Cost, resources, and energy efficiency of additive manufacturing
E3S Web Conf., 14 (2017) 01040
Published online: 2017-03-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Evaluation of Machine Learning Models for Enhancing Sustainability in Additive Manufacturing
Waqar Shehbaz and Qingjin PengTechnologies 13 (6) 228 (2025)
https://doi.org/10.3390/technologies13060228
Validation of OpenFOAM modeling of additive manufacturing melt pool dynamics against geometric and thermal experiments
Craig M. Weeks, Alexander J. Myers, Jonathan A. Malen and Satbir SinghJournal of Manufacturing Processes 152 237 (2025)
https://doi.org/10.1016/j.jmapro.2025.07.064
Methodology for Cost Estimation Using Characteristic Factors in Additive Manufacturing
Karim Asami, Dirk Herzog, Torben Deutschmann, Tim Röver, Ingomar Kelbassa and Claus EmmelmannJournal of the Japan Society of Powder and Powder Metallurgy 72 (Supplement) S75 (2025)
https://doi.org/10.2497/jjspm.14B-T6-02
Ten questions concerning the integration of digital fabrication techniques into the architectural design process
Asmaa Gamal, Basma Nashaat, Merhan M. Shahda and Shaimaa R. NosierArchitectural Engineering and Design Management 20 (1) 120 (2024)
https://doi.org/10.1080/17452007.2023.2269559
Energy Efficiency in Additive Manufacturing: Condensed Review
Ismail Fidan, Vivekanand Naikwadi, Suhas Alkunte, Roshan Mishra and Khalid TantawiTechnologies 12 (2) 21 (2024)
https://doi.org/10.3390/technologies12020021
83 (2024)
https://doi.org/10.1016/B978-0-323-96020-5.00228-4
Achieving Sustainability in Manufacturing through Additive Manufacturing: An Analysis of Its Enablers
Mohammed Balubaid and Naif AlsaadiSustainability 15 (12) 9504 (2023)
https://doi.org/10.3390/su15129504
A Modelling-Based Framework for Carbon Emissions Calculation in Additive Manufacturing: A Stereolithography Case Study
Vasiliki C. Panagiotopoulou, Aikaterini Paraskevopoulou and Panagiotis StavropoulosProcesses 11 (9) 2574 (2023)
https://doi.org/10.3390/pr11092574
Maximizing Energy Efficiency in Additive Manufacturing: A Review and Framework for Future Research
Gokan May and Foivos PsarommatisEnergies 16 (10) 4179 (2023)
https://doi.org/10.3390/en16104179
The Orientation and High-Quality Effect of Deposit Layer to Surface Roughness on FDM 3D Printed Part
Redyarsa Dharma Bintara, Yanuar Rohmat Aji Pradana, Aminnudin Aminnudin and Heru SuryantoKey Engineering Materials 940 95 (2023)
https://doi.org/10.4028/p-29nh6i
A conceptual framework for layerwise energy prediction in laser-based powder bed fusion process using machine learning
Shradha Ghansiyal, Li Yi, Johanna Steiner-Stark, Marius Marvin Müller, Benjamin Kirsch, Moritz Glatt and Jan C. AurichProcedia CIRP 116 7 (2023)
https://doi.org/10.1016/j.procir.2023.02.002
Strain-rate response of 3D printed 17-4PH stainless steel manufactured via selective laser melting
Giuseppe Brando, Francesca Romana Andreacola, Ilaria Capasso, Daniele Forni and Ezio CadoniConstruction and Building Materials 409 133971 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.133971
3D-printed metals: Process parameters effects on mechanical properties of 17-4 P H stainless steel
Francesca Romana Andreacola, Ilaria Capasso, Antonio Langella and Giuseppe BrandoHeliyon 9 (7) e17698 (2023)
https://doi.org/10.1016/j.heliyon.2023.e17698
Comparison of energy consumption of ABS and PLA while 3 D printing with fused deposition modeling process
Shubhada Warke and V.S. PuranikMaterials Today: Proceedings 66 2098 (2022)
https://doi.org/10.1016/j.matpr.2022.05.509
Energy performance-oriented design candidate selection approach for additive manufacturing using toolpath length comparison method
Li Yi, Bahram Ravani and Jan C. AurichManufacturing Letters 33 5 (2022)
https://doi.org/10.1016/j.mfglet.2022.06.001
227 (2021)
https://doi.org/10.1007/978-981-16-3184-9_9
1 (2020)
https://doi.org/10.1109/ICEIT48248.2020.9113198
Possible Applications of Additive Manufacturing Technologies in Shipbuilding: A Review
Marcin Ziółkowski and Tomasz DylMachines 8 (4) 84 (2020)
https://doi.org/10.3390/machines8040084
An Exploratory Study on the Accuracy of Parts Printed in FDM Processes from Novel Materials
Halina Nieciąg, Rafał Kudelski, Piotr Dudek and Jacek CieślikActa Mechanica et Automatica 14 (1) 59 (2020)
https://doi.org/10.2478/ama-2020-0009
(2020)
https://doi.org/10.4043/30671-MS
APPLICATION OF ADDITIVE TECHNOLOGIES IN PRODUCTION AND THEIR IMPACT ON BUSINESS PROCESSES
Ruslana LisovaState and regions. Series: Economics and Business (5 (110)) (2019)
https://doi.org/10.32840/1814-1161/2019-5-22