The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program . You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
Suresh Kumar Tummala , Dhasharatha G
E3S Web Conf., 87 (2019) 01030
Published online: 2019-02-22
This article has been cited by the following article(s):
19 articles
N.Raiashekar Varma, Dhasharatha. G, E.Harsha Vardhan Reddy, A. Manisha, M.Tharun Kumar and K. Charan 151 (2023) https://doi.org/10.1109/ICOEI56765.2023.10125899
Dhasharatha G, Rajasekhar Varma, Banothu Venkat Ramana, Kanugula Madhu, Jakkula Chandra Shekar and G. Nithin 26 (2023) https://doi.org/10.1109/ICCES57224.2023.10192666
N. Ramesh Babu, Kalagotla Chenchireddy, V. Harsha Vardhan Reddy, D. Samhitha, P. Apparao and Ch. pavan Kalyan 1559 (2023) https://doi.org/10.1109/ICAAIC56838.2023.10140812
Integration of solar and wind energy systems with PI and PID controller
Suresh Kumar Tummala, Rakesh G, Ibrahim H. Al-Kharsan, et al. E3S Web of Conferences 391 01002 (2023) https://doi.org/10.1051/e3sconf/202339101002
An Intelligent Adaptive Neural Network Controller for a Direct Torque Controlled eCAR Propulsion System
Gururaj Banda and Sri Gowri Kolli World Electric Vehicle Journal 12 (1) 44 (2021) https://doi.org/10.3390/wevj12010044
Structure and Topography Modifications of Treated AISI 316LN Stainless Steel Surfaces after Friction in Dry Sliding Contact by Case Hardening Process
M. Mamatha Gandhi, Animesh Bain, P Rohith, et al. E3S Web of Conferences 184 01002 (2020) https://doi.org/10.1051/e3sconf/202018401002
Taguchi Optimisation In Machining EN18 Using Coated Tool Under Dry and MQL Condition
Kosaraju Satynarayana, Are Swathi, Kesari Neeraja, et al. E3S Web of Conferences 184 01013 (2020) https://doi.org/10.1051/e3sconf/202018401013
Driving license detection using QR code
Bhavani Ratakonda, Ajay Therala, Chanikya Kumar Hanumanthu, et al. E3S Web of Conferences 184 01010 (2020) https://doi.org/10.1051/e3sconf/202018401010
Investigation of Mechanical Properties of AISI 316 Stainless Steel by Carbonitriding Process
A Rohit Sai Krishna, B Vamshi Krishna, D Harshith, et al. E3S Web of Conferences 184 01018 (2020) https://doi.org/10.1051/e3sconf/202018401018
Adaptive ELM neural computing framework with fuzzy PI controller for speed regulation in permanent magnet synchronous motors
F. Vijay Amirtha Raj and V. Kamatchi Kannan Soft Computing 24 (14) 10963 (2020) https://doi.org/10.1007/s00500-020-04994-6
Turbulent fluid flow and heat transfer analysis of heated rectangular blocks encountered in electronics enclosures
B Ch Nookaraju, S. Tummala, S. Kosaraju, P. Bobba and S. Singh E3S Web of Conferences 184 01027 (2020) https://doi.org/10.1051/e3sconf/202018401027
A Survey on Hybrid Machine Translation
Anusha Anugu, Gajula Ramesh, S. Tummala, et al. E3S Web of Conferences 184 01061 (2020) https://doi.org/10.1051/e3sconf/202018401061
Configurations and Control Strategy of a Single Stage Grid Connected PV System
K. Rajasekhara Reddy, V.Nagabhaskar Reddy, M.Vijaya Kumar, et al. E3S Web of Conferences 184 01074 (2020) https://doi.org/10.1051/e3sconf/202018401074
Experimental Study on Compressive Strength, Water Retention And Water Absorption of self-curing Concrete With Different Curing Conditions
S.P.Raju. V, Martha Saikumar, T. Srinivas, et al. E3S Web of Conferences 184 01118 (2020) https://doi.org/10.1051/e3sconf/202018401118
7-Level Semi Cross Switched Multilevel Inverter Fed Induction Motor Drive
Srinivas Rao Janiga, Suresh Kumar Tummala, S. Tummala, et al. E3S Web of Conferences 184 01075 (2020) https://doi.org/10.1051/e3sconf/202018401075
A Review on Comparison of Mechanical Properties of Dissimilar Steels Welded By TIG and MIG
D. Suresh Kumar, Pendem Srikar, S. Tummala, et al. E3S Web of Conferences 184 01030 (2020) https://doi.org/10.1051/e3sconf/202018401030
Geo-polymerization mechanism and factors affecting it in Metakaolin-slag-fly ash blended concrete
A D Sandeep Kumar, Dinesh Singh, V Srinivasa Reddy, et al. E3S Web of Conferences 184 01080 (2020) https://doi.org/10.1051/e3sconf/202018401080
Improving the Mechanical Properties of AISI 2205 Duplex Stainless Steel by Cryogenic Treatment Process
Shivani Koppula, Aakula Rajkumar, Siram Hari Krishna, et al. E3S Web of Conferences 184 01019 (2020) https://doi.org/10.1051/e3sconf/202018401019
A Role of cryogenic in Wire cut EDM process
Kosaraju Satynarayana, Kumkuma Rajkiran, Pujari Anil kumar, et al. E3S Web of Conferences 184 01067 (2020) https://doi.org/10.1051/e3sconf/202018401067