| Issue |
E3S Web Conf.
Volume 8, 2016
Mineral Engineering Conference MEC2016
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/e3sconf/20160801040 | |
| Published online | 16 September 2016 | |
Hard coal preparation in a single stage crushing circuit for gasification purposes
AGH, University of Science and Technology, Faculty of Mining and Geoengineering, Department of Mineral Processing and Environmental Engineering
a Corresponding author: dsaramak@agh.edu.pl
The article concerned the problem of coal preparation for gasification purposes. The main aim was to design the coal crushing circuit, which would produce the material within the particle size range between 0.5 and 5 mm. The one-stage crushing circuit based on hammer crusher was proposed. There laboratory tests of coal crushing in two circuits: one-stage circuit based on a hammer crusher and two-stage circuit based on jaw and roller crushers were also performed. The results showed that application of the one-stage circuit appeared to be more favorable both in terms of energy consumption and, if considered, the product particle size.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.