EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 529 (2024) E3S Web of Conf., 529 (2024) 01019 References
Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01019
Number of page(s) 13
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901019
Published online 29 May 2024
  1. Zhu, Egbe, Shi, Jiao, Salehi (2024) “Eco-friendly 3D printed concrete with fine aggregate replacements: Fabrication, characterization and machine learning prediction.” Construction and Building Materials. [Google Scholar]
  2. Abu Qamar, Emad Yaghmour, Xingjian Wang (2024) “Use of 3D printed concrete components for thermal energy storage.” Construction and Building Materials. [Google Scholar]
  3. Andy Coward, Jesper Harrild Sorensen (2023) “3D printed concrete beams as optimized load-carrying structural elements – The Minimass beam.” Structures. [Google Scholar]
  4. Giridhar G, Prem P R, Kumar S (2023) “Development of concrete mixes for 3D printing using simple tools and techniques.” Sādhanā: Academy Proceedings in Engineering Sciences, 48(1):1–13. [Google Scholar]
  5. Jiaqi Tong, Yahong Ding, Xiuwen Lv, Wei Ning (2023) “Effect of carbonated recycled coarse aggregates on the mechanical properties of 3D printed recycled concrete.” Journal of Building Engineering. [Google Scholar]
  6. Yi Liu, Li Wang, Qiang Yuan, Jianwei Peng (2023) “Effect of coarse aggregate on printability and mechanical properties of 3D printed concrete.” Construction and Building Materials. [Google Scholar]
  7. Jinggao Zhu, Xiaodan Ren, Miguel Cervera (2023) “Buildability modeling of 3D-printed concrete including printing deviation.” Construction and Building Materials. [Google Scholar]
  8. Liang Dong, Yekai Yang, Zhongxian Liu, Quanchang Ren, Jun L, Yan Zhang, Chengqing Wu (2022) “Microstructure and mechanical behavior of 3D printed ultra-high-performance concrete after elevated temperatures.” Additive Manufacturing. [Google Scholar]
  9. Lalit Kumar, Dhrutiman Dey, Biranchi Panda, Nelson Muthu (2024) “Experimental and numerical evaluation of multidirectional compressive and flexure behavior of three-dimensional printed concrete.” Frontiers of Structural and Civil Engineering. [Google Scholar]
  10. Luong Pham, Phuong Tran, Jay Sanjayan, Mohsen Saneian, Peihua Han, Shan Jin, Yong Bai (2020) “Steel fibers reinforced 3D printed concrete: Influence of fiber sizes on mechanical performance.” Construction and Building Materials. [Google Scholar]
  11. Arunothayan A R, Nematollahi B, Ranade R, Bong S H, Sanjayan J G, Khayat K H (2021) “Fiber orientation effects on ultra-high performance concrete formed by 3D printing.” Cem. Concr. Res., 143:106384. [CrossRef] [Google Scholar]
  12. Mehrab Nodehi, Federico Aguayo, Shahab Edin Nodehi, Aliakbar Gholampour, Togay Ozbakkaloglu, Osman Gencel (2022) “Durability properties of 3D printed concrete (3DPC).” Automation in Construction. [Google Scholar]
  13. Chen M, Yang L, Zheng Y, Li L, Wang S, Huang Y, Zhao P, Lu L, Cheng X (2021) “Rheological behaviors and structure build-up of 3D printed polypropylene and polyvinyl alcohol fiber-reinforced calcium sulphoaluminate cement composites.” J. Mater. Res. Technol., 10:1402–1414. [CrossRef] [Google Scholar]
  14. Chen Y, Rodriguez C R, Li Z, Chen B, C¸ opuroglu O, Schlangen E (2020) “Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing.” Cem. Concr. Compos., 114: 103708. [CrossRef] [Google Scholar]
  15. Guo X, Yang J, Xiong G (2020) “Influence of supplementary cementitious materials on rheological properties of 3D printed fly ash based geopolymer.” Cem. Concr. Compos., 114:103820. [CrossRef] [Google Scholar]
  16. Kaszyńska M, Skibicki S, Hoffmann M (2020) “3D concrete printing for sustainable construction.” Energies, 13(23):6351. [CrossRef] [Google Scholar]
  17. Rahul A V, Santhanam M, Meena H, Ghani Z (2019) “3D printable concrete: mixture design and test methods.” Cem. Concr. Compos., 97:13–23. [CrossRef] [Google Scholar]
  18. ASTM International, “ASTM C1437 Standard Test Method for Flow of Hydraulic Cement Mortar,” ASTM International, West Conshohocken, PA, 2022. [Google Scholar]
  19. ASTM International, “ASTM C109 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens),” ASTM International, West Conshohocken, PA, 2022. [Google Scholar]
  20. ASTM International, “ASTM C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars,” ASTM International, West Conshohocken, PA, 2022. [Google Scholar]
  21. Arunkumar, K., Muthukannan, M., Kumar, A. S., Ganesh, A. C., & Devi, R. K. (2022). Hybrid fibre reinforced eco-friendly geopolymer concrete made with waste wood ash: A mechanical characterization study. Engineering and Applied Science Research, 49(2), 235–247. https://doi.org/10.14456/easr.2022.26 [Google Scholar]
  22. Arunvivek, G. K., & Rameshkumar, D. (2022). Experimental Investigation on Feasibility of utilizing Phosphogypsum in E-Glass Fiber-incorporated Non-fired Ceramic Wall Tile. Journal of The Institution of Engineers (India): Series A, 103(2), 445–451. https://doi.org/10.1007/s40030-021-00604-2 [CrossRef] [Google Scholar]
  23. Sankar, B., & Ramadoss, P. (2023). Results in Control and Optimization Modelling the compressive strength of high-performance concrete containing metakaolin using distinctive statistical techniques. Results in Control and Optimization, 12(December 2022), 100241. https://doi.org/10.1016/j.rico.2023.100241 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.