E3S Web of Conferences

Open Access

Optimization of operating variables for production of ultra-fine talc in a stirred mill. Specific surface area investigations 01001

Oner Yusuf Toraman

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801001

PDF (41.01 KB)

Open Access

Determination of optimal flotation conditions of low-grade graphite ore 01002

Özcan Öney and Selçuk Samanli

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801002

Open Access

A laboratory study to evaluate the possibility of sulphur and phosphorous removal from iron ore concentrate by leaching 01003

Hassan Rezvani Pour, Ali Mostafavi, Tayebeh Shams Pour, Ghobad Ebadi Pour and Amir Haji Zadeh Omran

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801003

PDF (39.86 KB)

Open Access

Flotation of hard coal in saline water 01004

Anna Mlynarczykowska, Agnieszka Nowak and Klaudia Tupek

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801004

Open Access

Dry grinding of talc in a stirred ball mill 01005

Serkan Cayirli

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801005

Open Access

Effect of process variables on oxidative pressurized acid leaching of copper electrorefining anode slimes 01006

Sipi Seisko, Jari Aromaa, Petri Latostenmaa, Olof Forsen and Mari Lundstrom

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801006

Open Access

Effect of process variables on synthesis of MgB₂ by a high energy ball mill 01007

Haldun Kurama, Savaş Erkuş and Hakan Gaşan

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801007

PDF (44.99 KB)

Open Access

The contributions of combustion of different hard steam coal size grades to overall potential mercury emission in Poland 01008

Ireneusz Pyka and Krzysztof Wierzchowski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801008

Open Access

Separation of copper flotation concentrates into density fractions by means of polytungstate aqueous solution 01009

Andrzej Luszczkiewicz, Piotr Karwowski, Antoni Muszer and Jan Drzymala

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801009

Open Access

Linking impact-related progeny sizes of cement clinker to modes of single-particle breakage 01010

Mahmut Camalan and Çetin Hoşten

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801010

Open Access

Morphology of flotation froth for enrichment of coal in saline water 01011

Anna Mlynarczykowska, Klaudia Tupek and Konrad Oleksik

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801011

Open Access

Dispersion of air bubbles in a flotation cell under predetermined hydrodynamic conditions 01012

Anna Mlynarczykowska, Konrad Oleksik and Klaudia Tupek

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801012

Open Access

Assessment of soda ash calcination treatment of Turkish trona ore 01013

Sibel Gezer and Umit Atalay

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801013

Open Access

Flotation of kaolinite from tailings of kaolin-washing plants by cationic collectors 01014

Kianoush Barani

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801014

Open Access

Value-added materials from the hydrometallurgical processing of jarosite waste 01015

Benjamin P. Wilson, Petteri Halli, Inka Orko, Petteri Kangas, Mari Lundström and Petteri Koukkari

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801015

Open Access

Studies of extractive removal of silver(I) from chloride solutions 01016

Katarzyna Wejman-Gibas and Magdalena Pilsniak-Rabiega

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801016

Open Access

Separation of mercury in industrial processes of Polish hard steam coals cleaning 01017

Krzysztof Wierzchowski and Ireneusz Pyka

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801017

Open Access

Spherical agglomeration of acetylsalicylic acid 01018

Izabela Polowczyk and Karolina Szczesniak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801018

Open Access

Effect of foamability index of short chain alkyl amines on flotation of quartz 01019

Sabina Szczerkowska, Marta Siedlarz, Marta Wojcik and Przemyslaw B. Kowalczuk

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801019

PDF (41.19 KB)

Open Access

Current State, Improvements and Latest Trends Incoal Preparation in Poland 01020

Wiesław S. Blaschke, Ireneusz Baic and Józef Szafarczyk

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801020

Open Access

Leaching kinetics of gibbsitic bauxite with sodium hydroxide 01021

El-Sayed A. Abdel-Aal

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801021

Open Access

Origin of colour after firing feldspar-quartz raw material from the Sobotka region (Lower Silesia, SW Poland) 01022

Ewa Lewicka

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801022

Open Access

Evaluation of the effects of coal grinding in terms of coal water slurry preparation 01023

Jolanta Robak, Karina Ignasiak and Michał Rejdak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801023

PDF (42.81 KB)

Open Access

Flow resistance reduction of coal water slurry through gas phase addition 01024

Jolanta Robak and Karina Ignasiak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801024

PDF (39.73 KB)

Open Access

Performance of 500 m³ TankCell® at Kevitsa Cu-Ni-PGM concentrator 01025

Toni Mattsson, Tomi Maksimainen, Rodrigo Grau and Antti Rinne

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801025

PDF (39.04 KB)

Open Access

Pilot-scale recovery of rare earths and scandium from phosphogypsum and uranium leachates 01026

Maxim Mashkovtsev, Maxim Botalov, Denis Smyshlyaev, Risto Pajarre, Petteri Kangas, Vladimir Rychkov and Pertti Koukkari

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801026

Open Access

Multiphase simulation of mine waters and aqueous leaching processes 01027

Risto Pajarre, Petteri Kangas, Karri Penttilä and Pertti Koukkari

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801027

Open Access

Mathematical models of hydrocyclone performance in various copper ores preparation circuits 01028

Tomasz Niedoba, Tadeusz Tumidajski and Agnieszka Surowiak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801028

Open Access

Bacterial bioleaching of low grade nickel limonite and saprolite ores by mixotrophic bacteria 01029

Siti Khodijah Chaerun, Siti Aisyah Alting, Mohammad Zaki Mubarok and Edy Sanwani

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801029

PDF (45.48 KB)

Open Access

Influence of flotation cell volume and solids mass on kinetics of sulfide ore flotation 01030

Michal Plawski and Alicja Bakalarz

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801030

Open Access

Preliminary study on collectorless flotation of chalcocite, bornite and copper-bearing shale in the presence of selected frothers 01031

Jan Drzymala, Alicja Swebodzinska, Magdalena Duchnowska, Alicja Bakalarz, Andrzej Luszczkiewicz and Przemyslaw B. Kowalczuk

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801031

Open Access

Purification of Dunino halloysite by H₂SO₄ leaching and magnetic separation 01032

Piotr Sakiewicz and Marcin A. Lutynski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801032

Open Access

Local and global assessment of flotation kinetics 01033

Tomasz Ratajczak, Jan Drzymala and Przemyslaw B. Kowalczuk

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801033

Open Access

Monitoring of the pulsation cycle in a jig using a radiometric density meter 01034

Stanislaw Cierpisz and Jaroslaw Joostberens

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801034

Open Access

Application of the shrinking core model for dissolution of serpentinite in an acid solution 01035

Agnieszka Didyk-Mucha, Agnieszka Pawlowska and Zygmunt Sadowski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801035

Open Access

Multidimensional statistical and visualization methods in description of grained materials 01036

Tomasz Niedoba, Paulina Pieta, Agnieszka Surowiak and Dariusz Jamroz

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801036

Open Access

Optimisation Platform for copper ore processing at the Division of Concentrator of KGHM Polska Miedz S.A. 01037

Bogdan Kuzba, Witold Pawlos, Andrzej Konieczny and Malgorzata Krzeminska

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801037

Open Access

Research on choice of xanthates blend dedicated to processing technology at KGHM Polska Miedz S.A. concentrators 01038

Witold Pawlos, Andrzej Konieczny and Malgorzata Krzeminska

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801038

Open Access

Evaluation of bioleaching column test of sulphide copper ore and copper concentrate using preconditioned surface 01039

Alvaro Videla Leiva and Mario Vera Vélizand

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801039

PDF (37.13 KB)

Open Access

Hard coal preparation in a single stage crushing circuit for gasification purposes 01040

Bartlomiej Ryszka and Daniel Saramak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801040

Open Access

Improving gravel and crushed aggregates washing technology efficiency through application of high pressure washer 01041

Jaroslaw Lagowski and Daniel Saramak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801041

Open Access

Flotation of zinc and lead oxide minerals from Olkusz region calamine ores 01042

Krystian Cichy, Cezary Regula and Grazyna Pajor

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801042

Open Access

Solvent extraction of scandium from lateritic nickel- cobalt ores using different organic reagents 01043

Ece Ferizoğlu, Şerif Kaya and Yavuz A. Topkaya

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801043

PDF (44.72 KB)

Open Access

Leaching of pyrite in cupric chloride solution 01044

Heini Elomaa and Mari Lundström

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801044

Open Access

The effect of feed overload at secondary coal separation with product recirculation 01045

Sergiusz Boron, Adam Heyduk and Joachim Pielot

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801045

Open Access

Production value optimization with intermediate jig product recirculation 01046

Joachim Pielot

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801046

Open Access

Sensitivity problems of control system of coal preparation processes 01047

Roman Kaula

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801047

Open Access

Stability of green tea nanoscale zero-valent iron 01048

Tomasz Suponik, Marcin Lemanowicz and Pawel Wrona

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801048

Open Access

Challenges related to flotation cleaning of oil shales. Issues due to compositional and surface features and post-grinding surface behavior 01049

N. Emre Altun

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801049

Open Access

Viscosity and density models for copper electrorefining electrolytes 01050

Taina Kalliomäki, Arif T. Aji, Jari Aromaa and Mari Lundström

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801050

Open Access

Separation of ultrafine particles from class F fly ashes 01051

Ilker Acar, Thomas L. Robl and M. Umit Atalay

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801051

Open Access

Coal recovery from a coal waste dump 01052

Zenon Rozanski, Tomasz Suponik, Piotr Matusiak, Daniel Kowol, Jan Szpyrka, Michal Mazurek and Pawel Wrona

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801052

Open Access

Total gas in-place calculations for the Baltic-Podlasie-Lublin basin shales in Poland 01053

Marcin A. Lutynski and Miguel A. Gonzalez Gonzalez

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801053

Open Access

Carbon dioxide sorption on EDTA modified halloysite 01054

Patrycja Waszczuk, Marcin Lutynski, Miguel A. Gonzalez Gonzalez, Adam Smolinski and Natalia Howaniec

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801054

Open Access

Current methods and possibilities to determine the variability of Cu content in the copper ore on a conveyor belt in one of KGHM Polska Miedz S.A. mines 01055

Leszek Jurdziak, Witold Kawalec and Robert Krol

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801055

Open Access

Coal waste slurries as a fuel for integrated gasification combined cycle plants 01056

Marcin A. Lutynski and Aleksander Lutynski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801056

Open Access

Granulometric composition study of mineral resources using opto-electronic devices and Elsieve software system 01057

Stanislaw Kaminski, Piotr Kaminski, Dorota Kaminska and Jerzy Trzcinski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801057

Open Access

Project DISIRE (H2020) – an idea of annotating of ore with sensors in KGHM Polska Miedz S.A. underground copper ore mines 01058

Witold Kawalec, Robert Krol, Radoslaw Zimroz, Leszek Jurdziak, Marek Jach and Radoslaw Pilut

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801058

Open Access

Impact of inorganic salts on behaviour of air bubbles in aqueous solutions 01059

Danuta Szyszka

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801059

PDF (37.60 KB)

Open Access

Bulk density estimation using a 3-dimensional image acquisition and analysis system 01060

Adam Heyduk

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801060

Open Access

Application of a rapid methodology for preliminary appraisal of kaolinite deposits 01061

Mahir Can Cetin and N. Emre Altun

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801061

Open Access

Control of clay minerals effect in flotation. A review 01062

Hasan Ali Taner and Vildan Onen

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801062

Open Access

World production and possible recovery of cobalt from the Kupferschiefer stratiform copper ore 01063

Paulina M. Pazik, Tomasz Chmielewski, Hylke J. Glass and Przemyslaw B. Kowalczuk

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801063

Open Access

Technology of Polish copper ore beneficiation – perspectives from the past experience 01064

Andrzej Wieniewski and Bozena Skorupska

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801064

Open Access

Role of classification in grinding using the electromagnetic mill. A case study 01065

Marta Wolosiewicz-Glab, Dariusz Foszcz, Tomasz Gawenda and Szymon Ogonowski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801065

Open Access

Design of an electromagnetic mill. Its technological and control system structures for dry milling 01066

Marta Wolosiewicz-Glab, Dariusz Foszcz, Tomasz Gawenda and Szymon Ogonowski

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801066

Open Access

A phenomenological model for improving understanding of the ammonium nitrate agglomeration process 01067

Alvaro Videla Leiva and Catalina Polanco Palacios

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801067

PDF (36.27 KB)

Open Access

Aggregates from mineral wastes 01068

Ireneusz Baic, Wieslaw Koziol and Lukasz Machniak

Published online: 16 September 2016

DOI: https://doi.org/10.1051/e3sconf/20160801068

E3S Web of Conferences

Volume 8 (2016)

Mineral Engineering Conference MEC2016

Statement of Peer review

Optimization of operating variables for production of ultra-fine talc in a stirred mill. Specific surface area investigations 01001

Determination of optimal flotation conditions of low-grade graphite ore 01002

A laboratory study to evaluate the possibility of sulphur and phosphorous removal from iron ore concentrate by leaching 01003

Flotation of hard coal in saline water 01004

Dry grinding of talc in a stirred ball mill 01005

Effect of process variables on oxidative pressurized acid leaching of copper electrorefining anode slimes 01006

Effect of process variables on synthesis of MgB2 by a high energy ball mill 01007

The contributions of combustion of different hard steam coal size grades to overall potential mercury emission in Poland 01008

Separation of copper flotation concentrates into density fractions by means of polytungstate aqueous solution 01009

Linking impact-related progeny sizes of cement clinker to modes of single-particle breakage 01010

Morphology of flotation froth for enrichment of coal in saline water 01011

Dispersion of air bubbles in a flotation cell under predetermined hydrodynamic conditions 01012

Assessment of soda ash calcination treatment of Turkish trona ore 01013

Flotation of kaolinite from tailings of kaolin-washing plants by cationic collectors 01014

Value-added materials from the hydrometallurgical processing of jarosite waste 01015

Studies of extractive removal of silver(I) from chloride solutions 01016

Separation of mercury in industrial processes of Polish hard steam coals cleaning 01017

Spherical agglomeration of acetylsalicylic acid 01018

Effect of foamability index of short chain alkyl amines on flotation of quartz 01019

Current State, Improvements and Latest Trends Incoal Preparation in Poland 01020

Leaching kinetics of gibbsitic bauxite with sodium hydroxide 01021

Origin of colour after firing feldspar-quartz raw material from the Sobotka region (Lower Silesia, SW Poland) 01022

Evaluation of the effects of coal grinding in terms of coal water slurry preparation 01023

Flow resistance reduction of coal water slurry through gas phase addition 01024

Performance of 500 m3 TankCell® at Kevitsa Cu-Ni-PGM concentrator 01025

Pilot-scale recovery of rare earths and scandium from phosphogypsum and uranium leachates 01026

Multiphase simulation of mine waters and aqueous leaching processes 01027

Mathematical models of hydrocyclone performance in various copper ores preparation circuits 01028

Bacterial bioleaching of low grade nickel limonite and saprolite ores by mixotrophic bacteria 01029

Influence of flotation cell volume and solids mass on kinetics of sulfide ore flotation 01030

Preliminary study on collectorless flotation of chalcocite, bornite and copper-bearing shale in the presence of selected frothers 01031

Purification of Dunino halloysite by H2SO4 leaching and magnetic separation 01032

Local and global assessment of flotation kinetics 01033

Monitoring of the pulsation cycle in a jig using a radiometric density meter 01034

Application of the shrinking core model for dissolution of serpentinite in an acid solution 01035

Multidimensional statistical and visualization methods in description of grained materials 01036

Optimisation Platform for copper ore processing at the Division of Concentrator of KGHM Polska Miedz S.A. 01037

Research on choice of xanthates blend dedicated to processing technology at KGHM Polska Miedz S.A. concentrators 01038

Evaluation of bioleaching column test of sulphide copper ore and copper concentrate using preconditioned surface 01039

Hard coal preparation in a single stage crushing circuit for gasification purposes 01040

Improving gravel and crushed aggregates washing technology efficiency through application of high pressure washer 01041

Flotation of zinc and lead oxide minerals from Olkusz region calamine ores 01042

Solvent extraction of scandium from lateritic nickel- cobalt ores using different organic reagents 01043

Leaching of pyrite in cupric chloride solution 01044

The effect of feed overload at secondary coal separation with product recirculation 01045

Production value optimization with intermediate jig product recirculation 01046

Sensitivity problems of control system of coal preparation processes 01047

Stability of green tea nanoscale zero-valent iron 01048

Challenges related to flotation cleaning of oil shales. Issues due to compositional and surface features and post-grinding surface behavior 01049

Viscosity and density models for copper electrorefining electrolytes 01050

Separation of ultrafine particles from class F fly ashes 01051

Coal recovery from a coal waste dump 01052

Total gas in-place calculations for the Baltic-Podlasie-Lublin basin shales in Poland 01053

Carbon dioxide sorption on EDTA modified halloysite 01054

Current methods and possibilities to determine the variability of Cu content in the copper ore on a conveyor belt in one of KGHM Polska Miedz S.A. mines 01055

Coal waste slurries as a fuel for integrated gasification combined cycle plants 01056

Granulometric composition study of mineral resources using opto-electronic devices and Elsieve software system 01057

Project DISIRE (H2020) – an idea of annotating of ore with sensors in KGHM Polska Miedz S.A. underground copper ore mines 01058

Impact of inorganic salts on behaviour of air bubbles in aqueous solutions 01059

Bulk density estimation using a 3-dimensional image acquisition and analysis system 01060

Application of a rapid methodology for preliminary appraisal of kaolinite deposits 01061

Control of clay minerals effect in flotation. A review 01062

World production and possible recovery of cobalt from the Kupferschiefer stratiform copper ore 01063

Technology of Polish copper ore beneficiation – perspectives from the past experience 01064

Role of classification in grinding using the electromagnetic mill. A case study 01065

Design of an electromagnetic mill. Its technological and control system structures for dry milling 01066

A phenomenological model for improving understanding of the ammonium nitrate agglomeration process 01067

Aggregates from mineral wastes 01068

Effect of process variables on synthesis of MgB₂ by a high energy ball mill 01007

Performance of 500 m³ TankCell® at Kevitsa Cu-Ni-PGM concentrator 01025

Purification of Dunino halloysite by H₂SO₄ leaching and magnetic separation 01032