Slowing down the corrosion of metal structures using polymeric materials
E3S Web Conf., 264 (2021) 02055
Published online: 2021-06-02
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Study of modified thermoplastic elastomers based on polyethylene chlorinated with thiokol rubbers
F. Nurkulov, J. Ziyamukhamedov, L. Bakirov, E. Rakhmatov, U. Shoazimova, G. Li, U. Subramaniam and M. SekarE3S Web of Conferences 491 01021 (2024)
https://doi.org/10.1051/e3sconf/202449101021
A Review of the Application of Synthetic and Natural Polymers as Construction and Building Materials for Achieving Sustainable Construction
Jolanta Tamošaitienė, Shokoh Parham, Hadi Sarvari, Daniel W. M. Chan and David J. EdwardsBuildings 14 (8) 2569 (2024)
https://doi.org/10.3390/buildings14082569
Material selection for vehicle brake chamber case with using computer methods of analysis
Alimjon Riskulov, Khurshidbek Nurmetov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 02061 (2023)
https://doi.org/10.1051/e3sconf/202340102061
The effect comparative evaluation of energy saving additives on the bitumen properties
Alimjon Riskulov, Takhira Sidikova, Rovshan Khakimov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 03069 (2023)
https://doi.org/10.1051/e3sconf/202340103069
The effect comparative evaluation of energy-saving additives on the bitumen properties
Alimjon Riskulov, Takhira Sidikova, Rovshan Khakimov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 05028 (2023)
https://doi.org/10.1051/e3sconf/202340105028
Investigation of heat exchange processes in the lining of induction furnaces
Tokhir Tursunov, Nodirjon Tursunov, Talgat Urazbayev and D. BazarovE3S Web of Conferences 401 05029 (2023)
https://doi.org/10.1051/e3sconf/202340105029
Development of technology for formation of AI-B-N system joints under influence of high pressures and temperatures to create composite tool material
Sherzod Fayzibayev, Oleg Ignotenko, Talgat Urazbaev, Sherali Mamayev, Jasur Nafasov and D. BazarovE3S Web of Conferences 401 05016 (2023)
https://doi.org/10.1051/e3sconf/202340105016
Improving physical and mechanical properties of bentonite clay from Navbahar clay deposit
Lochinbek Kuchkorov, Nodirjon Tursunov, Anna Avdeeva and D. BazarovE3S Web of Conferences 401 05020 (2023)
https://doi.org/10.1051/e3sconf/202340105020
Study of the physico-chemical characteristics of reinforced composite polymer materials
Shukhrat Khalimov, Farkhodkhon Nishonov, Dilmurod Begmatov, Farooq Wani Mohammad, Umida Ziyamukhamedova and D. BazarovE3S Web of Conferences 401 05039 (2023)
https://doi.org/10.1051/e3sconf/202340105039
Polymer-bitumen composition for insulation purpose
Bekhzod Yoqubov, Akhmadjon Ibadullaev, Dilnora Yoqubova and D. BazarovE3S Web of Conferences 401 05071 (2023)
https://doi.org/10.1051/e3sconf/202340105071
Research of hydroabrasive wear resistance of organomineral coatings depending on operating environment conditions
Javohirbek Ziyamukhamedov, Jasurbek Nafasov, Erkin Rakhmatov, Zakirkhodja Tadjikhodjaev, Alijon Djumabaev and D. BazarovE3S Web of Conferences 401 05072 (2023)
https://doi.org/10.1051/e3sconf/202340105072
Multifunctional ingredients for composite elastomer materials
Sardorbek Ahmadjonov, Elmira Teshabaeva, Makhfuza Akhmedova, et al.E3S Web of Conferences 383 04035 (2023)
https://doi.org/10.1051/e3sconf/202338304035
Improvement of the out-of-furnace steel treatment technology for improving its mechanical properties
Otabek Toirov, Nodirjon Tursunov, Shavkat Alimukhamedov, Lochinbek Kuchkorov and D. BazarovE3S Web of Conferences 365 05002 (2023)
https://doi.org/10.1051/e3sconf/202336505002
Effect of different additives on the physical and mechanical properties of liquid-glass core mixtures
Lochinbek Kuchkorov, Shavkat Alimukhamedov, Nodirjon Tursunov, Otabek Toirov and D. BazarovE3S Web of Conferences 365 05009 (2023)
https://doi.org/10.1051/e3sconf/202336505009
Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron
Murot Turakulov, Nodirjon Tursunov, Shavkat Alimukhamedov and D. BazarovE3S Web of Conferences 365 05006 (2023)
https://doi.org/10.1051/e3sconf/202336505006
Gas pyrolysis resin as a plasticizer for composite elastomer materials
Elmira Teshabaeva, Hikoyat Ergashova, Sardorbek Ahmadjonov, et al.E3S Web of Conferences 383 04036 (2023)
https://doi.org/10.1051/e3sconf/202338304036
Study of the profiles of the distribution of atoms of the contacting material over the depth of pure and ion-doped silicon
S.B. Donaev, G.M. Shirinov, S. Ergasheva, et al.E3S Web of Conferences 383 04041 (2023)
https://doi.org/10.1051/e3sconf/202338304041
Creation of special compositions based on butadiene-nitrile elastomers for diesels
Sherali Mamayev, Axmadjan Ibadullayev, Dilnoza Nigmatova, Elmira Teshabayeva, Mukhsinjon Tursunaliev and D. BazarovE3S Web of Conferences 401 03028 (2023)
https://doi.org/10.1051/e3sconf/202340103028