Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Convective Heat Transfer in PWR, BWR, CANDU, SMR, and MSR Nuclear Reactors—A Review

Daria Sikorska, Julia Brzozowska, Agata Pawełkiewicz, Mateusz Psykała, Przemysław Błasiak and Piotr Kolasiński
Energies 17 (15) 3652 (2024)
https://doi.org/10.3390/en17153652

Measurement of the temperature of the fluid inside the tube based on the temperature measurement of the thermally insulated outer surface

Tomasz Sobota, Dawid Taler and Jan Taler
International Journal of Heat and Mass Transfer 228 125622 (2024)
https://doi.org/10.1016/j.ijheatmasstransfer.2024.125622

Numerical analysis of a steady-state and transient performance using a tube-in-tube heat exchanger unit for cryogenic process simulator

Vinit Shukla, Aafaq Alam, Nitin Shah, Hitensinh Vaghela and Parthasarathi Ghosh
Cryogenics 138 103801 (2024)
https://doi.org/10.1016/j.cryogenics.2024.103801

Innovative analysis of local and average air-side heat transfer coefficients in fin-and-tube heat exchangers using CFD and experimental method

Mateusz Marcinkowski, Dawid Taler, Jacek Sacharczuk, Katarzyna Węglarz and Jan Taler
Energy 309 133084 (2024)
https://doi.org/10.1016/j.energy.2024.133084

General numerical method for hydraulic and thermal modelling of the steam superheaters

Katarzyna Węglarz, Dawid Taler, Jan Taler and Mateusz Marcinkowski
Energy 291 130371 (2024)
https://doi.org/10.1016/j.energy.2024.130371

Advancements in analyzing air-side heat transfer coefficient on the individual tube rows in finned heat exchangers: Comparative study of three CFD methods

Mateusz Marcinkowski, Dawid Taler, Katarzyna Węglarz and Jan Taler
Energy 307 132754 (2024)
https://doi.org/10.1016/j.energy.2024.132754

Verification of the capacity of lubricating oil cooler system of turbine bearings

George T Pitchurov, Detelin Markov and Emanuil Georgiev
IOP Conference Series: Earth and Environmental Science 1128 (1) 012019 (2023)
https://doi.org/10.1088/1755-1315/1128/1/012019

Experimental validation of the dynamic thermal network approach in modeling buried pipes

Saleh S. Meibodi and Simon Rees
Science and Technology for the Built Environment 29 (6) 589 (2023)
https://doi.org/10.1080/23744731.2023.2222622

Numerical investigation of heat transfer enhancement in solar air heaters using polygonal-shaped ribs and grooves

B. Varun Kumar, Chithirai Pon Selvan, P. Rajesh Kanna, Dawid Taler, Magdalena Szymkiewicz and Jan Taler
Frontiers in Energy Research 11 (2023)
https://doi.org/10.3389/fenrg.2023.1279225

Comparative study of heat transfer and pressure drop in turbulent flow of a singular and hybrid nanofluids into a horizontal pipe

Maryam Mousavi, Parviz Darvishi and Abdolrasoul Pouranfard
Journal of Thermal Analysis and Calorimetry 148 (24) 14375 (2023)
https://doi.org/10.1007/s10973-023-12570-x

The Control of Lava Rheology on the Formation of Lunar Sinuous Rilles by Substrate Thermal Erosion: Topographic and Morphometric Relationships with Eruption Rates, Erosion Rates, Event Durations, and Erupted Magma Volumes

Lionel Wilson and James W. Head
The Planetary Science Journal 4 (11) 210 (2023)
https://doi.org/10.3847/PSJ/acfda3

Parabolic trough solar collector: A review on geometrical interpretation, mathematical model, and thermal performance augmentation

Raman Kumar Singh and Prakash Chandra
Engineering Research Express 5 (1) 012003 (2023)
https://doi.org/10.1088/2631-8695/acc00a

Numerical Modelling of Steam Superheaters in Supercritical Boilers

Katarzyna Węglarz, Dawid Taler, Jan Taler and Mateusz Marcinkowski
Energies 16 (6) 2615 (2023)
https://doi.org/10.3390/en16062615

Investigation of Thermo-Hydraulic Performances of Artificial Ribs Mounted in a Rectangular Duct

B. Varun Kumar, P. Rajesh Kanna, G. Manikandan, Dawid Taler, Jan Taler, Tomasz Sobota and Marzena Nowak-Ocłoń
Energies 16 (11) 4404 (2023)
https://doi.org/10.3390/en16114404

Experimental Investigation on the Effect of Semi-circular Perforated Baffles with Semi-circular Fins on Air–Water Double Pipe Heat Exchanger

Maha A. Hussein and Vinous M. Hameed
Arabian Journal for Science and Engineering 47 (5) 6115 (2022)
https://doi.org/10.1007/s13369-021-05869-0

Thermo-fluid analysis of a pentagonal ribbed triangular solar air heater duct (TSAHD): A three-dimensional numerical investigation

Yadaba Mahanand and Jnana Ranjan Senapati
International Communications in Heat and Mass Transfer 137 106258 (2022)
https://doi.org/10.1016/j.icheatmasstransfer.2022.106258

Analysis of Forced Convection with Hybrid Cu‐Al2O3 Nanofluids Injected in a Three‐Dimensional Rectangular Channel Containing Three Perpendicular Rotating Blocks with κ − ε Turbulent Modeling

S. H. Elhag, Abid A. Memon, M. Asif Memon, Kaleemullah Bhatti, Kavikumar Jacob, Samirah Alzahrani, Jamel Seidu and Zafar Said
Journal of Nanomaterials 2022 (1) (2022)
https://doi.org/10.1155/2022/2446972

A new approach to predict fouling using a transient CFD model and dynamic mesh

Juan Flores-Balderas, Jorge Alfaro-Ayala, Jose Ramirez-Minguela, Agustín Uribe-Ramírez and Oscar Lopez-Nunez
Thermal Science 26 (6 part B) 5001 (2022)
https://doi.org/10.2298/TSCI211206085F

Thermodynamic Analysis of a Small-scale Biomethane Liquefaction Process

P Tamburrano, M Salvatori, M Fedele, M Meschia, E Distaso, P De Palma and R Amirante
Journal of Physics: Conference Series 2385 (1) 012043 (2022)
https://doi.org/10.1088/1742-6596/2385/1/012043

The Forced Convection Analysis of Water Alumina Nanofluid Flow through a 3D Annulus with Rotating Cylinders via κ−ε Turbulence Model

Marei Saeed Alqarni, Abid Ali Memon, Haris Anwaar, Usman and Taseer Muhammad
Energies 15 (18) 6730 (2022)
https://doi.org/10.3390/en15186730

Efficacy of turbulent convective heat transfer in a circular tube with water-based nanoemulsion of n–Eicosane–An experimental study

C.J. Ho, Kun-Hung Lin, Tien-Fu Yang, Saman Rashidi and Wei-Mon Yan
International Journal of Heat and Mass Transfer 183 122062 (2022)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.122062

Effects of Experimental Parameters on Condensation Heat Transfer in Plate Fin Heat Exchanger

Sung-Hoon Seol, Sun-Geun Lee, Chang-Hyo Son, Ji-Hoon Yoon, In-Seob Eom, Young-Min Park and Jung-In Yoon
Energies 14 (22) 7681 (2021)
https://doi.org/10.3390/en14227681

Fundamental Concepts of Liquid-Propellant Rocket Engines

Alessandro de Iaco Veris
Springer Aerospace Technology, Fundamental Concepts of Liquid-Propellant Rocket Engines 63 (2021)
https://doi.org/10.1007/978-3-030-54704-2_2

Large Eddy Simulation of Turbulent Heat Transfer in Pipe Using NEK5000 Based on the Spectral Element Method and Uncertainty Quantification by GCI Estimation

Khanh Hoan Nguyen and Kyoungsik Chang
International Journal of Computational Fluid Dynamics 35 (3) 210 (2021)
https://doi.org/10.1080/10618562.2021.1926999

Optimization of parameters for air dehumidification systems including multilayer fixed-bed binder-free desiccant dehumidifier

Lili Yu, Jubair A. Shamim, Wei-Lun Hsu and Hirofumi Daiguji
International Journal of Heat and Mass Transfer 172 121102 (2021)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.121102

Experimental Study of Heat Transfer Enhancement in Solar Tower Receiver Using Internal Fins

Hashem Shatnawi, Chin Wai Lim, Firas Basim Ismail and Abdulrahman Aldossary
Computers, Materials & Continua 68 (2) 1693 (2021)
https://doi.org/10.32604/cmc.2021.016741

Direct conversion of CO2 to dimethyl ether in a fixed bed membrane reactor: Influence of membrane properties and process conditions

Serena Poto, Fausto Gallucci and M. Fernanda Neira d'Angelo
Fuel 302 121080 (2021)
https://doi.org/10.1016/j.fuel.2021.121080

Temperature error in a hydrostatic leveling system and its reduction

Roman V. Tsvetkov, Sergey V. Lekomtsev and Valery V. Yepin
Structural Control and Health Monitoring 28 (2) (2021)
https://doi.org/10.1002/stc.2668

Modeling and experimental validation and thermal performance assessment of a sun-tracked and cooled PVT system under low solar irradiation

Paweł Ocłoń, Piotr Cisek, Ewa Kozak-Jagieła, et al.
Energy Conversion and Management 222 113289 (2020)
https://doi.org/10.1016/j.enconman.2020.113289

Study of wall-to-bed heat transfer in circulating fluidized bed riser based on CFD simulation

Waritnan Wanchan, Parinya Khongprom and Sunun Limtrakul
Chemical Engineering Research and Design 156 442 (2020)
https://doi.org/10.1016/j.cherd.2020.02.021

Numerical and experimental investigation on thermal-hydraulic characteristics of a scroll expander for organic Rankine cycle

Jinwoo Oh, Hoyoung Jeong, Joonbyum Kim and Hoseong Lee
Applied Energy 278 115672 (2020)
https://doi.org/10.1016/j.apenergy.2020.115672

Produced Water Desalination via Pervaporative Distillation

Jingbo Wang, Dian Tanuwidjaja, Subir Bhattacharjee, Arian Edalat, David Jassby and Eric M. V. Hoek
Water 12 (12) 3560 (2020)
https://doi.org/10.3390/w12123560

Design of zero liquid discharge desalination (ZLDD) systems consisting of freeze desalination, membrane distillation, and crystallization powered by green energies

Kang Jia Lu, Zhen Lei Cheng, Jian Chang, Lin Luo and Tai-Shung Chung
Desalination 458 66 (2019)
https://doi.org/10.1016/j.desal.2019.02.001

Transient temperature calculation method for complex fluid-solid heat transfer problems with scattering boundary conditions

Peter Hölz, Thomas Böhlke and Thomas Krämer
Applied Thermal Engineering 149 1463 (2019)
https://doi.org/10.1016/j.applthermaleng.2018.12.081