The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Interconnection of low-temperature metallization on silicon solar cells - The role of silver in tin-bismuth-based solder alloys
Derya Güldali, Angela De Rose, Max Mittag, Benjamin Grübel, Holger Neuhaus and Ulrich Tetzlaff Solar Energy Materials and Solar Cells 285 113488 (2025) https://doi.org/10.1016/j.solmat.2025.113488
DBD plasma-treated polyester fabric coated with doped PEDOT:PSS for thermoregulation
Cátia Magalhães, Ana Isabel Ribeiro, Rui Rodrigues, Ângela Meireles, Alexandra C. Alves, João Rocha, Fábio Pedroso de Lima, Marcos Martins, Bogdana Mitu, Veronica Satulu, Gheorghe Dinescu, Jorge Padrão and Andrea Zille Applied Surface Science 686 162152 (2025) https://doi.org/10.1016/j.apsusc.2024.162152
Effects of carbon nanotube and curing agent concentrations on the mechanical, thermal and electrical properties of polydimethylsiloxane: optimization and statistical analysis
Waham Ashaier Laftah, Wan Aizan Wan Abdul Rahman and Akos Noel Ibrahim RSC Advances 15(19) 14838 (2025) https://doi.org/10.1039/D5RA01890K
Enhancing Superconductivity in Cu1/2Tl1/2Ba2Ca2Cu3O10−δ with Graphene Incorporation: A Comprehensive Study
Optimizing Electroconductive PPy‐PCL Scaffolds for Enhanced Tissue Engineering Performance
Ana M. Muñoz‐González, Dianney Clavijo‐Grimaldo, Sara Leal‐Marin and Birgit Glasmacher Journal of Biomedical Materials Research Part B: Applied Biomaterials 112(12) (2024) https://doi.org/10.1002/jbm.b.35511
Properties of multi-walled carbon nanotubes grown three-dimensional (3D) woven carbon/epoxy multiscale composites: Experimental study
Novel Water-Based Paints for Composite Materials Used in Electromagnetic Shielding Applications
Ioan Valentin Tudose, Kyriakos Mouratis, Octavian Narcis Ionescu, Cosmin Romanitan, Cristina Pachiu, Marian Popescu, Volodymyr Khomenko, Oksana Butenko, Oksana Chernysh, George Kenanakis, Viacheslav Z. Barsukov, Mirela Petruta Suchea and Emmanouel Koudoumas Nanomaterials 12(3) 487 (2022) https://doi.org/10.3390/nano12030487
Routes towards manufacturing biodegradable electronics with polycaprolactone (PCL) via direct light writing and electroless plating
Mansour Abdulrhman, Adilet Zhakeyev, Carmen M Fernández-Posada, Ferry P W Melchels and Jose Marques-Hueso Flexible and Printed Electronics 7(2) 025006 (2022) https://doi.org/10.1088/2058-8585/ac6b6e
A Review on Optically Transparent Antenna Fabricated with Conductive Nano-Material Oxides
Fabrication and Conductivity of Graphite Nanosheet/Nylon 610 Nanocomposites Using Graphite Nanosheets Treated with Supercritical Water at Different Temperatures
Jun-Ven Lim, Soo-Tueen Bee, Lee Tin Sin, Chantara Thevy Ratnam and Zuratul Ain Abdul Hamid Polymers 14(21) 4660 (2022) https://doi.org/10.3390/polym14214660
High thermal conductivity and thermal boundary conductance of homoepitaxially grown gallium nitride (GaN) thin films
Neutron diffraction study of the Cr84.7Re15.3 alloy
B. S. Jacobs, A. R. E. Prinsloo, A. M. Venter, Z. N. Sentsho, A. J. Studer and C. J. Sheppard AIP Advances 11(1) (2021) https://doi.org/10.1063/9.0000132
Evaluation of Cancer Cell Lines by Four-Point Probe Technique, by Impedance Measurements in Various Frequencies
Georgia Paivana, Dimitris Barmpakos, Sophie Mavrikou, Alexandros Kallergis, Odysseus Tsakiridis, Grigoris Kaltsas and Spyridon Kintzios Biosensors 11(9) 345 (2021) https://doi.org/10.3390/bios11090345
The effect of activated carbon additives on lead sulphide thin film for solar cell applications
Nur Farha Shaafi, Saifful Kamaluddin Muzakir, Shujahadeen B. Aziz, Mohd Fakhrul Zamani Kadir and Suresh Thanakodi Journal of Alloys and Compounds 864 158117 (2021) https://doi.org/10.1016/j.jallcom.2020.158117
Inkjet Printing of PEDOT:PSS Based Conductive Patterns for 3D Forming Applications
Indranil Basak, Gudrun Nowicki, Bart Ruttens, Derese Desta, Jeroen Prooth, Manoj Jose, Steven Nagels, Hans-Gerd Boyen, Jan D’Haen, Mieke Buntinx and Wim Deferme Polymers 12(12) 2915 (2020) https://doi.org/10.3390/polym12122915
Heat exchanger in process of making sagu sep as papua’s contextual science learning media