016/j.nucengdes.2025.114741
Multiobjective-Optimization of Photovoltaic/Thermal-Coupled Earth-to-Air Heat Exchanger Systems for Energy Efficiency and Thermal Comfort in Residential Buildings
Juan Zhao, Ritu Wu, Bojing Huang, Wenjie Zhang and Omid MahianJournal of Solar Energy Engineering 148 (1) (2026)
https://doi.org/10.1115/1.4069742
Development and validation of a new model for system-integrated shallow borehole heat exchanger fields with irregular geometry
Xenia Kirschstein, Max Ohagen, Joscha Reber and Clemens HüblerGeothermics 134 103481 (2026)
https://doi.org/10.1016/j.geothermics.2025.103481
Experimental and numerical investigation of a photovoltaic water flow window: Enhancing solar energy utilization and building energy efficiency in hot summer and warm winter climates
Wenjie Liu, Jiaxing Song, Jiazhe Zheng, Chongchao Pan, Chunying Li, Tin-tai Chow and Lin LinRenewable Energy 256 124394 (2026)
https://doi.org/10.1016/j.renene.2025.124394
Experimental evaluation of internal air heat transfer capacity in large-scale centrifuges under low-pressure conditions
Jianyong Liu, Jianjing Zheng, Fangfang Xie, Yu Zhao, Guohua Li, Xiao Han and Daosheng LingProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2026)
https://doi.org/10.1177/09544062251409494
Experimental evaluation and modeling of passive thermodynamic vent system in a small liquid nitrogen tank
Jiaxu Zhang, Wujie Zhang, Liangze Xu and Yonghua HuangApplied Thermal Engineering 263 125425 (2025)
https://doi.org/10.1016/j.applthermaleng.2025.125425
An Innovative Cryogenic Heat Exchanger Design for Sustainable Aviation
Francesco Sciatti, Vincenzo Di Domenico, Paolo Tamburrano, Elia Distaso and Riccardo AmiranteEnergies 18 (5) 1261 (2025)
https://doi.org/10.3390/en18051261
A Near-Zero Energy Smart Greenhouse Integrated Into a Microgrid for Sustainable Energy and Microclimate Management
Tuan Minh Tran, Ahmed Ouammi and Louis A-DessaintIEEE Access 13 22243 (2025)
https://doi.org/10.1109/ACCESS.2025.3537536
Hollow Direct Air-Cooled Rotor Windings: Conjugate Heat Transfer Analysis
Avo Reinap, Samuel Estenlund and Conny HögmarkMachines 13 (2) 89 (2025)
https://doi.org/10.3390/machines13020089
Numerical Analysis of Efficiency Improvement in Flat Plate Solar Collectors using Offset Strip Fins
Mohamed Chakib Malti, Zakaria SARI HASSOUN, Khaled Aliane, Younes REKIOUK, Bastien DI PIERRO and Mohammed Abdelbassit KHERRAFIActa Universitatis Sapientiae, Electrical and Mechanical Engineering 16 25 (2025)
https://doi.org/10.47745/auseme-2024-0003
Online determination of transient thermal stresses on the inner surface of a pressure component based on wall temperature measurements near the inner surface
Magdalena Jaremkiewicz, Dawid Taler, Karol Kaczmarski, Jan Taler, Tomasz Sobota, Piotr Dzierwa and Marcin TrojanJournal of Thermal Stresses 48 (12) 1616 (2025)
https://doi.org/10.1080/01495739.2025.2501153
Optimization of a novel biomethane small-scale liquefaction plant by means of a Multi-Objective Genetic Algorithm
Vincenzo Di Domenico, Francesco Sciatti, Paolo Tamburrano, Elia Distaso and Riccardo AmiranteJournal of Physics: Conference Series 3143 (1) 012021 (2025)
https://doi.org/10.1088/1742-6596/3143/1/012021
A High-Accuracy CFD-Based Correlation for Single-Phase Turbulent Flow in Axial Multi-Tube Heat Exchangers
Samer Ali, Rani Taher, Jalal Faraj, Mahmoud Khaled, Tareq Salameh, Abdul-Kadir Hamid and Mousa HusseinResults in Engineering 107219 (2025)
https://doi.org/10.1016/j.rineng.2025.107219
Generation of Four-Beam Output in a Bonded Nd:YAG/Cr4+:YAG Laser via Fiber Splitter Pumping
Qixiu Zhong, Dongdong Meng, Zhanduo Qiao, Wenqi Ge, Tieliang Zhang, Zihang Zhou, Hong Xiao and Zhongwei FanPhotonics 12 (8) 760 (2025)
https://doi.org/10.3390/photonics12080760
Cooling Systems for High-Speed Machines—Review and Design Considerations
Matthew Meier and Elias G. StrangasEnergies 18 (15) 3954 (2025)
https://doi.org/10.3390/en18153954
CFD Investigations to Understand Thermal Performance of Helically Rifled Heat Transfer Enhancements in Molten Salt Applications
James R. Vulcanoff, Ryan P. McGuire and Lane B. CarasikNuclear Science and Engineering 199 (9) 1425 (2025)
https://doi.org/10.1080/00295639.2025.2455896
Effect of low-concentration CuO and RGO hybrid nanofluids on thermal performance of automotive radiator: an experimental study and correlations development
B. M. Praveenkumara, H. M. Shankara Murthy, B. Sadashive Gowda, Arun C. Dixith U, D. Shrinivasa and E. AmruthJournal of Thermal Analysis and Calorimetry 150 (7) 5775 (2025)
https://doi.org/10.1007/s10973-025-14129-4
818 (2024)
https://doi.org/10.1109/ITECAsia-Pacific63159.2024.10738540
General numerical method for hydraulic and thermal modelling of the steam superheaters
Katarzyna Węglarz, Dawid Taler, Jan Taler and Mateusz MarcinkowskiEnergy 291 130371 (2024)
https://doi.org/10.1016/j.energy.2024.130371
Measurement of the temperature of the fluid inside the tube based on the temperature measurement of the thermally insulated outer surface
Tomasz Sobota, Dawid Taler and Jan TalerInternational Journal of Heat and Mass Transfer 228 125622 (2024)
https://doi.org/10.1016/j.ijheatmasstransfer.2024.125622
Convective Heat Transfer in PWR, BWR, CANDU, SMR, and MSR Nuclear Reactors—A Review
Daria Sikorska, Julia Brzozowska, Agata Pawełkiewicz, Mateusz Psykała, Przemysław Błasiak and Piotr KolasińskiEnergies 17 (15) 3652 (2024)
https://doi.org/10.3390/en17153652
Advancements in analyzing air-side heat transfer coefficient on the individual tube rows in finned heat exchangers: Comparative study of three CFD methods
Mateusz Marcinkowski, Dawid Taler, Katarzyna Węglarz and Jan TalerEnergy 307 132754 (2024)
https://doi.org/10.1016/j.energy.2024.132754
Innovative analysis of local and average air-side heat transfer coefficients in fin-and-tube heat exchangers using CFD and experimental method
Mateusz Marcinkowski, Dawid Taler, Jacek Sacharczuk, Katarzyna Węglarz and Jan TalerEnergy 309 133084 (2024)
https://doi.org/10.1016/j.energy.2024.133084
Unveiling the fundamentals of flow boiling heat transfer enhancement on structured surfaces
Mohammad Jalal Inanlu, Vishwanath Ganesan, Nithin Vinod Upot, Chi Wang, Zan Suo, Kazi Fazle Rabbi, Pouya Kabirzadeh, Alireza Bakhshi, Wuchen Fu, Tarandeep Singh Thukral, Valentin Belosludtsev, Jiaqi Li and Nenad MiljkovicScience Advances 10 (45) (2024)
https://doi.org/10.1126/sciadv.adp8632
A Comprehensive Review of Mixed Convective Heat Transfer in Tubes and Ducts: Effects of Prandtl Number, Geometry, and Orientation
Mohd Farid Amran, Sakhr M. Sultan and C. P. TsoProcesses 12 (12) 2749 (2024)
https://doi.org/10.3390/pr12122749
A Novel Hydrogen-Nitrogen Heat Exchanger For Aeronautical Applications
Vincenzo Di Domenico, Paolo Tamburrano, Francesco Sciatti, Elia Distaso, Mario Massimo Foglia and Riccardo AmiranteJournal of Physics: Conference Series 2893 (1) 012082 (2024)
https://doi.org/10.1088/1742-6596/2893/1/012082
Numerical analysis of a steady-state and transient performance using a tube-in-tube heat exchanger unit for cryogenic process simulator
Vinit Shukla, Aafaq Alam, Nitin Shah, Hitensinh Vaghela and Parthasarathi GhoshCryogenics 138 103801 (2024)
https://doi.org/10.1016/j.cryogenics.2024.103801
Comparative study of heat transfer and pressure drop in turbulent flow of a singular and hybrid nanofluids into a horizontal pipe
Maryam Mousavi, Parviz Darvishi and Abdolrasoul PouranfardJournal of Thermal Analysis and Calorimetry 148 (24) 14375 (2023)
https://doi.org/10.1007/s10973-023-12570-x
Investigation of Thermo-Hydraulic Performances of Artificial Ribs Mounted in a Rectangular Duct
B. Varun Kumar, P. Rajesh Kanna, G. Manikandan, Dawid Taler, Jan Taler, Tomasz Sobota and Marzena Nowak-OcłońEnergies 16 (11) 4404 (2023)
https://doi.org/10.3390/en16114404
Experimental validation of the dynamic thermal network approach in modeling buried pipes
Saleh S. Meibodi and Simon ReesScience and Technology for the Built Environment 29 (6) 589 (2023)
https://doi.org/10.1080/23744731.2023.2222622
Parabolic trough solar collector: A review on geometrical interpretation, mathematical model, and thermal performance augmentation
Raman Kumar Singh and Prakash ChandraEngineering Research Express 5 (1) 012003 (2023)
https://doi.org/10.1088/2631-8695/acc00a
Numerical Modelling of Steam Superheaters in Supercritical Boilers
Katarzyna Węglarz, Dawid Taler, Jan Taler and Mateusz MarcinkowskiEnergies 16 (6) 2615 (2023)
https://doi.org/10.3390/en16062615
Verification of the capacity of lubricating oil cooler system of turbine bearings
George T Pitchurov, Detelin Markov and Emanuil GeorgievIOP Conference Series: Earth and Environmental Science 1128 (1) 012019 (2023)
https://doi.org/10.1088/1755-1315/1128/1/012019
Validity of chlorine-wall reaction models for drinking water distribution systems
Ian Fisher, George Kastl and Arumugam SathasivanUrban Water Journal 20 (9) 1157 (2023)
https://doi.org/10.1080/1573062X.2023.2241437
Numerical investigation of heat transfer enhancement in solar air heaters using polygonal-shaped ribs and grooves
B. Varun Kumar, Chithirai Pon Selvan, P. Rajesh Kanna, Dawid Taler, Magdalena Szymkiewicz and Jan TalerFrontiers in Energy Research 11 (2023)
https://doi.org/10.3389/fenrg.2023.1279225
The Control of Lava Rheology on the Formation of Lunar Sinuous Rilles by Substrate Thermal Erosion: Topographic and Morphometric Relationships with Eruption Rates, Erosion Rates, Event Durations, and Erupted Magma Volumes
Lionel Wilson and James W. HeadThe Planetary Science Journal 4 (11) 210 (2023)
https://doi.org/10.3847/PSJ/acfda3
Adaptation of the turbulence model to the heat transfer in a rod bundle
K. SergeenkoNuclear Engineering and Design 415 112664 (2023)
https://doi.org/10.1016/j.nucengdes.2023.112664
Thermodynamic Analysis of a Small-scale Biomethane Liquefaction Process
P Tamburrano, M Salvatori, M Fedele, M Meschia, E Distaso, P De Palma and R AmiranteJournal of Physics: Conference Series 2385 (1) 012043 (2022)
https://doi.org/10.1088/1742-6596/2385/1/012043
The Forced Convection Analysis of Water Alumina Nanofluid Flow through a 3D Annulus with Rotating Cylinders via κ−ε Turbulence Model
Marei Saeed Alqarni, Abid Ali Memon, Haris Anwaar, Usman and Taseer MuhammadEnergies 15 (18) 6730 (2022)
https://doi.org/10.3390/en15186730
Analysis of Forced Convection with Hybrid Cu‐Al2O3 Nanofluids Injected in a Three‐Dimensional Rectangular Channel Containing Three Perpendicular Rotating Blocks with κ − ε Turbulent Modeling
S. H. Elhag, Abid A. Memon, M. Asif Memon, Kaleemullah Bhatti, Kavikumar Jacob, Samirah Alzahrani, Jamel Seidu and Zafar SaidJournal of Nanomaterials 2022 (1) (2022)
https://doi.org/10.1155/2022/2446972
A new approach to predict fouling using a transient CFD model and dynamic mesh
Juan Flores-Balderas, Jorge Alfaro-Ayala, Jose Ramirez-Minguela, Agustín Uribe-Ramírez and Oscar Lopez-NunezThermal Science 26 (6 part B) 5001 (2022)
https://doi.org/10.2298/TSCI211206085F
(2022)
https://doi.org/10.52460/issc.2022.036
Thermo-fluid analysis of a pentagonal ribbed triangular solar air heater duct (TSAHD): A three-dimensional numerical investigation
Yadaba Mahanand and Jnana Ranjan SenapatiInternational Communications in Heat and Mass Transfer 137 106258 (2022)
https://doi.org/10.1016/j.icheatmasstransfer.2022.106258
Experimental Investigation on the Effect of Semi-circular Perforated Baffles with Semi-circular Fins on Air–Water Double Pipe Heat Exchanger
Maha A. Hussein and Vinous M. HameedArabian Journal for Science and Engineering 47 (5) 6115 (2022)
https://doi.org/10.1007/s13369-021-05869-0
Efficacy of turbulent convective heat transfer in a circular tube with water-based nanoemulsion of n–Eicosane–An experimental study
C.J. Ho, Kun-Hung Lin, Tien-Fu Yang, Saman Rashidi and Wei-Mon YanInternational Journal of Heat and Mass Transfer 183 122062 (2022)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.122062
Fundamental Concepts of Liquid-Propellant Rocket Engines
Alessandro de Iaco VerisSpringer Aerospace Technology, Fundamental Concepts of Liquid-Propellant Rocket Engines 63 (2021)
https://doi.org/10.1007/978-3-030-54704-2_2
Large Eddy Simulation of Turbulent Heat Transfer in Pipe Using NEK5000 Based on the Spectral Element Method and Uncertainty Quantification by GCI Estimation
Khanh Hoan Nguyen and Kyoungsik ChangInternational Journal of Computational Fluid Dynamics 35 (3) 210 (2021)
https://doi.org/10.1080/10618562.2021.1926999
Experimental Study of Heat Transfer Enhancement in Solar Tower Receiver Using Internal Fins
Hashem Shatnawi, Chin Wai Lim, Firas Basim Ismail and Abdulrahman AldossaryComputers, Materials & Continua 68 (2) 1693 (2021)
https://doi.org/10.32604/cmc.2021.016741
Effects of Experimental Parameters on Condensation Heat Transfer in Plate Fin Heat Exchanger
Sung-Hoon Seol, Sun-Geun Lee, Chang-Hyo Son, Ji-Hoon Yoon, In-Seob Eom, Young-Min Park and Jung-In YoonEnergies 14 (22) 7681 (2021)
https://doi.org/10.3390/en14227681
Direct conversion of CO2 to dimethyl ether in a fixed bed membrane reactor: Influence of membrane properties and process conditions
Serena Poto, Fausto Gallucci and M. Fernanda Neira d'AngeloFuel 302 121080 (2021)
https://doi.org/10.1016/j.fuel.2021.121080
Optimization of parameters for air dehumidification systems including multilayer fixed-bed binder-free desiccant dehumidifier
Lili Yu, Jubair A. Shamim, Wei-Lun Hsu and Hirofumi DaigujiInternational Journal of Heat and Mass Transfer 172 121102 (2021)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.121102
Temperature error in a hydrostatic leveling system and its reduction
Roman V. Tsvetkov, Sergey V. Lekomtsev and Valery V. YepinStructural Control and Health Monitoring 28 (2) (2021)
https://doi.org/10.1002/stc.2668
Numerical and experimental investigation on thermal-hydraulic characteristics of a scroll expander for organic Rankine cycle
Jinwoo Oh, Hoyoung Jeong, Joonbyum Kim and Hoseong LeeApplied Energy 278 115672 (2020)
https://doi.org/10.1016/j.apenergy.2020.115672
Study of wall-to-bed heat transfer in circulating fluidized bed riser based on CFD simulation
Waritnan Wanchan, Parinya Khongprom and Sunun LimtrakulChemical Engineering Research and Design 156 442 (2020)
https://doi.org/10.1016/j.cherd.2020.02.021
Study of water-filled double-glazing with submerged heat exchanger for solar absorption
Wenjie Liu and Tin-Tai ChowApplied Thermal Engineering 171 115019 (2020)
https://doi.org/10.1016/j.applthermaleng.2020.115019
Modeling and experimental validation and thermal performance assessment of a sun-tracked and cooled PVT system under low solar irradiation
Paweł Ocłoń, Piotr Cisek, Ewa Kozak-Jagieła, Jan Taler, Dawid Taler, Dorota Skrzyniowska and Małgorzata Fedorczak-CisakEnergy Conversion and Management 222 113289 (2020)
https://doi.org/10.1016/j.enconman.2020.113289
Produced Water Desalination via Pervaporative Distillation
Jingbo Wang, Dian Tanuwidjaja, Subir Bhattacharjee, Arian Edalat, David Jassby and Eric M. V. HoekWater 12 (12) 3560 (2020)
https://doi.org/10.3390/w12123560
The Physics of Polarized Targets
The Physics of Polarized Targets 339 (2020)https://doi.org/10.1017/9781108567435.009
Theoretical research of heat exchange between air flow and shaft lining subject to convective heat transfer
M. A. Semin and L. Yu. LevinMining informational and analytical bulletin (6) 151 (2020)
https://doi.org/10.25018/0236-1493-2020-6-0-151-167
Transient temperature calculation method for complex fluid-solid heat transfer problems with scattering boundary conditions
Peter Hölz, Thomas Böhlke and Thomas KrämerApplied Thermal Engineering 149 1463 (2019)
https://doi.org/10.1016/j.applthermaleng.2018.12.081
Design of zero liquid discharge desalination (ZLDD) systems consisting of freeze desalination, membrane distillation, and crystallization powered by green energies
Kang Jia Lu, Zhen Lei Cheng, Jian Chang, Lin Luo and Tai-Shung ChungDesalination 458 66 (2019)
https://doi.org/10.1016/j.desal.2019.02.001