EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues E3S Web Conf., 14 (2017) 01040 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Methodology for Cost Estimation Using Characteristic Factors in Additive Manufacturing

Karim Asami, Dirk Herzog, Torben Deutschmann, Tim Röver, Ingomar Kelbassa and Claus Emmelmann
Journal of the Japan Society of Powder and Powder Metallurgy 72 (Supplement) S75 (2025)
https://doi.org/10.2497/jjspm.14B-T6-02

Ten questions concerning the integration of digital fabrication techniques into the architectural design process

Asmaa Gamal, Basma Nashaat, Merhan M. Shahda and Shaimaa R. Nosier
Architectural Engineering and Design Management 20 (1) 120 (2024)
https://doi.org/10.1080/17452007.2023.2269559

Energy Efficiency in Additive Manufacturing: Condensed Review

Ismail Fidan, Vivekanand Naikwadi, Suhas Alkunte, Roshan Mishra and Khalid Tantawi
Technologies 12 (2) 21 (2024)
https://doi.org/10.3390/technologies12020021

3D-printed metals: Process parameters effects on mechanical properties of 17-4 P H stainless steel

Francesca Romana Andreacola, Ilaria Capasso, Antonio Langella and Giuseppe Brando
Heliyon 9 (7) e17698 (2023)
https://doi.org/10.1016/j.heliyon.2023.e17698

A Modelling-Based Framework for Carbon Emissions Calculation in Additive Manufacturing: A Stereolithography Case Study

Vasiliki C. Panagiotopoulou, Aikaterini Paraskevopoulou and Panagiotis Stavropoulos
Processes 11 (9) 2574 (2023)
https://doi.org/10.3390/pr11092574

Maximizing Energy Efficiency in Additive Manufacturing: A Review and Framework for Future Research

Gokan May and Foivos Psarommatis
Energies 16 (10) 4179 (2023)
https://doi.org/10.3390/en16104179

Achieving Sustainability in Manufacturing through Additive Manufacturing: An Analysis of Its Enablers

Mohammed Balubaid and Naif Alsaadi
Sustainability 15 (12) 9504 (2023)
https://doi.org/10.3390/su15129504

A conceptual framework for layerwise energy prediction in laser-based powder bed fusion process using machine learning

Shradha Ghansiyal, Li Yi, Johanna Steiner-Stark, Marius Marvin Müller, Benjamin Kirsch, Moritz Glatt and Jan C. Aurich
Procedia CIRP 116 7 (2023)
https://doi.org/10.1016/j.procir.2023.02.002

Strain-rate response of 3D printed 17-4PH stainless steel manufactured via selective laser melting

Giuseppe Brando, Francesca Romana Andreacola, Ilaria Capasso, Daniele Forni and Ezio Cadoni
Construction and Building Materials 409 133971 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.133971

The Orientation and High-Quality Effect of Deposit Layer to Surface Roughness on FDM 3D Printed Part

Redyarsa Dharma Bintara, Yanuar Rohmat Aji Pradana, Aminnudin Aminnudin and Heru Suryanto
Key Engineering Materials 940 95 (2023)
https://doi.org/10.4028/p-29nh6i

Comparison of energy consumption of ABS and PLA while 3 D printing with fused deposition modeling process

Shubhada Warke and V.S. Puranik
Materials Today: Proceedings 66 2098 (2022)
https://doi.org/10.1016/j.matpr.2022.05.509

Energy performance-oriented design candidate selection approach for additive manufacturing using toolpath length comparison method

Li Yi, Bahram Ravani and Jan C. Aurich
Manufacturing Letters 33 5 (2022)
https://doi.org/10.1016/j.mfglet.2022.06.001

An Exploratory Study on the Accuracy of Parts Printed in FDM Processes from Novel Materials

Halina Nieciąg, Rafał Kudelski, Piotr Dudek and Jacek Cieślik
Acta Mechanica et Automatica 14 (1) 59 (2020)
https://doi.org/10.2478/ama-2020-0009