| Issue |
E3S Web Conf.
Volume 8, 2016
Mineral Engineering Conference MEC2016
|
|
|---|---|---|
| Article Number | 01065 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/20160801065 | |
| Published online | 16 September 2016 | |
Role of classification in grinding using the electromagnetic mill. A case study
1 AGH University of Science and Technology, Faculty of Mining and Geoengineering, Department of Environmental Engineering and Mineral Processing, Poland
2 Silesian University of Technology, Faculty of Automatic Control, Electronics and Computer Science, Institute of Automatic Control, Poland
a Corresponding author: wolosiewiczm@gmail.com
In the process of classification, one of the methods used to evaluate the effectiveness classifiers is to plot a separation curve, which determines the size of seprated particles and characterizes the process accuracy. The article presents an assessment of the impact of parameters on grinding and classification using an electromagnetic mill. The results allow a detailed assessment of the effectiveness and efficiency of the device and facilitate the optimization of the grinding process by establishing an appropriate control algorithms.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.