EDPS Account

Volume 19 (2017)

Free Access to the whole issue

E3S Web of Conferences

Volume 19 (2017)

International Conference Energy, Environment and Material Systems (EEMS 2017)

Polanica-Zdrój, Poland, September 13-15, 2017
M. Wzorek, G. Królczyk and A. Król (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 23 October 2017

PDF (205 KB)

Open Access

About the conference

Published online: 23 October 2017

PDF (5.63 MB)

Energy

Open Access

Comparison of low frequency signals emitted by wind turbines of two different generator types 01001

Tomasz Malec, Tomasz Boczar, Daria Wotzka and Paweł Frącz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901001

Open Access

Statistical analysis of the electric energy production from photovoltaic conversion using mobile and fixed constructions 01002

Artur Bugała, Karol Bednarek, Leszek Kasprzyk and Andrzej Tomczewski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901002

Open Access

Determination of the number of Vertical Axis Wind Turbine blades based on power spectrum 01003

Waldemar Fedak, Stanisław Anweiler, Wojciech Gancarski and Roman Ulbrich

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901003

Open Access

Analysis of wind energy generation possibilities with various rotor types at disadvantageous wind condition zones 01004

Andrzej Bieniek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901004

Open Access

Investigation of irregularity of flow distribution across the tube bundle in shell-and-tube heat exchanger with segmental baffles using PIV method 01005

Grzegorz Ligus and Szymon Kołodziej

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901005

Open Access

Characterization and integration of oxidation catalysts at small-scale biomass combustion furnaces 01006

Mirjam Matthes, Ingo Hartmann, Joachim Schenk and Dirk Enke

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901006

Open Access

Projected configuration of a coal-fired district heating source on the basis of comparative technical-economical optimization analysis 01007

Mariusz Tańczuk, Wojciech Radziewicz, Eligiusz Olszewski and Janusz Skorek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901007

Open Access

Co-firing coal and biomass blends and their influence on the post-combustion CO₂ capture installation 01008

Angelika Więckol-Ryk and Adam Smoliński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901008

Open Access

Technical and environmental performance of 10 kW understocker boiler during combustion of biomass and conventional fuels 01009

Robert Junga, Małgorzata Wzorek and Mirosława Kaszubska

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901009

Open Access

Sorption characteristic of coal as regards of gas mixtures emitted in the process of the self-heating of coal 01010

Karolina Wojtacha-Rychter and Adam Smoliński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901010

Open Access

Comparative analysis of heat pump and biomass boiler for small detached house heating 01011

Tomasz Olkowski, Seweryn Lipiński and Aneta Olędzka

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901011

Open Access

Analysis of the efficiency of a hybrid foil tunnel heating system 01012

Sławomir Kurpaska and Norbert Pedryc

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901012

Open Access

Possibility of reducing CO₂ emissions from internal combustion engines 01013

Dawid Drabik, Jarosław Mamala, Michał Śmieja and Krzysztof Prażnowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901013

Open Access

The efficiency of the heat pump water heater, during DHW tapping cycle 01014

Arkadiusz Gużda and Norbert Szmolke

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901014

Open Access

The microclimate parameters change in the occupied zone inside some large-volume buildings with significant influence of the heat emission from people staying inside 01015

Paweł Albert Jelec

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901015

Open Access

A numerical analysis of metrological properties of Venturi tube in the air-coal particle mixture flow measurement in power industry 01016

Grzegorz Borsuk, Bolesław Dobrowolski and Jacek Wydrych

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901016

Open Access

Visual study of capabilities of managing IC engine filling degree vs engine ecological indicators 01017

Szymon Kołodziej and Grzegorz Ligus

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901017

Open Access

Simulation of fuel demand for wood-gas in combustion engine 01018

Katarzyna Botwinska, Remigiusz Mruk, Karol Tucki and Mateusz Wata

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901018

Open Access

Possibility of direct electricity production from waste canola oil 01019

Paweł P. Włodarczyk, Barbara Włodarczyk and Antonina Kalinichenko

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901019

Open Access

Small photovoltaic setup for the air conditioning system 01020

Maciej Masiukiewicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901020

Open Access

Heat demand mapping and district heating grid expansion analysis: Case study of Velika Gorica 01021

Hrvoje Dorotić, Tomislav Novosel, Neven Duić and Tomislav Pukšec

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901021

Open Access

Thermal energy storage in granular deposits 01022

Paweł Ratuszny

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901022

Open Access

Estimation of the cost of electro-mechanical equipment for small hydropower plants – review and comparison of methods 01023

Seweryn Lipiński and Tomasz Olkowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901023

Open Access

Internal heat gain from different light sources in the building lighting systems 01024

Dariusz Suszanowicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901024

Open Access

Single chamber microbial fuel cell with Ni-Co cathode 01025

Barbara Włodarczyk, Paweł P. Włodarczyk and Antonina Kalinichenko

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901025

Open Access

Heat transfer coefficient as parameter describing ability of insulating liquid to heat transfer 01026

Zbigniew Nadolny, Przemysław Gościński and Bolesław Bródka

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901026

Open Access

Analysis of power and energy losses in power systems of electric bus battery charging stations 01027

Jarosław Jajczyk, Arkadiusz Dobrzycki, Michał Filipiak and Dariusz Kurz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901027

Open Access

Online identification of wind model for improving quadcopter trajectory monitoring 01028

Ryszard Beniak and Oleksandr Gudzenko

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901028

Open Access

The computer diagnostic program (DIAG 2) for identifying states of complex technical objects 01029

Stanisław Duer and Dariusz Bernatowicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901029

Open Access

Minimisation of the LCOE for the hybrid power supply system with the lead-acid battery 01030

Leszek Kasprzyk, Andrzej Tomczewski, Karol Bednarek and Artur Bugała

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901030

Open Access

New approach to wireless data communication in a propagation environment 01031

Wojciech P. Hunek and Paweł Majewski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901031

Open Access

Application of numerical model of the photovoltaic module to the practical comparative analysis 01032

Damian Krzesimowski and Artur Pawelec

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901032

Open Access

An innovative hybrid insulation switch to enable/disable electrical loads without overvoltages 01033

Konrad Zajkowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901033

Open Access

The assessment of exploitation process of power for access control system 01034

Michał Wiśnios and Jacek Paś

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901034

Open Access

Comparison of capacitive and inductive sensors designed for partial discharges measurements in electrical power apparatus 01035

Michał Kunicki

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901035

Open Access

New Approaches to Minimum-Energy Design of Integer- and Fractional-Order Perfect Control Algorithms 01036

Wojciech P. Hunek and Łukasz Wach

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901036

Open Access

Settlement of reactive power compensation in the light of white certificates 01037

Konrad Zajkowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901037

Open Access

Creating of structure of facts for the knowledge base of an expert system for wind power plant's equipment diagnosis 01038

Stanisław Duer, Paweł Wrzesień and Radosław Duer

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901038

Open Access

Analysis of the impact of thermal resistance of the roof on the performance of photovoltaic roof tiles 01039

Dariusz Kurz and Ryszard Nawrowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901039

Open Access

Thermal properties of mixtures of mineral oil and natural ester in terms of their application in the transformer 01040

Zbigniew Nadolny and Grzegorz Dombek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901040

Open Access

Influence of the power supply parameters on the projectile energy in the permanent magnet electrodynamic accelerator 01041

Andrzej Waindok and Paweł Piekielny

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901041

Open Access

Mathematical model of optical signals emitted by electrical discharges occuring in electroinsulating oil 01042

Michał Kozioł

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901042

Open Access

Noise variance estimation for Kalman filter 01043

Ryszard Beniak, Oleksandr Gudzenko and Tomasz Pyka

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901043

Open Access

Comparative analysis of cellulose pressboard and aramid paper used in air insulation systems of high-voltage devices 01044

Tomasz Turba and Paweł Frącz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901044

Open Access

Detection of ionizing radiation generated by electrical discharges in the air using sphere-sphere system 01045

Łukasz Nagi

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171901045

Environment

Open Access

Air purification from a mixture VOCs in the pilot-scale trickle-bed bioreactor (TBB) 02001

Rafał Sarzyński, Agnieszka Gąszczak, Daniel Janecki and Grażyna Bartelmus

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902001

Open Access

Influence of calcination process on the formation of selected air pollutants 02002

Jacek Wydrych, Bolesław Dobrowolski, Grzegorz Borsuk and Sławomir Pochwała

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902002

Open Access

Simulation of diesel engine emissions on the example of Fiat Panda in the NEDC test 02003

Katarzyna Botwinska, Remigiusz Mruk, Jacek Słoma, Karol Tucki and Mateusz Zaleski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902003

Open Access

Particulate matter in the rural settlement during winter time 02004

Tomasz Olszowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902004

Open Access

Unmanned Aerial Vehicles for Environmental Monitoring with Special Reference to Heat Loss 02005

Stanisław Anweiler, Dawid Piwowarski and Roman Ulbrich

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902005

Open Access

Aerosol in selected laboratories at Faculty of Mechanical Engineering, Opole University of Technology 02006

Tomasz Olszowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902006

Open Access

Calibration of parameters of water supply network model using genetic algorithm 02007

Tomasz Boczar, Norbert Adamikiewicz and Włodzimierz Stanisławski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902007

Open Access

The removal of chloramphenicol from water through adsorption on activated carbon 02008

Joanna Lach and Agnieszka Ociepa-Kubicka

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902008

Open Access

Analysis of factors affecting the ecological status of the large water bodies on the basis of monitoring and integrated 3D models 02009

Ireneusz Zbiciński and Aleksandra Ziemińska-Stolarska

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902009

Open Access

Model of geothermal water deironing on the basis of a triangulation 02010

Iwona Klosok-Bazan and Robert Olszewski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902010

Open Access

Viscosity of diluted suspensions of vegetal particles in water 02011

Adriana Szydłowska and Jerzy Hapanowicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902011

Open Access

Long-term trends in river flow: a case study of the Soła River (Polish Carpathians) 02012

Mariola Kędra

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902012

Open Access

Examination of coagulant additives on qualitative composition of selected thermal waters 02013

Ewelina Łukasiewicz and Mariusz Rząsa

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902013

Open Access

Analysis of Wastewater Treatment Efficiency in a Soft Drinks Industry 02014

Joanna Boguniewicz-Zabłocka, Andrea G. Capodaglio and Daniel Vogel

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902014

Open Access

Water Loss Reduction as the Basis of Good Water Supply Companies’ Management 02015

Agnieszka Ociepa-Kubicka and Krzysztof Wilczak

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902015

Open Access

Long-term trends in river water temperature: a case study of the Raba River (Polish Carpathians) 02016

Mariola Kędra

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902016

Open Access

Assessment of application of selected waste for production of biogas 02017

Monika Pawlita-Posmyk and Małgorzata Wzorek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902017

Open Access

The study of heavy metals leaching from waste foundry sands using a one-step extraction 02018

Marta Bożym

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902018

Open Access

Leaching of heavy metals from cementitious composites made of new ternary cements 02019

Justyna Kuterasińska-Warwas and Anna Król

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902019

Open Access

Environmental assessment of applicability of mineral-organic composite for landfill area rehabilitation 02020

Kamila Mizerna, Anna Król and Adrian Mróz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902020

Open Access

Environmental, technical and technological aspects of hazardous waste management in Poland 02021

Justyna Pyssa

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902021

Open Access

Sustainable agriculture and protection of the environment 02022

Ewa Siemianowska, Andrzej Wesołowski, Krystyna A. Skibniewska, Józef Tyburski and Marcin Gurzyński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902022

Open Access

Environmental costs resulting from the use of hard coal to electricity generation in Poland 02023

Katarzyna Stala-Szlugaj and Zbigniew Grudziński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902023

Open Access

The influence of shale gas mining activities on the natural environment in Poland 02024

Justyna Pyssa

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902024

Open Access

Analysis of municipal waste generation rate in Poland compared to selected European countries 02025

Beata Klojzy-Karczmarczyk and Said Makoudi

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902025

Open Access

Effect of replacement of tin doped indium oxide (ITO) by ZnO: analysis of environmental impact categories 02026

Aleksandra Ziemińska-Stolarska, Magda Barecka and Ireneusz Zbiciński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902026

Open Access

Eco-Balance analysis of the disused lead-acid-batteries recycling technology 02027

Ewa Kamińska and Tomasz Kamiński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902027

Open Access

Environmental impact of geothermal power plants in Aydın, Turkey 02028

Ersel Yilmaz and Mustafa Ali Kaptan

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902028

Open Access

Health-risk assessment based on an additive to paints made from isobutyric aldehyde condensation products 02029

Wilhelm Jan Tic

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902029

Open Access

Additives for reducing the toxicity of respirable crystalline silica. SILIFE project 02030

Eliseo Monfort, Ana López-Lilao, Alberto Escrig, Maria Jesus Ibáñez, Guliana Bonvicini, Otto Creutzenberg and Christina Ziemann

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902030

Open Access

Environmentally friendly paint and varnish additives based on isobutyrate aldehyde condensation products 02031

Joanna Guziałowska-Tic and Wilhelm Jan Tic

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902031

Open Access

Technical evaluation of photobioreactors for microalgae cultivation 02032

Małgorzata Płaczek, Agnieszka Patyna and Stanisław Witczak

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902032

Open Access

Energy and emergy analysis of mixed crop-livestock farming 02033

Anna Kuczuk, Janusz Pospolita and Stefan Wacław

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902033

Open Access

The use of QSAR methods for determination of n-octanol/water partition coefficient using the example of hydroxyester HE-1 02034

Joanna Guziałowska-Tic

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902034

Open Access

Energy value of soil organic matter and costs of its restoration 02035

Anna Kuczuk

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171902035

Materials

Open Access

Selected problems of gas-liquid flow through the channels filled with metal foams 03001

Roman Dyga and Małgorzata Płaczek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903001

Open Access

The influence of the internal microbiome on the materials used for construction of the transmission natural gas pipelines in the Lodz Province 03002

Agnieszka Staniszewska, Magdalena Jastrzębska and Krzysztof Ziemiński

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903002

Open Access

Assessment of porous material anisotropy and its effect on gas permeability 03003

Grzegorz Wałowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903003

Open Access

Forming of film surface of very viscous liquid flowing with gas in pipes 03004

Krystian Czernek and Stanisław Witczak

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903004

Open Access

Features of single tracks in coaxial laser cladding of a NIbased self-fluxing alloy 03005

Eugene Feldshtein, Oleg Devojno, Marharyta Kardapolava and Nikolaj Lutsko

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903005

Open Access

Experimental studies of thin films deposition by magnetron sputtering method for CIGS solar cell fabrication 03006

Sławomir Gułkowski and Ewelina Krawczak

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903006

Open Access

Effects of hydrogen-charging on the properties of S235JR steel 03007

Izabela Pietkun-Greber

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903007

Open Access

Klinkenberg effect in hydrodynamics of gas flow through anisotropic porous materials 03008

Grzegorz Wałowski and Gabriel Filipczak

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903008

Open Access

Wear of carbide inserts during turning of C45 steel in dry cutting conditions and in presence of emulsion mist 03009

Eugene E. Feldshtein and Szymon Wojciechowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903009

Open Access

Numerical simulation of micro-crack occurring in pipe made of stainless steel 03010

Daria Wotzka

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903010

Open Access

Electrical properties of aluminum contacts deposited by DC sputtering method for photovoltaic applications 03011

Ewelina Krawczak and Sławomir Gułkowski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903011

Open Access

Impact of Fe powder sintering and soldering in production of porous heating surface on flow boiling heat transfer in minichannels 03012

Wojciech Depczyński, Artur Piasecki, Magdalena Piasecka and Kinga Strąk

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903012

Open Access

The use of modern measurement techniques for designing pro ecological constructions 03013

Michał Wieczorowski, Bartosz Gapiński, Maciej Szymański and Artur Rękas

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903013

Open Access

The study on dynamic properties of monolithic ball end mills with various slenderness 03014

Szymon Wojciechowski, Maciej Tabaszewski, Grzegorz M. Krolczyk and Radosław W. Maruda

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903014

Open Access

Effect of Heat Treatment on the Fatigue Life of Steel-Titanium Bimetal 03015

Andrzej Kurek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903015

Open Access

Designing ad hoc temperature fixed point cells 03016

Orest Kochan, Jun Su and Roman Kochan

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903016

Open Access

Verification of new model for determining the critical plane orientation angle 03017

Marta Kurek

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903017

Open Access

Determination of mechanical properties of carbon/epoxy plates by tensile stress test 03018

Paul Bere and Jolanta B. Krolczyk

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903018

Open Access

Materials, used in historical buildings, analysis methods and solutions puroposals 03019

M.Sami Döndüren and Ozlem Sişik

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903019

Open Access

Surface phenomena accompanying plasma gouging of S355 steel 03020

Anatol Kałasznikow and Mariusz Michalski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903020

Open Access

Computational compliance criteria in water hammer modelling 03021

Kamil Urbanowicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903021

Open Access

Numerical analysis of the states of stress in the steel-titanium bimetal during cyclic bending 03022

Grzegorz Robak and Artur Cichański

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903022

Open Access

Designing an accurate system for temperature measurements 03023

Orest Kochan, Jun Su and Roman Kochan

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903023

Open Access

The use of 3d scanner for testing changes in shape of human limbs under the influence of external mechanical load 03024

Kamila Kasperska, Michał Wieczorowski and Jolanta B. Krolczyk

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903024

Open Access

Identification of internal defects of hardfacing coatings in regeneration of machine parts 03025

Jerzy Józwik, Krzysztof Dziedzic, Mykhalo Pashechko and Andrzej Łukasiewicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903025

Open Access

AlSi21CuNi silumin modification with phosphor and strontium micro additions 03026

Mariusz Michalski and Ferdynand Romankiewicz

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903026

Open Access

Evaluation of tribological properties of selected engine oils during operation of the friction pairs of steel-on-steel 03027

Marcin Barszcz, Jerzy Józwik, Krzysztof Dziedzic and Kamil Stec

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903027

Open Access

Analytical and artificial neural network models to estimate the discharge coefficient for ogee spillway 03028

Alpaslan Yarar

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903028

Open Access

Testing of crimp connections made on a prototype stand 03029

Nikodem Wróbel, Michał Rejek and Grzegorz Krolczyk

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903029

Open Access

Behaviour of Strengthened RC Frames with Eccentric Steel Braced Frames 03030

Mehmet Kamanli and Alptug Unal

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903030

Open Access

Influence of long-lasting heat treatments on the structure and properties of the zirconium-steel bond 03031

Mariusz Prażmowski, Henryk Paul, Michał Najwer and Anna Pocica

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903031

Open Access

Investigation of the influence of coolant-lubricant modification on selected effects of pull broaching 03032

Krzysztof Adamczuk, Stanisław Legutko, Alicja Laber and Wojciech Serwa

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903032

Open Access

The measurements of temperature and deformations of car radiators 03033

Katarzyna Peta and Karol Grochalski

Published online: 23 October 2017

DOI: https://doi.org/10.1051/e3sconf/20171903033