E3S Web Conf.
Volume 264, 2021International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|Number of page(s)||7|
|Section||Road Construction, Building Structures and Materials|
|Published online||02 June 2021|
Slowing down the corrosion of metal structures using polymeric materials
1 Tashkent Scientific Research Institute of Chemical Technology, Tashkent, Uzbekistan
2 Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
This article examines the resistance of corrosion-resistant polymeric materials to chemical reagents and the degree of corrosion, taking into account the direction of corrosion processes. One of the main factors that determined the corrosion rate is air humidity and dust released into the atmosphere during industrial emissions. Mixtures based on polymer materials can be used to gum up chemical apparatus and equipment; for corrosion protection, expensive materials are required. The sample is conditioned for 30 months at (23 ± 2) 0С, relative humidity (50 ± 5) %, and the thickness of the sample is determined. Resistance to chemical reagents the change in mass of samples of polymeric materials at a temperature of 35 0C for 3 months was analyzed. It was also found that by determining the corrosion rate (grade St3) by storing steel plates in a different exposure environment for 50 days. As a result, the corrosion rate of steel anti-corrosion coatings is lower than the control sample. According to the data obtained, it was found that the chloro-sulfonated polyethylene compositions are resistant to various organic solvents, acids, alkalis, oxidizing agents, and others.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.