Simulation of fuel demand for wood-gas in combustion engine

¹ Warsaw University Of Life Sciences, Faculty of Production Engineering, Department of Production Organization and Engineering, Nowoursynowska 164, Warsaw, Poland
² Warsaw University Of Life Sciences, Faculty of Production Engineering, Department of Production Organization and Engineering, Nowoursynowska 164, Warsaw, Poland
³ Warsaw University Of Life Sciences, Faculty of Production Engineering, Department of Production Organization and Engineering, Nowoursynowska 164, Warsaw, Poland
⁴ Warsaw University Of Life Sciences, Faculty of Production Engineering, Department of Production Organization and Engineering, Nowoursynowska 164, Warsaw, Poland

^⁎ Corresponding author: katarzyna_botwinska@sggw.pl

Abstract

In the era of the oil crisis and proceeding contamination of the natural environment, it is attempted to substitute fossil raw materials with alternative carriers. For many years, road transport has been considered as one of the main sources of the substances deteriorating air quality. Applicable European directives oblige the member states to implement biofuels and biocomponents into the general fuel market, however, such process is proceeding gradually and relatively slowly. So far, alternative fuels have been used on a large scale to substitute diesel fuel or petrol. Derivatives of vegetable raw materials, such as vegetable oils or their esters and ethanol extracted from biomass, are used to that end. It has been noticed that there is no alternative to LPG which, due to financial reasons, is more and more popular as fuel in passenger cars. In relation to solutions adopted in the past, it has been decided to analyse the option of powering a modern passenger car with wood gas - syngas. Such fuel has been practically used since the 1920's. To that end, a computer simulation created in SciLab environment was carried out. Passenger car Fiat Seicento, fitted with Fire 1.1 8V petrol engine with power of 40kW, whose parameters were used to prepare the model, was selected as the model vehicle. The simulation allows the determination of engine demand on the given fuel. Apart from the wood gas included in the title, petrol, methane and LPG were used. Additionally, the created model enables the determination of the engine power at the time of the indicated fuels supply. The results obtained in the simulation revealed considerable decrease in the engine power when the wood gas was supplied and the increased consumption of this fuel. On the basis of the analysis of the professional literature describing numerous inconveniences connected with the use of this fuel as well as the obtained results, it has been established that using the wood gas as alternative fuel is currently unjustified.