3D printed concrete using Portland pozzolana cement - fly ash based
E3S Web Conf., 529 (2024) 01019
Published online: 2024-05-29
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Designing 3D-printed concrete with ternary blended mortars incorporating fly ash and silica fume: effects of low water-binder ratios on workability and strength
Kamrul Hasan, Aizat Alias, Mehedi Hasan, Fadzil Mat Yahaya and Khairul Fikri MuhammadInnovative Infrastructure Solutions 11 (2) (2026)
https://doi.org/10.1007/s41062-025-02474-0
Understanding the role of supplementary cementitious materials in 3D printed concrete
Devansh Goel, Sudarshan D. Kore and Ana BlancoMagazine of Concrete Research 1 (2026)
https://doi.org/10.1680/jmacr.25.00336
Factors affecting flowability and rheological behavior of 3D printed concrete: A comprehensive review
Fazlul Hoque Tushar, Mehedi Hasan, Kamrul Hasan, Jannatul Mawa and Mostaq HabibConstruction and Building Materials 508 145140 (2026)
https://doi.org/10.1016/j.conbuildmat.2026.145140
Effect of ground copper slag on the fresh properties of 3d printed cementitious composites
Martyna Nieświec, Adrian Chajec and Branko ŠavijaScientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-025-02996-8
Performance Requirements and Optimum Mix Proportion of High-Volume Fly Ash 3D Printable Concrete
Hatice Gizem Şahin, Ali Mardani and Naz MardaniBuildings 14 (7) 2069 (2024)
https://doi.org/10.3390/buildings14072069