Polyhedral meshing as an innovative approach to computational domain discretization of a cyclone in a fluidized bed CLC unit
E3S Web Conf., 14 (2017) 01027
Published online: 2017-03-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Secondary air induced flow structures and mixing in a fixed bed combustor
Awais Junejo, Sergio Chapela, Jacobo Porteiro and Yasir M Al-AbdeliProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 237 (7) 1479 (2023)
https://doi.org/10.1177/09576509231173010
On the Importance of Model Selection for CFD Analysis of High Temperature Gas-Solid Reactive Flow; Case Study: Post Combustion Chamber of HIsarna Off-Gas System
Ashkan Hosseini, Johannes L. T. Hage, Koen Meijer, Erik Offerman and Yongxiang YangProcesses 11 (3) 839 (2023)
https://doi.org/10.3390/pr11030839
CFD Modeling and Validation of Blast Furnace Gas/Natural Gas Mixture Combustion in an Experimental Industrial Furnace
Jorge Arroyo, Luis Pérez and Víctor Cuervo-PiñeraProcesses 11 (2) 332 (2023)
https://doi.org/10.3390/pr11020332
Computational Fluid Dynamics (CFD) Assessment of the Internal Flue Gases Recirculation (IFGR) Applied to Gas Microturbine in the Context of More Hydrogen-Enriched Fuel Use
Jean-Marc Fąfara and Norbert ModlińskiEnergies 16 (18) 6703 (2023)
https://doi.org/10.3390/en16186703
Preliminary in-silico analysis of vascular graft implantation configuration and surface modification
Ray Prather, Yashar Pourmoghadam, Joseph Fadhli, Faris Al-Mousily and Kamal PourmoghadamScientific Reports 13 (1) (2023)
https://doi.org/10.1038/s41598-023-42998-y
GTMesh: A Highly Efficient C++ Template Library for Numerical Schemes on General Topology Meshes
Tomáš Jakubec and Pavel StrachotaApplied Sciences 13 (15) 8748 (2023)
https://doi.org/10.3390/app13158748
Numerical study of internal flue gas recirculation system applied to methane-hydrogen powered gas microturbine combustor
Jean-Marc Fąfara and Norbert ModlińskiCombustion Engines 192 (1) 63 (2023)
https://doi.org/10.19206/CE-152236
Calculation method for determining the heat loss of the air environment when opening the passenger vehicle cabin doors
Artem V. Gevorkyan, Ivan V. Prokhorov and Dmitry O. ButarovichIzvestiya MGTU MAMI 17 (1) 51 (2023)
https://doi.org/10.17816/2074-0530-321203
Three-dimensional computational analysis of performance improvement in a novel designed solar photovoltaic/thermal system by using hybrid nanofluids
Hakan F. Oztop, A.Z. Sahin, Hakan Coşanay and I.H. SahinRenewable Energy 210 832 (2023)
https://doi.org/10.1016/j.renene.2023.04.115
Time-Averaged Analysis and Numerical Modelling of the Behavior of the Multiphase Flow and Liquid Lamella Thickness Inside an Internal-Mixing ACLR Nozzle
Miguel Ángel Ballesteros Martínez and Volker GaukelFlow, Turbulence and Combustion 110 (3) 601 (2023)
https://doi.org/10.1007/s10494-023-00406-5
Blockage of the Deep-Sea Mining Pump Transporting Large Particles with Different Sphericity
Shuang Teng, Can Kang, Ming-hui Li, Jin-yu Qiao and Ke-jin DingChina Ocean Engineering 37 (2) 343 (2023)
https://doi.org/10.1007/s13344-023-0028-0
The simulation of the emission of iron fumes caused by shielded metal arc welding using a computational fluid dynamics method
Fatemeh Paridokht, Shiva Soury and Sara Karimi ZeverdeganiToxicology and Industrial Health 39 (1) 36 (2023)
https://doi.org/10.1177/07482337221144143
Parametric investigation of an injection-jet self-powered Fontan circulation
Ray Prather, Arka Das, Michael Farias, Eduardo Divo, Alain Kassab and William DeCampliScientific Reports 12 (1) (2022)
https://doi.org/10.1038/s41598-022-05985-3
The numerical analysis of novel type conic vortex generator and comparison with known VGs for heat transfer enhancement
Huseyin Zahit Demirag, Mehmet Dogan and Atila Abir IgciHeat and Mass Transfer 58 (5) 735 (2022)
https://doi.org/10.1007/s00231-021-03117-7
CFD simulation of flow and mixing characteristics in a stirred tank agitated by improved disc turbines
Zhuotai Jia, Lele Xu, Xiaoxia Duan, Zai-Sha Mao, Qinghua Zhang and Chao YangChinese Journal of Chemical Engineering 50 95 (2022)
https://doi.org/10.1016/j.cjche.2022.05.017
Review of the State-of-the-Art Uses of Minimal Surfaces in Heat Transfer
Krzysztof Dutkowski, Marcin Kruzel and Krzysztof RokoszEnergies 15 (21) 7994 (2022)
https://doi.org/10.3390/en15217994
Effects of tail shapes/lengths of Hyperloop pod on aerodynamic characteristics and wave phenomenon
Thi Thanh Giang Le, Jihoon Kim, Minki Cho and Ryu JaiyoungAerospace Science and Technology 107962 (2022)
https://doi.org/10.1016/j.ast.2022.107962
In-silico analysis of outflow graft implantation orientation and cerebral thromboembolism incidence for full LVAD support
Ray Prather, Eduardo Divo, Alain Kassab and William DeCampliComputer Methods in Biomechanics and Biomedical Engineering 25 (11) 1249 (2022)
https://doi.org/10.1080/10255842.2021.2005789
Hybrid fictitious domain-immersed boundary solver coupled with discrete element method for simulations of flows laden with arbitrarily-shaped particles
Martin Isoz, Martin Kotouč Šourek, Ondřej Studeník and Petr KočíComputers & Fluids 244 105538 (2022)
https://doi.org/10.1016/j.compfluid.2022.105538
Numerical investigation of the internal flue gas recirculation system applied to methane powered gas microturbine combustor
Jean-Marc Fąfara and Norbert ModlińskiCombustion Engines (2021)
https://doi.org/10.19206/CE-141583
Study on the feasibility of the micromix combustion principle in low NO H2 burners for domestic and industrial boilers: A numerical approach
G. Lopez-Ruiz, I. Alava and J.M. BlancoEnergy 236 121456 (2021)
https://doi.org/10.1016/j.energy.2021.121456
On the effect of the correction of modelled airfoil tonal noise for a spanwise extension
Clarice du Plessis, Sybrand Johannes Van der Spuy and Hanno Carl Rudolf ReuterAerospace Science and Technology 107033 (2021)
https://doi.org/10.1016/j.ast.2021.107033
Optimizing wind barrier and photovoltaic array configuration in soiling mitigation
Kudzanayi Chiteka, Rajesh Arora, S.N. Sridhara and C.C. EnweremaduRenewable Energy 163 225 (2021)
https://doi.org/10.1016/j.renene.2020.08.155
Modeling mixing dynamics in uncovered baffled and unbaffled stirred tanks
Tomasz Płusa, Jan Talaga, Andrzej Duda and Piotr DudaAIChE Journal 67 (9) (2021)
https://doi.org/10.1002/aic.17322
CFD model for transient flow fields around teabag during tea infusion
Pallavee P. Dhekne and Ashwin W. PatwardhanFood and Bioproducts Processing 130 79 (2021)
https://doi.org/10.1016/j.fbp.2021.09.006
Bench Tests and CFD Simulations of Liquid–Gas Phase Separation Modeling with Simultaneous Liquid Transport and Mechanical Foam Destruction
Paweł Tomtas, Amadeusz Skwiot, Elżbieta Sobiecka, et al.Energies 14 (6) 1740 (2021)
https://doi.org/10.3390/en14061740
Numerical study on characteristics of biomass oxygen enriched gasification in the new gasifier on an experimental basis
Lijun Wang, Xiaocheng Du, Junqi Chen and Zhonggang WuRenewable Energy 179 815 (2021)
https://doi.org/10.1016/j.renene.2021.07.098
Heat transfer enhancement in pool boiling and condensation using h-BN/DCM and SiO2/DCM nanofluids: experimental and numerical comparison
Erdem Çiftçi and Adnan SözenInternational Journal of Numerical Methods for Heat & Fluid Flow 31 (1) 26 (2021)
https://doi.org/10.1108/HFF-02-2020-0113
Computational Fluid Dynamics Study of Cerebral Thromboembolism Risk in Ventricular Assist Device Patients: Effects of Pulsatility and Thrombus Origin
Ray Prather, Eduardo Divo, Alain Kassab and William DeCampliJournal of Biomechanical Engineering 143 (9) (2021)
https://doi.org/10.1115/1.4050819
Hemodynamic Abnormalities in the Aorta of Turner Syndrome Girls
Lauren Johnston, Ruth Allen, Pauline Hall Barrientos, Avril Mason and Asimina KazakidiFrontiers in Cardiovascular Medicine 8 (2021)
https://doi.org/10.3389/fcvm.2021.670841
Computational analysis of gas–liquid flow in an idealised CANDU reactor header under conditions that are relevant to small-break loss-of-coolant and loss-of-flow accidents
H. Sadeghi and S. TavoularisNuclear Engineering and Design 378 111054 (2021)
https://doi.org/10.1016/j.nucengdes.2021.111054
A Numerical Study on Performance Improvement in Boiling Heat Transfer via Dichloromethane-Based Nanofluid Utilization
Erdem ÇİFTÇİ and Adnan SÖZENPoliteknik Dergisi 23 (3) 849 (2020)
https://doi.org/10.2339/politeknik.697085
Influence of different parameters on the tube-to-bed heat transfer coefficient in a gas-solid fluidized bed heat exchanger
Priscilla Corrêa Bisognin, Jaci Carlo Schramm Câmara Bastos, Henry França Meier, Natan Padoin and Cíntia SoaresChemical Engineering and Processing - Process Intensification 147 107693 (2020)
https://doi.org/10.1016/j.cep.2019.107693
CFD modelling of the air conditioning system for a Tier 2 Data Centre
Paula Pico, Juan Pablo Valdés, Andres Pinilla, et al.Advances in Building Energy Research 1 (2020)
https://doi.org/10.1080/17512549.2020.1860818
Modeling of the Chemical Looping Combustion of Hard Coal and Biomass Using Ilmenite as the Oxygen Carrier
Anna Zylka, Jaroslaw Krzywanski, Tomasz Czakiert, et al.Energies 13 (20) 5394 (2020)
https://doi.org/10.3390/en13205394
Effects of wall temperature on methane MILD combustion and heat transfer behaviors with non-preheated air
Shunta Xu, Yaojie Tu, Pu Huang, et al.Applied Thermal Engineering 174 115282 (2020)
https://doi.org/10.1016/j.applthermaleng.2020.115282
Optimization of air-water microchannel heat exchanger using response surface methodology
Vladimir Glazar, Anica Trp and Kristian LenicInternational Journal of Heat and Mass Transfer 157 119887 (2020)
https://doi.org/10.1016/j.ijheatmasstransfer.2020.119887
Effects of inserted sphere on thermal field and heat-transfer characteristics of face-centered-cubic-structured pebble bed
Leisheng Chen and Jaeyoung LeeApplied Thermal Engineering 172 115151 (2020)
https://doi.org/10.1016/j.applthermaleng.2020.115151
Study on the Key Technology of CO2 Compression and Purification in Oxy-Fuel Combustion Coal-Fired Power Plant
Haibo Wu, Jinhua Wu, Yanbing Li and Jianchong ShenEnergy & Fuels 33 (4) 3349 (2019)
https://doi.org/10.1021/acs.energyfuels.8b04038
Numerical Analysis of Flow in Building Arrangement: Computational Domain Discretization
Marcin Sosnowski, Renata Gnatowska, Karolina Grabowska, Jarosław Krzywański and Arkadiusz JamrozikApplied Sciences 9 (5) 941 (2019)
https://doi.org/10.3390/app9050941
High-Efficiency Nose-to-Lung Aerosol Delivery in an Infant: Development of a Validated Computational Fluid Dynamics Method
Karl Bass, Susan Boc, Michael Hindle, Kelley Dodson and Worth LongestJournal of Aerosol Medicine and Pulmonary Drug Delivery 32 (3) 132 (2019)
https://doi.org/10.1089/jamp.2018.1490
Effect of gas inlet parameters on exergy transfer performance of sinter cooling process in vertical moving bed
Junsheng Feng, Sheng Zhang, Hui Dong and Gang PeiApplied Thermal Engineering 152 126 (2019)
https://doi.org/10.1016/j.applthermaleng.2019.02.059
Steady-state simulation of internal heat-transfer characteristics in a double tube reactor
Yong Bai, Hui Si and Xiao WangChemical Engineering and Processing - Process Intensification 144 107642 (2019)
https://doi.org/10.1016/j.cep.2019.107642
Numerical simulation and experimental analysis on nitrogen and sulfur oxides emissions during the co-combustion of Longyan anthracite and sawmill sludge
Zili Zhang and Qinda ZengFuel 254 115611 (2019)
https://doi.org/10.1016/j.fuel.2019.06.019
Experimental and numerical study on enhancement of heat transfer characteristics of a heat pipe utilizing aqueous clinoptilolite nanofluid
Adnan Sözen, Metin Gürü, Ataollah Khanlari and Erdem ÇiftçiApplied Thermal Engineering 160 114001 (2019)
https://doi.org/10.1016/j.applthermaleng.2019.114001
Numerical simulation of NO emission characteristics of a high-speed and high-temperature heat-airflow test system
Chaozhi Cai, Lubin Guo, Jiachen Liu and Zhenyu WeiJournal of Physics: Conference Series 1303 (1) 012026 (2019)
https://doi.org/10.1088/1742-6596/1303/1/012026
Numerical simulation and experimental investigation of heat transfer and flow structures around heated spherical bluff bodies
A H Abed, S E Shcheklein and V M PakhaluevJournal of Physics: Conference Series 1333 (3) 032002 (2019)
https://doi.org/10.1088/1742-6596/1333/3/032002
Heat transfer performance investigation on a finned tube adsorbent bed with a compound parabolic concentrator (CPC) for solar adsorption refrigeration
Chong Zhao, Yunfeng Wang, Ming Li and Wenping DuApplied Thermal Engineering 152 391 (2019)
https://doi.org/10.1016/j.applthermaleng.2019.02.063
Polyhedral meshing in numerical analysis of conjugate heat transfer
Marcin Sosnowski, Jaroslaw Krzywanski, Karolina Grabowska, Renata Gnatowska and P. DančováEPJ Web of Conferences 180 02096 (2018)
https://doi.org/10.1051/epjconf/201818002096
Genetic algorithms and neural networks in optimization of sorbent enhanced H2 production in FB and CFB gasifiers
Jaroslaw Krzywanski, Hongtao Fan, Yi Feng, Abdul Rahim Shaikh, Mengxiang Fang and Qinhui WangEnergy Conversion and Management 171 1651 (2018)
https://doi.org/10.1016/j.enconman.2018.06.098
Combustion interactions of blended coals in an O2/CO2 mixture in a drop-tube furnace: Experimental investigation and numerical simulation
Lun Ma, Anlong Guo, Qingyan Fang, et al.Applied Thermal Engineering 145 184 (2018)
https://doi.org/10.1016/j.applthermaleng.2018.09.033
CFD-model to predict the local and time-dependent scale formation of steels in air- and oxygen enriched combustion atmospheres
C. Schluckner, C. Gaber, M. Demuth, et al.Applied Thermal Engineering 143 822 (2018)
https://doi.org/10.1016/j.applthermaleng.2018.08.010
Polyhedral meshing in numerical analysis of conjugate heat transfer
Marcin Sosnowski, Jaroslaw Krzywanski, Karolina Grabowska, Renata Gnatowska and P. DančováEPJ Web of Conferences 180 02096 (2018)
https://doi.org/10.1051/epjconf/201817002096
Computational domain discretization in numerical analysis of flow within granular materials
Marcin Sosnowski and P. DančováEPJ Web of Conferences 180 02095 (2018)
https://doi.org/10.1051/epjconf/201817002095
Computational domain discretization in numerical analysis of flow within granular materials
Marcin Sosnowski and P. DančováEPJ Web of Conferences 180 02095 (2018)
https://doi.org/10.1051/epjconf/201818002095
Numerical modelling of flow field within a packed bed of granular material
Marcin Sosnowski, Renata Gnatowska, Jacek Sobczyk and Waldemar WodziakJournal of Physics: Conference Series 1101 012036 (2018)
https://doi.org/10.1088/1742-6596/1101/1/012036
The influence of distance between vehicles in platoon on aerodynamic parameters
Renata Gnatowska, Marcin Sosnowski and P. DančováEPJ Web of Conferences 180 02030 (2018)
https://doi.org/10.1051/epjconf/201818002030